| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 18.6, watchOS 11.6, iOS 18.6 and iPadOS 18.6, iPadOS 17.7.9, tvOS 18.6, macOS Sequoia 15.6, visionOS 2.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A use-after-free issue was addressed by removing the vulnerable code. This issue is fixed in macOS Sequoia 15.6, iPadOS 17.7.9, macOS Ventura 13.7.7, macOS Sonoma 14.7.7. An attacker may be able to cause unexpected app termination. |
| A use-after-free flaw was found in xorg-x11-server-Xvfb. This issue occurs in Xvfb with a very specific and legacy configuration (a multi-screen setup with multiple protocol screens, also known as Zaphod mode). If the pointer is warped from a screen 1 to a screen 0, a use-after-free issue may be triggered during shutdown or reset of the Xvfb server, allowing for possible escalation of privileges or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: always refresh the queue when reading sock
After recent changes in net-next TCP compacts skbs much more
aggressively. This unearthed a bug in TLS where we may try
to operate on an old skb when checking if all skbs in the
queue have matching decrypt state and geometry.
BUG: KASAN: slab-use-after-free in tls_strp_check_rcv+0x898/0x9a0 [tls]
(net/tls/tls_strp.c:436 net/tls/tls_strp.c:530 net/tls/tls_strp.c:544)
Read of size 4 at addr ffff888013085750 by task tls/13529
CPU: 2 UID: 0 PID: 13529 Comm: tls Not tainted 6.16.0-rc5-virtme
Call Trace:
kasan_report+0xca/0x100
tls_strp_check_rcv+0x898/0x9a0 [tls]
tls_rx_rec_wait+0x2c9/0x8d0 [tls]
tls_sw_recvmsg+0x40f/0x1aa0 [tls]
inet_recvmsg+0x1c3/0x1f0
Always reload the queue, fast path is to have the record in the queue
when we wake, anyway (IOW the path going down "if !strp->stm.full_len"). |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Avoid a bad reference count on CPU node
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove register from DCN35 DMCUB diagnostic collection
[Why]
These registers should not be read from driver and triggering the
security violation when DMCUB work times out and diagnostics are
collected blocks Z8 entry.
[How]
Remove the register read from DCN35. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Always pass notifications when child class becomes empty
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent. |
| A use-after-free flaw was found in vmxnet3_rq_alloc_rx_buf in drivers/net/vmxnet3/vmxnet3_drv.c in VMware's vmxnet3 ethernet NIC driver in the Linux Kernel. This issue could allow a local attacker to crash the system due to a double-free while cleaning up vmxnet3_rq_cleanup_all, which could also lead to a kernel information leak problem. |
| There is a possible UAF due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In lwis_device_event_states_clear_locked of lwis_event.c, there is a possible privilege escalation due to a double free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A vulnerability has been found in HDF5 up to 1.14.6 and classified as problematic. This vulnerability affects the function H5MM_realloc of the file src/H5MM.c. The manipulation of the argument mem leads to double free. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in HDF5 up to 1.14.6. It has been rated as critical. Affected by this issue is the function H5FL__blk_gc_list of the file src/H5FL.c. The manipulation of the argument H5FL_blk_head_t leads to use after free. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. |
| Windows Kernel Elevation of Privilege Vulnerability |
| An issue was discovered in the Linux kernel through 5.10.11. PI futexes have a kernel stack use-after-free during fault handling, allowing local users to execute code in the kernel, aka CID-34b1a1ce1458. |
| A flaw was found in the Linux kernel’s futex implementation. This flaw allows a local attacker to corrupt system memory or escalate their privileges when creating a futex on a filesystem that is about to be unmounted. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. |
| In gpu_slc_get_region of pixel_gpu_slc.c, there is a possible EoP due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| An Improper Resolution of Path Equivalence vulnerability [CWE-41] in FortiPortal 7.4.0 through 7.4.2, 7.2.0 through 7.2.6, 7.0.0 through 7.0.11 may allow a remote unauthenticated attacker to retrieve source code via crafted HTTP requests. |
| The JsonToBinaryStream() function is part of the protocol buffers C++ implementation and is used to parse JSON from a stream. If the input is broken up into separate chunks in a certain way, the parser will attempt to read bytes from a chunk that has already been freed.
|
| There exists a use after free vulnerability in Reverb. Reverb supports the VARIANT datatype, which is supposed to represent an arbitrary object in C++. When a tensor proto of type VARIANT is unpacked, memory is first allocated to store the entire tensor, and a ctor is called on each instance. Afterwards, Reverb copies the content in tensor_content to the previously mentioned pre-allocated memory, which results in the bytes in tensor_content overwriting the vtable pointers of all the objects which were previously allocated. Reverb exposes 2 relevant gRPC endpoints: InsertStream and SampleStream. The attacker can insert this stream into the server’s database, then when the client next calls SampleStream they will unpack the tensor into RAM, and when any method on that object is called (including its destructor) the attacker gains control of the Program Counter. We recommend upgrading past git commit https://github.com/google-deepmind/reverb/commit/6a0dcf4c9e842b7f999912f792aaa6f6bd261a25 |
| Dave Gamble cJSON version 1.7.3 and earlier contains a CWE-416: Use After Free vulnerability in cJSON library that can result in Possible crash, corruption of data or even RCE. This attack appear to be exploitable via Depends on how application uses cJSON library. If application provides network interface then can be exploited over a network, otherwise just local.. This vulnerability appears to have been fixed in 1.7.4. |
