| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Insecure Default Initialization of Resource vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to read certain confidential information. In the default configuration it is possible to read confidential information about locally configured (administrative) users of the affected system. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S7-EVO on pending commit???; 21.1-EVO versions prior to 21.1R3-S4-EVO on awaiting build; 21.4-EVO versions prior to 21.4R3-S1-EVO; 22.2-EVO versions prior to 22.2R3-EVO; 21.2-EVO versions prior to 21.2R3-S5-EVO on pending commit???; 21.3-EVO version 21.3R1-EVO and later versions; 22.1-EVO version 22.1R1-EVO and later versions; 22.2-EVO versions prior to 22.2R2-S1-EVO. |
| A Use After Free vulnerability in the routing protocol daemon of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause Denial of Service (DoS). In a rib sharding scenario the rpd process will crash shortly after specific CLI command is issued. This issue is more likely to occur in a scenario with high route scale (>1M routes).
This issue affects:
Juniper Networks Junos OS
* 20.2 version 20.2R3-S5 and later versions prior to 20.2R3-S6;
* 20.3 version 20.3R3-S2 and later versions prior to 20.3R3-S5;
* 20.4 version 20.4R3-S1 and later versions prior to 20.4R3-S4
* 21.1 version 21.1R3 and later versions prior to 21.1R3-S3;
* 21.2 version 21.2R1-S2, 21.2R2-S1 and later versions prior to 21.2R3-S2;
* 21.3 version 21.3R2 and later versions prior to 21.3R3;
* 21.4 versions prior to 21.4R2-S1, 21.4R3;
* 22.1 versions prior to 22.1R2.
Juniper Networks Junos OS Evolved
* 20.4-EVO version 20.4R3-S1-EVO and later versions prior to 20.4R3-S6-EVO;
* 21.2-EVO version 21.2R1-S2-EVO and later versions prior to 21.2R3-S4-EVO;
* 21.3-EVO version 21.3R2-EVO and later versions prior to 21.3R3-S1-EVO;
* 21.4-EVO versions prior to 21.4R2-S1-EVO, 21.4R3-EVO;
* 22.1-EVO versions prior to 22.1R2-EVO.
|
| An Improper Input Validation vulnerability in the kernel of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). If the receipt of router advertisements is enabled on an interface and a specifically malformed RA packet is received, memory corruption will happen which leads to an rpd crash. This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved 20.3-EVO version 20.3R1-EVO and later versions; 20.4-EVO versions prior to 20.4R3-S6-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the routing protocol daemon of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). In a BGP rib sharding scenario, when an attribute of an active BGP route is updated memory will leak. As rpd memory usage increases over time the rpd process will eventually run out of memory, crash, and restart. The memory utilization can be monitored with the following CLI commands: show task memory show system processes extensive | match rpd This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2. Juniper Networks Junos OS Evolved 20.3-EVO version 20.3R1-EVO and later versions; 20.4-EVO versions prior to 20.4R3-S6-EVO; 21.2-EVO versions prior to 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO. |
| An OS Command Injection vulnerability in gRPC Network Operations Interface (gNOI) server module of Juniper Networks Junos OS Evolved allows an authenticated, low privileged, network based attacker to inject shell commands and execute code. This issue affects Juniper Networks Junos OS Evolved 21.4 version 21.4R1-EVO and later versions prior to 22.1R1-EVO. |
| A Use After Free vulnerability in the Layer 2 Address Learning Manager (l2alm) of Juniper Networks Junos OS on QFX Series allows an adjacent attacker to cause the Packet Forwarding Engine to crash and restart, leading to a Denial of Service (DoS). The PFE may crash when a lot of MAC learning and aging happens, but due to a Race Condition (Concurrent Execution using Shared Resource with Improper Synchronization) that is outside the attackers direct control. This issue affects: Juniper Networks Junos OS versions prior to 19.4R3-S10 on QFX Series; 20.2 versions prior to 20.2R3-S7 on QFX Series; 20.3 versions prior to 20.3R3-S6 on QFX Series; 20.4 versions prior to 20.4R3-S5 on QFX Series; 21.1 versions prior to 21.1R3-S4 on QFX Series; 21.2 versions prior to 21.2R3-S3 on QFX Series; 21.3 versions prior to 21.3R3-S3 on QFX Series; 21.4 versions prior to 21.4R3 on QFX Series; 22.1 versions prior to 22.1R3 on QFX Series; 22.2 versions prior to 22.2R2 on QFX Series. |
| An Improper Input Validation vulnerability in Juniper Tunnel Driver (jtd) and ICMP module of Juniper Networks Junos OS Evolved allows an unauthenticated attacker within the MPLS administrative domain to send specifically crafted packets to the Routing Engine (RE) to cause a Denial of Service (DoS).
