| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
| Heap-based Buffer Overflow vulnerability in Apache Thrift C++ bindings.
This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. In versions prior to 7.1.2-26he, the `-concatenate` operation is missing policy checks, potentially resulting in both reading and writing to paths disallowed by the security policy. This issue has been fixed in version 7.1.2-26. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.8 before 19.0.5, 19.1 before 19.1.3, and 19.2 before 19.2.1 that under certain conditions could have allowed an unauthenticated user to view the title of a confidential issue through a publicly accessible merge request due to improper authorization checks. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 19.1 before 19.1.3 and 19.2 before 19.2.1 that under certain conditions could have allowed an authenticated user to bypass administrator-configured tool governance policies due to improper authorization enforcement during token generation. |
| In subsys/debug/coredump/coredump_shell.c, print_coredump_hdr() used the 16-bit tgt_code field of a stored Zephyr coredump header directly as an index into coredump_target_code2str[], a fixed 7-element array of string pointers, with no bounds check.
A stored coredump whose tgt_code is >= 7 causes an out-of-bounds read of a char* up to ~64K entries past the array; that value is passed as the %s argument to shell_print, which dereferences and walks it as a string. The result is either disclosure of device memory contents to the shell user or a crash when the out-of-bounds pointer is unmapped.
The defect is reached via the coredump print shell command (cmd_coredump_print_stored_dump -> pretty_print_coredump -> parse_and_print_coredump -> print_coredump_hdr). The tgt_code field is device-generated and in-range during normal crash handling, so triggering requires local shell access plus the ability to stage or corrupt the stored coredump in the flash/in-memory backend.
Introduced in v4.2.0 (commit 13abd7fe730) and present through v4.4.0; fixed by clamping out-of-range codes to the 'unknown' (index 0) entry. |
| Integer underflow (wrap or wraparound) in Windows NT OS Kernel allows an authorized attacker to elevate privileges locally. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper Validation of Specified Quantity in Input in the ASUS AI Suite 3 driver allows a local user to bypass security validation and access restricted memory blocks via crafted IOCTL requests, leading to privilege escalation.
Refer to the 'End-of-Life Notice and Driver Update for Legacy ASUS Drivers ' section on the ASUS Security Advisory for more information. |
| 7-Zip XZ Decompression Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of 7-Zip. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the processing of XZ chunked data. Crafted XZ-compressed data can trigger an overflow of a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-30169. |
| A flaw exists in the org.keycloak.broker.oidc package where the OIDC broker incorrectly synchronizes the email_verified claim. When an OIDC identity provider is configured with trustEmail=true and the userinfo endpoint is enabled, Keycloak retrieves the email address from the userinfo response but retrieves the email_verified status exclusively from the id_token.
The root cause is a lack of validation ensuring that the email_verified claim in the id_token actually refers to the email address returned by the userinfo endpoint. If these two sources return different email addresses, the id_token's email_verified=true claim is blindly applied to the userinfo email.
Exploitation Conditions:
The OIDC identity provider must have trustEmail set to true (non-default).
The userinfo endpoint must be enabled (default).
The attacker must control or have compromised the upstream OIDC provider.
Concrete Impact:
Mark arbitrary email addresses as verified in the Keycloak database.
Bypass email-based security controls or verification workflows.
Potential account takeover if the application relies solely on the email_verified flag from the IdP to link accounts. |
| A vulnerability in the DMG file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in DMG files during scanning, which may result in an integer overflow on 32-bit platforms only. An attacker could exploit this vulnerability by submitting a crafted file that contains DMG content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| A vulnerability in the ALZ file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in ALZ files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains ALZ content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. In versions from 2.0.0 prior to 2.16.0 and from 3.0.0.Beta1 prior to 3.0.11, ThreadSafeCookieStore stored a cookie under the value of its Domain attribute without verifying that the responding host is allowed to set a cookie for that domain, leading to a cookie tossing / cookie injection issue. A host the client connects to can therefore plant a cookie scoped to an unrelated domain, and the client will then send that cookie on later requests to that domain. Applications that use a single AsyncHttpClient instance - and thus the default, shared CookieStore - to reach both an attacker-influenced host and a trusted host are impacted. This issue has been fixed in versions 2.16.0 and 3.0.11. |
| A vulnerability in the FSG file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in FSG files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains portable executable content compressed with FSG to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| A type confusion vulnerability in Qt SVG allows an attacker to cause an application crash via a crafted SVG image.
When processing SVG marker references, the renderer retrieves a node by its id attribute and casts it to QSvgMarker* without verifying the node type. A non-marker element (such as a <line> element) that references itself as a marker triggers an out-of-bounds heap read due to the object size difference between QSvgLine and QSvgMarker,
followed by an endless recursion that bypasses the marker recursion
guard through incorrect virtual dispatch. The result is an application
crash (denial of service).
This issue affects Qt SVG:
from 6.7.0 before 6.8.8, from 6.9.0 before 6.11.1. |
| Allocation of Resources Without Limits or Throttling, Improper Validation of Specified Quantity in Input vulnerability in The Qt Company Qt on Windows, MacOS, Linux, iOS, Android, x86, ARM, 64 bit, 32 bit allows Excessive Allocation.
This issue affects users of the Text component in Qt Quick. Missing validation of the width and height in the <img> tag could cause an application to become unresponsive.
This issue affects Qt: from 5.0.0 through 6.5.10, from 6.6.0 through 6.8.5, from 6.9.0 through 6.10.0. |
| NVIDIA TensorRT-LLM contains a vulnerability where an attacker could cause a write-what-where condition. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssi_module module. This vulnerability may exist when the Server-Side Includes (SSI), proxy_pass, and proxy_buffering off directives are configured. With this configuration, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to cause a use-after-free in the NGINX worker process. This issue may lead to limited modification of memory or a restart of the NGINX worker process.
Impact:
This vulnerability may allow remote attackers to have limited control to modify memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow
On the non-root path, __tb_property_parse_dir() takes dir_len from
entry->length (u16 widened to size_t). Two distinct OOB conditions
follow when entry->length < 4:
1. The non-root path begins with kmemdup(&block[dir_offset],
sizeof(*dir->uuid), ...) which always reads 4 dwords from
dir_offset. tb_property_entry_valid() only enforces
dir_offset + entry->length <= block_len, so a crafted entry
with dir_offset close to the end of the property block and
entry->length in 0..3 passes that gate but lets the UUID copy
run off the block (e.g. dir_offset = 497, dir_len = 3 in a
500-dword block reads block[497..501]).
2. After the kmemdup, content_len = dir_len - 4 underflows size_t
to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry
walk runs OOB on each iteration until an entry fails
validation or the kernel oopses on an unmapped page.
Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,
which closes both holes.
Also move INIT_LIST_HEAD(&dir->properties) up to immediately after
the dir allocation so the new error-return path (and the existing
uuid-alloc failure path) calling tb_property_free_dir() sees a
walkable list rather than the zero-initialized NULL next/prev that
list_for_each_entry_safe() would oops on. |
