| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SOEM version 2.0.0 and earlier contains a vulnerability where a malicious device can crash the master system. When the software receives an error response, it clears an internal pointer but continues processing. If another message arrives before timeout, the software attempts to use the cleared pointer, causing a crash. An attacker can trigger this with a simple sequence of two messages. |
| SOEM version 2.0.0 and earlier contains a vulnerability during device configuration where a malicious device can cause memory corruption. The software writes configuration data to a fixed-size array without checking if the array index exceeds its maximum size of EC_MAXFMMU entries. A device presenting more than EC_MAXFMMU configuration blocks can force writes beyond the array boundary, corrupting adjacent memory structures and potentially disrupting subsequent operations. |
| SOEM version 2.0.0 and earlier contains vulnerabilities where a malicious device can send messages that cause the master to read data from memory locations beyond the intended buffer. The software uses length values from device responses without validating them against actual buffer sizes. An attacker can exploit this to extract up to 64KB of data from the master's memory. |
| Reflected Cross-Site Scripting (XSS) in Gym Management Software IsMyGym by Zuinq Studio affecting the reservation endpoint where the 'ret' parameter is reflected in the HTTP response without any proper sanitization. Successfull explotation of this vulnerability could allow an attacker to inject arbitrary JavaScript code executed in the context of the victim’s browser. |
| Incorrect Authorization vulnerability in ash-project ash_postgres allows a user to read another tenant's record through a skipped upsert.
When Ash.bulk_create/4 or a single create runs as an upsert with return_skipped_upsert?: true and the upsert is skipped (for example because its upsert_condition does not hold), AshPostgres.DataLayer reads the existing row back by the upsert identity in do_bulk_create/3 and upsert/4. That lookup did not apply the resource's attribute multitenancy, so on a resource using strategy :attribute it could match and return the row of another tenant with the same identity values, exposing its fields to the caller.
This issue affects ash_postgres: from 2.6.22 before 2.15.2. |
| Incorrect Authorization vulnerability in ash-project ash_postgres allows a user to load destination records linked to a source record only through another tenant's join rows.
When a many_to_many relationship, or a through relationship, is loaded with a lateral join (for example with a per-record limit or sort), AshPostgres.DataLayer builds the query for the join resource, and for each resource along a through path, in lateral_join_query/3 and through_step_queries/4 without running that resource's read action, which is where attribute multitenancy is applied. When those resources use strategy :attribute multitenancy, rows belonging to other tenants were joined, so the load returned destination records that the caller's tenant is not related to.
This issue affects ash_postgres: from 0.38.0 before 2.15.2. |
| Incorrect Authorization vulnerability in ash-project ash allows a client to read destination records unrelated to the source record through a through relationship.
When a has_many relationship declared with through: was loaded for a single record with a limit of 1, or an unsorted has_one through relationship was loaded with a limit of 1, lateral_join?/4 in lib/ash/actions/read/relationships.ex chose the path that reads the destination without any filter linking it to the source. The load returned the first destination record by sort, or any other record with an offset. The read still runs the destination's policies but carries the relationship as accessing_from, so a client paging such a field (for example teachers(limit: 1, offset: n) through AshGraphql) can enumerate destination records that policies allow only when reached through that relationship.
This issue affects ash: from 3.24.0 before 3.37.1. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Innotim Software, Telecommunications, and Consulting Co. Ltd. Logsign SIEM allows Path Traversal.
