| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| PipesHub 0.3.0 before 0.10.0 contains an event type injection vulnerability that allows authenticated users with only the crawl:write scope to delete connectors by injecting into the :connector path segment. Attackers can send a :connector value like web.delete to the schedule route, bypassing connector:delete and lock checks to remove connector instances and purge record embeddings. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: fix out-of-bounds read in HCP header parsing
Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read
packet->header from skb->data at function entry without first checking
that the buffer holds at least one byte. A malicious NFC peer can send
a 0-byte HCP frame that passes through the SHDLC layer and reaches
these functions, causing an out-of-bounds heap read of packet->header.
The same 0-byte frame, if queued as a non-final fragment, also causes
the reassembly loop to underflow msg_len to UINT_MAX, triggering
skb_over_panic() when the reassembled skb is written.
Fix this by adding a pskb_may_pull() check at the entry of each
function before packet->header is first accessed. The existing
pskb_may_pull() checks before the reassembled hcp_skb is cast to
struct hcp_packet remain in place to guard the 2-byte HCP message
header. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing. |
| An out-of-bounds write vulnerability in the Qt Framework assimp scene import plugin of the Qt3D module. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| Memory corruption in Autofill in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| DataCap through 2025.1.1 contains a missing authorization vulnerability that allows any authenticated user to escalate privileges by calling administrative role and menu management APIs. Attackers, including self-registered accounts, can send PUT requests to /api/v1/user/allocationRole to assign themselves the administrator role and gain full control of the instance. |
| Flowise through 3.1.4 contains a sandbox escape vulnerability that allows authenticated users to execute OS commands by abusing allowlisted langchain and mammoth modules when ALLOW_BUILTIN_DEP=true. Attackers can submit JavaScript to /api/v1/node-custom-function that writes a file into the mammoth package via LocalFileStore and requires it, escaping vm2 as the Flowise process user. |
| A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system. |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. |
| A flaw was found in MRTG. When the MRTG daemon is started as a root user and subsequently drops privileges, a local, low-privileged attacker can exploit a symbolic link (symlink) following vulnerability. By influencing or pre-placing a symlink in the process ID (PID) file path, the attacker can trick the root process into changing the ownership of an arbitrary existing file to the daemon user. This can lead to local privilege escalation, allowing unauthorized access to or modification of sensitive files. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack. |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP options, such as a malicious root-path, next-server, or bootfile name, to a system using dracut's NetworkManager-based initrd network module. These options are improperly handled and written into a temporary shell script without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs during system boot. |
| A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| sniproxy through 0.7.0 contains a NULL pointer dereference vulnerability in resolv_cancel() that allows remote unauthenticated attackers to crash the daemon by sending overlong hostnames. Attackers can send a 254 or 255 character TLS SNI name or HTTP Host header matching a wildcard backend, then close the connection to terminate the proxy. |
| Kubeflow Pipelines enables users to build and deploy portable, scalable machine learning workflows. Prior to 2.18.0, the API server decompressed uploaded pipeline archives without adequately bounding expanded data while locating or reading the pipeline file. A small ZIP or gzip-compressed tar archive can consume disproportionately large memory and exhaust API-server resources. Multipart pipeline and pipeline-version upload processing performs decompression before namespace authorization, so a reachable caller does not need a successful pipeline-create authorization decision. URL-import handlers authorize before fetching and decompressing a remote archive. The amount of expansion required to interrupt service depends on deployment resource limits and concurrent activity, and no specific archive is guaranteed to crash every deployment. This issue is fixed in version 2.18.0. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used forge.tls.createConnection(), fragmented handshake message, interleaved record to process the relevant input or security decision. node-forge continued processing after a TLS record of another content type interrupted a fragmented handshake message. A remote peer could trigger an uncaught TypeError in process(), causing the connection or hosting process to fail. This issue is fixed in version 1.4.1. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.5, binary REAL decoding builds a large mantissa one octet at a time by shifting a growing integer and slicing the remaining byte string. Attacker-controlled ASN.1 includes a binary-encoded REAL with a large mantissa and reaches BER, CER, or DER decode(), with or without a schema containing REAL. RealPayloadDecoder.valueDecoder repeatedly performs a left shift, OR, and suffix copy for every mantissa octet, making decode time quadratic in mantissa length. A comparatively small REAL value can hold a decoding worker on one CPU core for seconds or longer and cause availability loss. This issue is fixed in version 0.6.5. |
