| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Interoperability SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TLS to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all JD Edwards EnterpriseOne Tools accessible data as well as unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Tools accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when a core is removed
rocket_remove() decrements rdev->num_cores for each core it removes,
while find_core_for_dev() searches slots 0 to num_cores - 1. Unbinding
the cores in the order they were bound therefore loses the last one: by
the time it is removed the search range has already shrunk past its
slot, so find_core_for_dev() returns -1 and rocket_remove() gives up
without doing anything.
num_cores never reaches zero, rocket_device_fini() never runs, and the
file-scoped rdev keeps pointing at a device that is going away. Binding
the cores again starts from that stale count, because rocket_probe()
takes rdev->num_cores as the slot to fill. On an RK3588, which describes
three cores, the second round lands on slots 1, 2 and 3 while rdev->cores
was allocated with room for three:
rocket fdab0000.npu: Rockchip NPU core 1 version: 1179210309
rocket fdac0000.npu: Rockchip NPU core 2 version: 1179210309
rocket fdad0000.npu: Rockchip NPU core 3 version: 1179210309
The write to rdev->cores[3] is past the end of the array.
Nothing in tree reads the core array often enough to notice, so the
overrun is silent today. It turned up while testing a devfreq series on
top of this, where a worker walks every core a few times a second, and
UBSAN caught the first bool it read out of the overrun entry:
UBSAN: invalid-load in drivers/accel/rocket/rocket_devfreq.c:47:10
load of value 5 is not a valid value for type '_Bool'
Workqueue: devfreq_wq devfreq_monitor
Record how many slots were allocated and search all of them. Every core
is then found on removal, num_cores reaches zero, the device is torn down
and a later bind starts from a clean rdev.
This does not make unbinding a single core out of several work. probe
still takes num_cores as the slot to fill, so rebinding one core while
its siblings stay bound would write over a slot that is already in use,
and rocket_open() still reaches for cores[0] whether or not anything is
there. Both of those want more thought than a fix should carry.
Found by unbinding and rebinding all three cores on an Orange Pi 5 Plus.
With this applied, 25 unbind/rebind rounds and 5 module unload/reload
rounds run clean there: the cores land in slots 0, 1 and 2 every time,
whichever order they are bound in, and the shared supply goes back to a
single user after each round. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx()
Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made
for_each_insn_prefix() declare its own loop counter named idx.
get_seg_reg_override_idx() keeps its result in a local of the same name,
so the assignments in the loop body now write the loop counter:
- the function always returns INAT_SEG_REG_DEFAULT, so FS and GS
overrides are ignored;
- a CS override sets the counter to INAT_SEG_REG_CS (2), the increment
makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again,
so the loop never terminates.
The UMIP emulation reaches this from the #GP handler for user space: an
SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task
spinning in the kernel, never returning to user space, with a SIGKILL
that is never delivered. Any user can thus tie up CPUs until reboot.
With an FS or GS prefix, the emulated result is written to the wrong
address.
Rename the internal macro iterator variable.
[ Lukas' original patch renamed the use site, I changed it to rename the
iterator in the macro instead, but left Lukas' commit message and
authorship - Linus ] |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mxc: fix race between chained IRQ handler install and probe completion
mxc_update_irq_chained_handler() is called before the IRQ domain, the
generic IRQ chip, and the port list entry are set up. If an interrupt
arrives in that window:
- mx3_gpio_irq_handler() calls generic_handle_domain_irq() with
port->domain still NULL.
- mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not
been added to the list yet.
Additionally, if any of the subsequent probe steps
(gpio_generic_chip_init(), devm_gpiochip_add_data(),
irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error
paths never unregister the chained handler, leaving a dangling handler
that points at freed memory.
Move the handler installation after all its dependencies are ready and
after list_add_tail(), so the handler is never live while the data
structures it touches are incomplete, and is never installed if probe
fails. |
| When a message containing an OpenPGP key attachment was displayed, Thunderbird automatically loaded the attachment's content to offer importing the key. A sender could mark the attachment as an external attachment pointing to an arbitrary URL, which Thunderbird then loaded without any user interaction, bypassing remote content blocking. On Windows, a URL pointing to an attacker-controlled network share could leak the user's NTLM credentials.