This issue affects Logsign SIEM: from 6.4.120 before 6.4.122. |
| A reflected Cross-Site Scripting (XSS) vulnerability has been identified in the web application of the Castile-La Mancha Regional Parliament’s video library. The application embeds user-supplied content into the page without properly sanitising it before it is rendered by the browser. Exploitation of this vulnerability could allow a remote attacker to execute arbitrary JavaScript code in the browser of a victim who interacts with the content crafted for the attack. |
| An issue in Maltego Technologies GmbH Maltego Windows Installer 4.13.0 allows a local attacker to execute arbitrary code via the Maltego Windows installer executable-resolution logic |
| Open5GS 1.3.0 through 2.8.0 contains a heap out-of-bounds write vulnerability in parse_multipart() that allows unauthenticated attackers to corrupt memory by supplying an empty multipart boundary. Attackers can send a single crafted multipart/related request to the SBI interface of any network function, overflowing the lookbehind buffer and crashing it. |
| boneIO Black does not limit authentication attempts on its web interface (POST /api/login) or SSH service, and does not enforce password complexity. An unauthenticated remote attacker can make unlimited brute-force login attempts, potentially compromising user accounts and gaining unauthorized access to the device.
This issue was fixed in version 1.6.0: web login attempts are rate-limited per source address and per account, panel passwords must be at least 8 characters long, and SSH allows three authentication attempts per connection with a shortened login grace time. |
| boneIO black_debian_images gives the boneio service account excessive privileges, including full passwordless sudo access and membership in the docker group. A local attacker who compromises the boneio user can use these privileges to escalate to root.
This issue was fixed in version 1.6.0: the image removes the sudoers rule and the docker group membership when it is sealed, and devices already in the field have both removed by migrations shipped with boneio 1.6.0 and applied on first start after the upgrade. Privileged operations now go through helpers that accept only a fixed set of commands, with migrations verified against Ed25519 signatures. |
| boneIO Black firmware ships with authentication disabled by default. Its management web API listens on all network interfaces and exposes all endpoints without requiring credentials. An unauthenticated remote attacker can fully control the device, causing denial of service, modifying configuration, and operating connected physical circuits.
This issue was fixed in version 1.6.0: a device without an administrator account refuses API requests until the owner creates one in the first-run wizard, and every API route is restricted to an authenticated role.
Versions before 1.2.0 are based on Debian 10, are no longer supported and cannot be upgraded in place; affected devices should be re-flashed with the 1.6.0 system image. |
| boneIO Black exposes a Node-RED instance without authentication at the /nodered/ path through a Caddy reverse proxy. The Node-RED Admin API allows deploying flows that can execute arbitrary system commands. An unauthenticated attacker on the local network can deploy a malicious flow to achieve remote code execution and gain full control over the home automation system.
This issue was fixed in version 1.6.0. |
| This issue affects Apache SIS from version 0.7 through 1.6 inclusive. When a data file contains links to other files, Apache SIS opened these files regardless their paths. It was possible, for example, to specify a path to a local file. However, these files were always expected to be in some specific formats and the reading stops at the first parsing error, which makes this vulnerability unlikely to leak sensitive information. The impacted formats are:
* Geographic Markup Language (GML) with `xlink:href` attributes for other files in GML format.
* Well Known Text (WKT) with parameter elements for datum shift grids in NADCON, NTv2 or RGF93 formats.
* Landsat scene with paths to files for each band in the GeoTIFF format.
Users are recommended to upgrade to version 1.7, which fixes the issue by restricting the paths to the same directory as the file containing the references to other files, or to a predetermined directory for datum shift grids. |
| In the Linux kernel, the following vulnerability has been resolved:
freevxfs: don't BUG() on unknown typed-extent type
vxfs_bmap_typed() handles four typed-extent types and calls BUG() in
its default case, so an on-disk typed extent with any other type value
crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular
file:
kernel BUG at fs/freevxfs/vxfs_bmap.c:230!
RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline]
vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257
Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value
vxfs_bmap_typed() already returns on failure (and from the DEV4 case
above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly. |
| A security vulnerability has been detected in Kameleo up to 5.3.1. This vulnerability affects unknown code of the file /general/user-info of the component Local API. Such manipulation leads to information disclosure. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: zero at allocation time
There are occasional LLM hints wrt. leaking uninitialized data to
userspace via ctnetlink. Just zero at allocation time,
expectations are not frequently used these days.
Intentionally keeps _init as-is because we could theoretically
support re-init, so add the missing exp->dir there. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend. |