| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at
cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix
threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that
cpuset_attach() is also called from cgroup_attach_task_all().
Add cpus_read_lock() like what cgroup_procs_write_start() does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix lock dependency warning with srcu
======================================================
WARNING: possible circular locking dependency detected
6.5.0-kfd-yangp #2289 Not tainted
------------------------------------------------------
kworker/0:2/996 is trying to acquire lock:
(srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0
but task is already holding lock:
((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at:
process_one_work+0x211/0x560
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}:
__flush_work+0x88/0x4f0
svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu]
svm_range_set_attr+0xd6/0x14c0 [amdgpu]
kfd_ioctl+0x1d1/0x630 [amdgpu]
__x64_sys_ioctl+0x88/0xc0
-> #2 (&info->lock#2){+.+.}-{3:3}:
__mutex_lock+0x99/0xc70
amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu]
restore_process_helper+0x22/0x80 [amdgpu]
restore_process_worker+0x2d/0xa0 [amdgpu]
process_one_work+0x29b/0x560
worker_thread+0x3d/0x3d0
-> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}:
__flush_work+0x88/0x4f0
__cancel_work_timer+0x12c/0x1c0
kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu]
__mmu_notifier_release+0xad/0x240
exit_mmap+0x6a/0x3a0
mmput+0x6a/0x120
do_exit+0x322/0xb90
do_group_exit+0x37/0xa0
__x64_sys_exit_group+0x18/0x20
do_syscall_64+0x38/0x80
-> #0 (srcu){.+.+}-{0:0}:
__lock_acquire+0x1521/0x2510
lock_sync+0x5f/0x90
__synchronize_srcu+0x4f/0x1a0
__mmu_notifier_release+0x128/0x240
exit_mmap+0x6a/0x3a0
mmput+0x6a/0x120
svm_range_deferred_list_work+0x19f/0x350 [amdgpu]
process_one_work+0x29b/0x560
worker_thread+0x3d/0x3d0
other info that might help us debug this:
Chain exists of:
srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&svms->deferred_list_work));
lock(&info->lock#2);
lock((work_completion)(&svms->deferred_list_work));
sync(srcu); |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix deadlock or deadcode of misusing dget()
The lock order is incorrect between denty and its parent, we should
always make sure that the parent get the lock first.
But since this deadcode is never used and the parent dir will always
be set from the callers, let's just remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers
The protocol converter configuration registers PCC8, PCCC, PCCD
(implemented by the driver), as well as others, control protocol
converters from multiple lanes (each represented as a different
struct phy). So, if there are simultaneous calls to phy_set_mode_ext()
to lanes sharing the same PCC register (either for the "old" or for the
"new" protocol), corruption of the values programmed to hardware is
possible, because lynx_28g_rmw() has no locking.
Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take
the global spinlock from the phy_ops :: set_mode() implementation. There
are no other callers which modify PCC registers. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Drop chan lock before queuing buffers
Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.
[mani: added fixes tag and cc'ed stable] |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: fix tx statemachine deadlock
When using the serial port as RS485 port, the tx statemachine is used to
control the RTS pin to drive the RS485 transceiver TX_EN pin. When the
TTY port is closed in the middle of a transmission (for instance during
userland application crash), imx_uart_shutdown disables the interface
and disables the Transmission Complete interrupt. afer that,
imx_uart_stop_tx bails on an incomplete transmission, to be retriggered
by the TC interrupt. This interrupt is disabled and therefore the tx
statemachine never transitions out of SEND. The statemachine is in
deadlock now, and the TX_EN remains low, making the interface useless.
imx_uart_stop_tx now checks for incomplete transmission AND whether TC
interrupts are enabled before bailing to be retriggered. This makes sure
the state machine handling is reached, and is properly set to
WAIT_AFTER_SEND. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adis16475: fix deadlock on frequency set
With commit 39c024b51b560
("iio: adis16475: improve sync scale mode handling"), two deadlocks were
introduced:
1) The call to 'adis_write_reg_16()' was not changed to it's unlocked
version.
2) The lock was not being released on the success path of the function.
This change fixes both these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: Fix lockup on kernel exec fault
The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().
Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404b3. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler
Patch fixes the following critical issue caused by deadlock which has been
detected during testing NCM class:
smp: csd: Detected non-responsive CSD lock (#1) on CPU#0
smp: csd: CSD lock (#1) unresponsive.
....
RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0
RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002
RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658
RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658
R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0
Call Trace:
<IRQ>
do_raw_spin_lock+0xc0/0xd0
_raw_spin_lock_irqsave+0x95/0xa0
cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci]
usb_ep_queue+0x35/0x110
eth_start_xmit+0x220/0x3d0 [u_ether]
ncm_tx_timeout+0x34/0x40 [usb_f_ncm]
? ncm_free_inst+0x50/0x50 [usb_f_ncm]
__hrtimer_run_queues+0xac/0x440
hrtimer_run_softirq+0x8c/0xb0
__do_softirq+0xcf/0x428
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x61/0x70
irq_exit_rcu+0xc1/0xd0
sysvec_apic_timer_interrupt+0x52/0xb0
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:do_raw_spin_trylock+0x18/0x40
RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658
RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658
R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000
_raw_spin_lock+0x3d/0x70
? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci]
cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci]
? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci]
? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci]
? irq_thread+0xa0/0x1c0
irq_thread_fn+0x28/0x60
irq_thread+0x105/0x1c0
? __kthread_parkme+0x42/0x90
? irq_forced_thread_fn+0x90/0x90
? wake_threads_waitq+0x30/0x30
? irq_thread_check_affinity+0xe0/0xe0
kthread+0x12a/0x160
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
The root cause of issue is spin_lock/spin_unlock instruction instead
spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler
function. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix deadlock in AP/VLAN handling
Syzbot reports that when you have AP_VLAN interfaces that are up
and close the AP interface they belong to, we get a deadlock. No
surprise - since we dev_close() them with the wiphy mutex held,
which goes back into the netdev notifier in cfg80211 and tries to
acquire the wiphy mutex there.
To fix this, we need to do two things:
1) prevent changing iftype while AP_VLANs are up, we can't
easily fix this case since cfg80211 already calls us with
the wiphy mutex held, but change_interface() is relatively
rare in drivers anyway, so changing iftype isn't used much
(and userspace has to fall back to down/change/up anyway)
2) pull the dev_close() loop over VLANs out of the wiphy mutex
section in the normal stop case |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks
Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown")
added an implementation of the locked_down LSM hook to SELinux, with the aim
to restrict which domains are allowed to perform operations that would breach
lockdown. This is indirectly also getting audit subsystem involved to report
events. The latter is problematic, as reported by Ondrej and Serhei, since it
can bring down the whole system via audit:
1) The audit events that are triggered due to calls to security_locked_down()
can OOM kill a machine, see below details [0].
2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit()
when trying to wake up kauditd, for example, when using trace_sched_switch()
tracepoint, see details in [1]. Triggering this was not via some hypothetical
corner case, but with existing tools like runqlat & runqslower from bcc, for
example, which make use of this tracepoint. Rough call sequence goes like:
rq_lock(rq) -> -------------------------+
trace_sched_switch() -> |
bpf_prog_xyz() -> +-> deadlock
selinux_lockdown() -> |
audit_log_end() -> |
wake_up_interruptible() -> |
try_to_wake_up() -> |
rq_lock(rq) --------------+
What's worse is that the intention of 59438b46471a to further restrict lockdown
settings for specific applications in respect to the global lockdown policy is
completely broken for BPF. The SELinux policy rule for the current lockdown check
looks something like this:
allow <who> <who> : lockdown { <reason> };
However, this doesn't match with the 'current' task where the security_locked_down()
is executed, example: httpd does a syscall. There is a tracing program attached
to the syscall which triggers a BPF program to run, which ends up doing a
bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does
the permission check against 'current', that is, httpd in this example. httpd
has literally zero relation to this tracing program, and it would be nonsensical
having to write an SELinux policy rule against httpd to let the tracing helper
pass. The policy in this case needs to be against the entity that is installing
the BPF program. For example, if bpftrace would generate a histogram of syscall
counts by user space application:
bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }'
bpftrace would then go and generate a BPF program from this internally. One way
of doing it [for the sake of the example] could be to call bpf_get_current_task()
helper and then access current->comm via one of bpf_probe_read_kernel{,_str}()
helpers. So the program itself has nothing to do with httpd or any other random
app doing a syscall here. The BPF program _explicitly initiated_ the lockdown
check. The allow/deny policy belongs in the context of bpftrace: meaning, you
want to grant bpftrace access to use these helpers, but other tracers on the
system like my_random_tracer _not_.
