| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed()
cxl_payload_from_user_allowed() casts and dereferences the input
payload without first verifying its size. When a raw mailbox command
is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG,
which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer,
triggering a KASAN splat:
BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683
Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258
CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xce/0x650 mm/kasan/report.c:482
kasan_report+0xce/0x100 mm/kasan/report.c:595
memcmp+0x176/0x1d0 lib/string.c:683
uuid_equal include/linux/uuid.h:73 [inline]
cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline]
cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline]
cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline]
cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643
__cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline]
cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdaf331ba79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79
RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003
RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768
</TASK>
Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate
the payload is large enough. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
(cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4) |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: bound check rq_pages index in inline path
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix rcu_read_unlock() deadloop due to IRQ work
During rcu_read_unlock_special(), if this happens during irq_exit(), we
can lockup if an IPI is issued. This is because the IPI itself triggers
the irq_exit() path causing a recursive lock up.
This is precisely what Xiongfeng found when invoking a BPF program on
the trace_tick_stop() tracepoint As shown in the trace below. Fix by
managing the irq_work state correctly.
irq_exit()
__irq_exit_rcu()
/* in_hardirq() returns false after this */
preempt_count_sub(HARDIRQ_OFFSET)
tick_irq_exit()
tick_nohz_irq_exit()
tick_nohz_stop_sched_tick()
trace_tick_stop() /* a bpf prog is hooked on this trace point */
__bpf_trace_tick_stop()
bpf_trace_run2()
rcu_read_unlock_special()
/* will send a IPI to itself */
irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
A simple reproducer can also be obtained by doing the following in
tick_irq_exit(). It will hang on boot without the patch:
static inline void tick_irq_exit(void)
{
+ rcu_read_lock();
+ WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, true);
+ rcu_read_unlock();
+
[neeraj: Apply Frederic's suggested fix for PREEMPT_RT] |
| In the Linux kernel, the following vulnerability has been resolved:
rv: Use strings in da monitors tracepoints
Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds read in add_missing_indices
stbl is s8 but it must contain offsets into slot which can go from 0 to
127.
Added a bound check for that error and return -EIO if the check fails.
Also make jfs_readdir return with error if add_missing_indices returns
with an error. |
| In the Linux kernel, the following vulnerability has been resolved:
spi-rockchip: Fix register out of bounds access
Do not write native chip select stuff for GPIO chip selects.
GPIOs can be numbered much higher than native CS.
Also, it makes no sense. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: fix out-of-bounds read during lookup
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: check for overflows in io_pin_pages
WARNING: CPU: 0 PID: 5834 at io_uring/memmap.c:144 io_pin_pages+0x149/0x180 io_uring/memmap.c:144
CPU: 0 UID: 0 PID: 5834 Comm: syz-executor825 Not tainted 6.12.0-next-20241118-syzkaller #0
Call Trace:
<TASK>
__io_uaddr_map+0xfb/0x2d0 io_uring/memmap.c:183
io_rings_map io_uring/io_uring.c:2611 [inline]
io_allocate_scq_urings+0x1c0/0x650 io_uring/io_uring.c:3470
io_uring_create+0x5b5/0xc00 io_uring/io_uring.c:3692
io_uring_setup io_uring/io_uring.c:3781 [inline]
...
</TASK>
io_pin_pages()'s uaddr parameter came directly from the user and can be
garbage. Don't just add size to it as it can overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix out-of-bounds access of directory entries
In the case of the directory size is greater than or equal to
the cluster size, if start_clu becomes an EOF cluster(an invalid
cluster) due to file system corruption, then the directory entry
where ei->hint_femp.eidx hint is outside the directory, resulting
in an out-of-bounds access, which may cause further file system
corruption.
This commit adds a check for start_clu, if it is an invalid cluster,
the file or directory will be treated as empty. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Patchwork: https://patchwork.freedesktop.org/patch/624696/ |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to shrink read extent node in batches
We use rwlock to protect core structure data of extent tree during
its shrink, however, if there is a huge number of extent nodes in
extent tree, during shrink of extent tree, it may hold rwlock for
a very long time, which may trigger kernel hang issue.
This patch fixes to shrink read extent node in batches, so that,
critical region of the rwlock can be shrunk to avoid its extreme
long time hold. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO
Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.
To show a concrete example of the problem:
0000000000000000 <prog>:
0: r2 = *(u32 *)(r1 + 80)
1: r1 = *(u32 *)(r1 + 76)
2: r3 = r1
3: r3 += 4
4: if r3 > r2 goto +18 <LBB5_5>
5: w2 = 0
6: *(u32 *)(r1 + 0) = r2
7: r1 = *(u32 *)(r1 + 0)
8: r2 = 1
9: if w1 == 0 goto +1 <LBB5_3>
10: r2 = -1
0000000000000058 <LBB5_3>:
11: r1 = 0 ll
13: r3 = 0
14: call bpf_ringbuf_reserve
15: if r0 == 0 goto +7 <LBB5_5>
16: r1 = r0
17: r1 += 16777215
18: w2 = 0
19: *(u8 *)(r1 + 0) = r2
20: r1 = r0
21: r2 = 0
22: call bpf_ringbuf_submit
00000000000000b8 <LBB5_5>:
23: w0 = 0
24: exit
For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.
If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.
The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.
Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).
A simplified test case has been included in the next patch to prevent
future regressions. |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in
the `IMAP APPEND {N}` literal while transmitting line-ending expanded data.
The server reads only $N$ bytes for the payload, causing the remaining
overflow bytes to be interpreted and executed as pipelined IMAP commands
within the authenticated session. |
| ProFTPD before 1.3.9e and 1.3.10rc5 contains a buffer overflow vulnerability in the mod_rewrite int:utf8trans RewriteMap that allows remote attackers to overwrite static buffers. Attackers can send FTP command arguments longer than 1024 bytes, without authentication if pre-login commands are rewritten, to corrupt session memory and crash the session. |
| A flaw was found in GLib. An off-by-one error can occur in the g_key_file_get_locale_string_list function in the gkeyfile.c file when loading a key file with an empty value. This flaw can cause an out-of-bounds access of 1 byte or a denial of service when the out-of-bounds access crosses a page boundary. |