When specifically crafted transit MPLS IPv4 packets are received by the Packet Forwarding Engine (PFE), these packets are internally forwarded to the RE. Continued receipt of these packets may create a sustained Denial of Service (DoS) condition.
This issue affects Juniper Networks Junos OS:
* All versions before 21.2R3-S8-EVO;
* from 21.4-EVO before 21.4R3-S6-EVO;
* from 22.2-EVO before 22.2R3-S4-EVO;
* from 22.3-EVO before 22.3R3-S3-EVO;
* from 22.4-EVO before 22.4R3-EVO;
* from 23.2-EVO before 23.2R2-EVO.
* from 23.4-EVO before 23.4R1-S1-EVO. |
|
An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition.
This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor.
Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability.
This issue affects:
Juniper Networks Junos OS:
* All versions prior to 20.4R3-S8;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S5;
* 22.1 versions prior to 22.1R3-S4;
* 22.2 versions prior to 22.2R3-S2;
* 22.3 versions prior to 22.3R2-S2, 22.3R3-S1;
* 22.4 versions prior to 22.4R2-S1, 22.4R3.
Juniper Networks Junos OS Evolved
* All versions prior to 20.4R3-S8-EVO;
* 21.1 versions 21.1R1-EVO and later;
* 21.2 versions prior to 21.2R3-S6-EVO;
* 21.3 versions prior to 21.3R3-S5-EVO;
* 21.4 versions prior to 21.4R3-S5-EVO;
* 22.1 versions prior to 22.1R3-S4-EVO;
* 22.2 versions prior to 22.2R3-S2-EVO;
* 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO;
* 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO.
|
| A Heap-based Buffer Overflow vulnerability in the telemetry sensor process (sensord) of Juniper Networks Junos OS on MX240, MX480, MX960 platforms using MPC10E causes a steady increase in memory utilization, ultimately leading to a Denial of Service (DoS).
When the device is subscribed to a specific subscription on Junos Telemetry Interface, a slow memory leak occurs and eventually all resources are consumed and the device becomes unresponsive. A manual reboot of the Line Card will be required to restore the device to its normal functioning.
This issue is only seen when telemetry subscription is active.
The Heap memory utilization can be monitored using the following command:
> show system processes extensive
The following command can be used to monitor the memory utilization of the specific sensor
> show system info | match sensord
PID NAME MEMORY PEAK MEMORY %CPU THREAD-COUNT CORE-AFFINITY UPTIME
1986 sensord 877.57MB 877.57MB 2 4 0,2-15 7-21:41:32
This issue affects Junos OS:
* from 21.2R3-S5 before 21.2R3-S7,
* from 21.4R3-S4 before 21.4R3-S6,
* from 22.2R3 before 22.2R3-S4,
* from 22.3R2 before 22.3R3-S2,
* from 22.4R1 before 22.4R3,
* from 23.2R1 before 23.2R2. |
|
A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the Flow-processing Daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos).
On SRX Series devices when two different threads try to simultaneously process a queue which is used for TCP events flowd will crash. One of these threads can not be triggered externally, so the exploitation of this race condition is outside the attackers direct control.
Continued exploitation of this issue will lead to a sustained DoS.