The NTLM credential leak only affects Thunderbird on Windows. On other operating systems, the issue allowed a remote request that bypassed remote content blocking. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6. |
| When replying to, forwarding, or editing a crafted email message as new, Thunderbird could embed parts of a different message stored in the same folder into the message being composed, without showing a blocked content warning. If the user sent the message, the content of the other message was disclosed to the recipients. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6. |
| When looking for calendars in a directory on a server, during account setup or when adding a new network calendar, Thunderbird accepted calendar locations pointing to other servers, local files or network shares. A malicious server, or a network attacker when the lookup used plain HTTP, could make Thunderbird subscribe to such a location. On Windows this could leak the user's NTLM credentials to an attacker-controlled host on every calendar refresh, and changes to the calendar could be written to the attacker's share or overwrite a local file. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6. |
| When logging in to a Matrix account, Thunderbird used the homeserver address provided in the server's login response without validating it. A malicious or compromised homeserver could provide a file: URL, causing Thunderbird to send all further Matrix requests of that session to local files or, on Windows, to an attacker-controlled network share, which could leak the user's NTLM credentials.
The NTLM credential leak only affects Thunderbird on Windows. Other operating systems are unaffected. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethoc: move setting of netops to fix crash
ethoc_probe() calls ethoc_mdio_probe(), which connects the PHY,
before netdev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move setting of netops to fix crash
au1000_probe() calls au1000_mii_probe(), which connects the PHY,
before dev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mv643xx: move setting of netops to fix crash
mv643xx_eth_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap buffer overflow through an out-of-bounds write in the `Codec2` decoder caused by a `floor/ceil sample-count mismatch`. The `codec_codec2` module must be loaded and `Codec2` must be configured on the attacked endpoint. The attacker must pass SIP authentication by username/password or `source IP address matching`, establish a call using `Codec2`, and send carefully crafted `Codec2` audio packets. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an out-of-bounds write in `chan_unistim` `DIALPAGE` digit handling can overflow the `phone_number` field and crash Asterisk when an attacker sends a carefully crafted incoming request packet. The `chan_unistim` module must be loaded and configured with a valid `UNISTIM UDP port` that the attacker can reach. The attacker must register as a configured `phone MAC`, or the deployment must have an equivalent `production/autoprovisioning` path that allows the client to reach the main page. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the `Asterisk Manager Interface (AMI)` may allow an unauthenticated attacker to crash Asterisk when `Digest Authentication` is used via `HTTP`. The Asterisk `HTTP` web server, AMI, and AMI access via `HTTP` must all be enabled; each is disabled by default. The attacker must be able to connect to the `HTTP` server, which binds only to `127.0.0.1` by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded `memcpy` of `OGG/Speex` packet data in `format_ogg_speex` can cause a heap buffer overflow and crash Asterisk when reading a file containing corrupted Speex audio. The attacker must create the file and make it available to Asterisk either through sufficiently elevated privileges or by convincing an Asterisk administrator to make it available. Asterisk must also be configured to play that file. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. In affected deployments, an authenticated attacker may cause a `T.140 RED` heap buffer overflow using carefully crafted packets, potentially allowing remote code execution or causing Asterisk to crash. The `chan_sip` channel driver must be installed and configured, and its `textsupport` option must be enabled; `textsupport` defaults to no. `The chan_sip driver was deprecated in Asterisk 20 and completely removed in all later versions.` Repository comparisons verify patch containment in Asterisk 20.20.1, 21.12.3, 22.10.1 and 23.4.1, and Certified Asterisk 20.7-cert11 and 22.8-cert3. The affected release-track scope remains unresolved: structured metadata includes later release tracks even though the advisory says the required `chan_sip` driver was removed there. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, `app_sms.c` copies externally controlled `SMS` lengths into `fixed in-struct buffers` without sufficient bounds checks, allowing an attacker to corrupt memory or crash Asterisk. The administrator must explicitly use the `SMS` dialplan application, which is useful when routing calls to or from `analog devices`, and must not have ensured that data passed to the application is valid. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Vulnerability in the Oracle Agile PLM product of Oracle Supply Chain (component: Folders, Files & Attachments). The supported version that is affected is 9.3.6. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile PLM. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Agile PLM accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Porting). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 4.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:L). |
| Vyper 0.1.0b1 before 0.1.0b17 and 0.4.1 through 0.5.0b1 builds its source-line table with str.splitlines(), which treats characters like form feed and U+2028 as line breaks the Python parser ignores, so numeric literals are classified and validated from shifted source text. An attacker contributing source code can hide these characters in comments, strings or indentation to silently change address, integer or decimal constants. |