Therefore fix all three issues at the same time by taking a completely different
approach for the security_locked_down() hook, that is, move the check into the
program verification phase where we actually retrieve the BPF func proto. This
also reliably gets the task (current) that is trying to install the BPF tracing
program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since
we're moving this out of the BPF helper's fast-path which can be called several
millions of times per second.
The check is then also in line with other security_locked_down() hooks in the
system where the enforcement is performed at open/load time, for example,
open_kcore() for /proc/kcore access or module_sig_check() for module signatures
just to pick f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix locking in ieee80211_start_ap error path
We need to hold the local->mtx to release the channel context,
as even encoded by the lockdep_assert_held() there. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
After commit 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked()
annotations to find_vma*()"), the call to get_user_pages() will trigger
the mmap assert.
static inline void mmap_assert_locked(struct mm_struct *mm)
{
lockdep_assert_held(&mm->mmap_lock);
VM_BUG_ON_MM(!rwsem_is_locked(&mm->mmap_lock), mm);
}
[ 62.521410] kernel BUG at include/linux/mmap_lock.h:156!
...........................................................
[ 62.538938] RIP: 0010:find_vma+0x32/0x80
...........................................................
[ 62.605889] Call Trace:
[ 62.608502] <TASK>
[ 62.610956] ? lock_timer_base+0x61/0x80
[ 62.614106] find_extend_vma+0x19/0x80
[ 62.617195] __get_user_pages+0x9b/0x6a0
[ 62.620356] __gup_longterm_locked+0x42d/0x450
[ 62.623721] ? finish_wait+0x41/0x80
[ 62.626748] ? __kmalloc+0x178/0x2f0
[ 62.629768] ne_set_user_memory_region_ioctl.isra.0+0x225/0x6a0 [nitro_enclaves]
[ 62.635776] ne_enclave_ioctl+0x1cf/0x6d7 [nitro_enclaves]
[ 62.639541] __x64_sys_ioctl+0x82/0xb0
[ 62.642620] do_syscall_64+0x3b/0x90
[ 62.645642] entry_SYSCALL_64_after_hwframe+0x44/0xae
Use get_user_pages_unlocked() when setting the enclave memory regions.
That's a similar pattern as mmap_read_lock() used together with
get_user_pages(). |
| In camera driver, there is a possible memory corruption due to improper locking. This could lead to local denial of service in kernel. |
| In camera driver, there is a possible memory corruption due to improper locking. This could lead to local denial of service in kernel. |
| PJSIP is a free and open source multimedia communication library written in the C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In various parts of PJSIP, when error/failure occurs, it is found that the function returns without releasing the currently held locks. This could result in a system deadlock, which cause a denial of service for the users. No release has yet been made which contains the linked fix commit. All versions up to an including 2.11.1 are affected. Users may need to manually apply the patch. |
| Metabase is data visualization software. Prior to versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, and 1.42.6, it was possible to circumvent locked parameters when requesting data for a question in an embedded dashboard by constructing a malicious request to the backend. This issue is patched in versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, and 1.42.6. |
| The hashbin_delete function in net/irda/irqueue.c in the Linux kernel before 4.9.13 improperly manages lock dropping, which allows local users to cause a denial of service (deadlock) via crafted operations on IrDA devices. |
| An issue was discovered in illumos before f859e7171bb5db34321e45585839c6c3200ebb90, OmniOS Community Edition r151038, OpenIndiana Hipster 2021.04, and SmartOS 20210923. A local unprivileged user can cause a deadlock and kernel panic via crafted rename and rmdir calls on tmpfs filesystems. Oracle Solaris 10 and 11 is also affected. |
| Race condition in HVMOP_track_dirty_vram in Xen 4.0.0 through 4.4.x does not ensure possession of the guarding lock for dirty video RAM tracking, which allows certain local guest domains to cause a denial of service via unspecified vectors. |