This issue affects Juniper Networks Junos OS:
* 21.2 versions earlier than 21.2R3-S5;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S4;
* 22.1 versions earlier than 22.1R3-S3;
* 22.2 versions earlier than 22.2R3-S1;
* 22.3 versions earlier than 22.3R2-S2, 22.3R3;
* 22.4 versions earlier than 22.4R2-S1, 22.4R3.
This issue does not affect Juniper Networks Junos OS versions earlier than 21.2R1.
|
|
An Improper Handling of Exceptional Conditions vulnerability in BGP session processing of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker, using specific timing outside the attacker's control, to flap BGP sessions and cause the routing protocol daemon (rpd) process to crash and restart, leading to a Denial of Service (DoS) condition. Continued BGP session flapping will create a sustained Denial of Service (DoS) condition.
This issue only affects routers configured with non-stop routing (NSR) enabled. Graceful Restart (GR) helper mode, enabled by default, is also required for this issue to be exploitable.
Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability.
When the BGP session flaps on the NSR-enabled router, the device enters GR-helper/LLGR-helper mode due to the peer having negotiated GR/LLGR-restarter capability and the backup BGP requests for replication of the GR/LLGR-helper session, master BGP schedules, and initiates replication of GR/LLGR stale routes to the backup BGP. In this state, if the BGP session with the BGP peer comes up again, unsolicited replication is initiated for the peer without cleaning up the ongoing GR/LLGR-helper mode replication. This parallel two instances of replication for the same peer leads to the assert if the BGP session flaps again.
This issue affects:
Juniper Networks Junos OS
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S1;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R1-S1, 23.2R2.
Juniper Networks Junos OS Evolved
* All versions earlier than 21.3R3-S5-EVO;
* 21.4 versions earlier than 21.4R3-S5-EVO;
* 22.1 versions earlier than 22.1R3-S4-EVO;
* 22.2 versions earlier than 22.2R3-S3-EVO;
* 22.3 versions earlier than 22.3R3-S1-EVO;
* 22.4 versions earlier than 22.4R2-S2-EVO, 22.4R3-EVO;
* 23.2 versions earlier than 23.2R1-S1-EVO, 23.2R2-EVO.
|
|
A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in telemetry processing of Juniper Networks Junos OS allows a network-based authenticated attacker to flood the system with multiple telemetry requests, causing the Junos Kernel Debugging Streaming Daemon (jkdsd) process to crash, leading to a Denial of Service (DoS). Continued receipt and processing of telemetry requests will repeatedly crash the jkdsd process and sustain the Denial of Service (DoS) condition.
This issue is seen on all Junos platforms. The crash is triggered when multiple telemetry requests come from different collectors. As the load increases, the Dynamic Rendering Daemon (drend) decides to defer processing and continue later, which results in a timing issue accessing stale memory, causing the jkdsd process to crash and restart.
Note: jkdsd is not shipped with SRX Series devices and therefore are not affected by this vulnerability.
This issue affects:
Juniper Networks Junos OS:
* 20.4 versions prior to 20.4R3-S9;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S5;
* 22.1 versions prior to 22.1R3-S4;
* 22.2 versions prior to 22.2R3-S2;
* 22.3 versions prior to 22.3R2-S1, 22.3R3-S1;
* 22.4 versions prior to 22.4R2-S2, 22.4R3;
* 23.1 versions prior to 23.1R2.
This issue does not affect Juniper Networks Junos OS versions prior to 19.4R1.
|
| An Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Connectivity Fault Management(CFM) module of Juniper Networks Junos OS on MX Series(except MPC10, MPC11 and LC9600) allows an adjacent attacker on the local broadcast domain to cause a Denial of Service(DoS).
Upon receiving a malformed CFM packet, the MPC crashes. Continued receipt of these packets causes a sustained denial of service. This issue can only be triggered when CFM hasn't been configured.
This issue affects:
Juniper Networks Junos OS
All versions prior to 19.1R3-S10 on MX Series;
19.2 versions prior to 19.2R3-S7 on MX Series;
19.3 versions prior to 19.3R3-S8 on MX Series;
19.4 versions prior to 19.4R3-S12 on MX Series;
20.1 version 20.1R1 and later versions on MX Series;
20.2 versions prior to 20.2R3-S7 on MX Series;
20.3 version 20.3R1 and later versions on MX Series;
20.4 versions prior to 20.4R3-S7 on MX Series;
21.1 versions prior to 21.1R3-S5 on MX Series;
21.2 versions prior to 21.2R3-S4 on MX Series;
21.3 versions prior to 21.3R3-S4 on MX Series;
21.4 versions prior to 21.4R3-S3 on MX Series;
22.1 versions prior to 22.1R3-S2 on MX Series;
22.2 versions prior to 22.2R3 on MX Series;
22.3 versions prior to 22.3R2, 22.3R3 on MX Series;
22.4 versions prior to 22.4R2 on MX Series.
|
| An Improper Check or Handling of Exceptional Conditions vulnerability in the Layer-2 control protocols daemon (l2cpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS).
When a malformed LLDP packet is received, l2cpd will crash and restart. The impact of the l2cpd crash is reinitialization of STP protocols (RSTP, MSTP or VSTP), and MVRP and ERP. Also, if any services depend on LLDP state (like PoE or VoIP device recognition), then these will also be affected. Continued receipt of such packets will lead to a sustained Denial of Service.
This issue affects:
Juniper Networks Junos OS
21.4 versions prior to 21.4R3-S3;
22.1 versions prior to 22.1R3-S3;
22.2 versions prior to 22.2R2-S1, 22.2R3;
22.3 versions prior to 22.3R2.
Juniper Networks Junos OS Evolved
21.4-EVO versions prior to 21.4R3-S2-EVO;
22.1-EVO versions prior to 22.1R3-S3-EVO;
22.2-EVO versions prior to 22.2R2-S1-EVO, 22.2R3-EVO;
22.3-EVO versions prior to 22.3R2-EVO.
|
| An Improper Handling of Undefined Values vulnerability in the periodic packet management daemon (PPMD) of Juniper Networks Junos OS on MX Series(except MPC10, MPC11 and LC9600) allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS).
When a malformed CFM packet is received, it leads to an FPC crash. Continued receipt of these packets causes a sustained denial of service. This vulnerability occurs only when CFM has been configured on the interface.
This issue affects Juniper Networks Junos OS:
versions prior to 19.1R3-S10 on MX Series;
19.2 versions prior to 19.2R3-S7 on MX Series;
19.3 versions prior to 19.3R3-S8 on MX Series;
19.4 versions prior to 19.4R3-S12 on MX Series;
20.1 version 20.1R1 and later versions on MX Series;
20.2 versions prior to 20.2R3-S8 on MX Series;
20.3 version 20.3R1 and later versions on MX Series;
20.4 versions prior to 20.4R3-S7 on MX Series;
21.1 versions prior to 21.1R3-S5 on MX Series;
21.2 versions prior to 21.2R3-S5 on MX Series;
21.3 versions prior to 21.3R3-S4 on MX Series;
21.4 versions prior to 21.4R3-S4 on MX Series;
22.1 versions prior to 22.1R3-S3 on MX Series;
22.2 versions prior to 22.2R3-S1 on MX Series;
22.3 versions prior to 22.3R3 on MX Series;
22.4 versions prior to 22.4R1-S2, 22.4R2 on MX Series.
|
| A Reachable Assertion vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a locally-based, low-privileged attacker to cause a Denial of Service (DoS).
On all Junos OS and Junos OS Evolved, when a specific L2VPN command is run, RPD will crash and restart. Continued execution of this specific command will create a sustained Denial of Service (DoS) condition.
This issue affects:
Juniper Networks Junos OS
All versions prior to 19.3R3-S10;
20.1 versions prior to 20.1R3-S4;
20.2 versions prior to 20.2R3-S6;
20.3 versions prior to 20.3R3-S6;
20.4 versions prior to 20.4R3-S5;
21.1 versions prior to 21.1R3-S4;
21.2 versions prior to 21.2R3-S3;
21.3 versions prior to 21.3R3-S2;
21.4 versions prior to 21.4R3;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R2;
Juniper Networks Junos OS Evolved
All versions prior to 20.4R3-S7-EVO;
21.1 versions prior to 21.1R3-S3-EVO;
21.2 versions prior to 21.2R3-S5-EVO;
21.3 versions prior to 21.3R3-S4-EVO;
21.4 versions prior to 21.4R3-EVO;
22.1 versions prior to 22.1R3-EVO;
22.2 versions prior to 22.2R2-EVO;
22.3 versions prior to 22.3R2-EVO;
|
| An Out-of-bounds Read vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a local, authenticated attacker with low privileges, to cause a Denial of Service (DoS).
If a low privileged user executes a specific CLI command, flowd which is responsible for traffic forwarding in SRX crashes and generates a core dump. This will cause temporary traffic interruption until the flowd process is restarted automatically. Continued execution of this command will lead to a sustained DoS.
This issue affects Juniper Networks Junos OS on SRX Series:
All versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S6;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S4;
21.3 versions prior to 21.3R3-S4;
21.4 versions prior to 21.4R3-S3;
22.1 versions prior to 22.1R3-S1;
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2;
22.4 versions prior to 22.4R1-S1, 22.4R2.
|
| A Use of an Uninitialized Resource vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial of Service (DoS).
On all Junos OS and Junos OS Evolved platforms, in a Multicast only Fast Reroute (MoFRR) scenario, the rpd process can crash when a a specific low privileged CLI command is executed. The rpd crash will impact all routing protocols until the process has automatically been restarted. As the operational state which makes this issue exploitable is outside the attackers control, this issue is considered difficult to exploit. Continued execution of this command will lead to a sustained DoS.
This issue affects:
Juniper Networks Junos OS
19.4 version 19.4R3-S5 and later versions prior to 19.4R3-S9;
20.1 version 20.1R2 and later versions;
20.2 versions prior to 20.2R3-S7;
20.3 versions prior to 20.3R3-S5;
20.4 versions prior to 20.4R3-S6;
21.1 versions prior to 21.1R3-S4;
21.2 versions prior to 21.2R3-S2;
21.3 versions prior to 21.3R3-S1;
21.4 versions prior to 21.4R3;
22.1 versions prior to 22.1R1-S2, 22.1R2;
22.2 versions prior to 22.2R2.
Juniper Networks Junos OS Evolved
All versions prior to 20.4R3-S6-EVO;
21.1-EVO version 21.1R1-EVO and later versions;
21.2-EVO version 21.2R1-EVO and later versions;
21.3-EVO versions prior to 21.3R3-S1-EVO;
21.4-EVO versions prior to 21.4R3-EVO;
22.1-EVO versions prior to 22.1R1-S2-EVO, 22.1R2-EVO;
22.2-EVO versions prior to 22.2R2-EVO.
|
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on QFX10000 Series allows a network based attacker to cause a Denial of Service (DoS).
If a specific valid IP packet is received and that packet needs to be routed over a VXLAN tunnel, this will result in a PFE wedge condition due to which traffic gets impacted. As this is not a crash and restart scenario, this condition will persist until the system is rebooted to recover.
This issue affects Juniper Networks Junos OS on QFX10000:
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S5;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S5;
21.3 versions prior to 21.3R3-S4;
21.4 versions prior to 21.4R3-S1;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R1-S2, 22.3R2.
|
| An Incomplete Internal State Distinction vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series allows an adjacent attacker to cause a Denial of Service (DoS).
If an SRX is configured in L2 transparent mode the receipt of a specific genuine packet can cause a single Packet Processing Engines (PPE) component of the PFE to run into a loop, which in turn will render the PPE unavailable. Each packet will cause one PPE to get into a loop, leading to a gradual performance degradation until all PPEs are unavailable and all traffic processing stops. To recover the affected FPC need to be restarted.
This issue affects Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series:
20.1 version 20.1R1 and later versions;
20.2 versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S7;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S3;
21.3 versions prior to 21.3R3-S3;
21.4 versions prior to 21.4R3-S1;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R1-S1, 22.3R2.
|
