| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx11: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle. |
| authentik is an open-source identity provider. Prior to 2026.2.6 and 2026.5.5, the Remote Access Control endpoint list returns every configured endpoint to any authenticated user regardless of which applications the user may access, and the response includes connection settings that can contain stored credentials. The endpoint listing does not apply the access controls governing the endpoints, and the connection flow does not confirm that an endpoint belongs to the Remote Access Control application through which it was launched. Any authenticated user can therefore read every endpoint together with its host and stored credentials and can open a connection to an endpoint belonging to another application. This exposes stored credentials for managed RDP, SSH, and VNC targets and grants interactive access to systems the user was never authorized to reach. Deployments that do not use the enterprise Remote Access Control provider are not affected. This issue is fixed in versions 2026.2.6 and 2026.5.5. |
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.4, Vvveb backend post operations allow a low-privileged Author to access posts owned by another Author. The admin/controller/content/posts.php controller permits filter[admin_id] to replace the server-selected admin_id restriction and accepts a caller-controlled post_id for duplicate and delete actions, while admin/sql/sqlite/post.sql does not consistently enforce post.admin_id. An attacker can view post metadata, discover post identifiers, duplicate posts, or delete posts and related content, exposing private drafts and causing content pollution, data loss, or business disruption. This issue is fixed in version 1.0.8.4. |
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.4, Vvveb backend post revision operations allow a low-privileged Author to access revisions for posts owned by another Author. The admin/controller/content/revisions.php controller and admin/sql/sqlite/post_content_revision.sql queries trust caller-controlled post_id, language_id, and created_at values without consistently applying the current admin_id to revision lists, reads, restores, and deletes. An attacker can read historic post content, restore a revision over another Author's live post content, or delete revision records, exposing drafts, corrupting published content, and removing audit history. This issue is fixed in version 1.0.8.4. |
| A vulnerability was found in Webkul Bagisto up to 2.4.4. Affected by this issue is some unknown functionality of the file /admin/configuration/cache-management/execute of the component Configuration Management. The manipulation of the argument action results in authorization bypass. The attack may be launched remotely. The exploit has been made public and could be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| The User Verification by PickPlugins WordPress plugin through 2.0.47 does not verify that a request to resend a verification email is authorized to act on the supplied user, nor bind the protecting token to that user, allowing unauthenticated attackers to reset arbitrary users' email-verification status and lock them, including administrators, out of their accounts. |
| Vikunja through 2.4.0 contains a principal-type confusion vulnerability where LinkSharing principals with id N are treated as user principals with users.id == N at three permission checks lacking type guards. Attackers with a link-share JWT can remove victims from teams, enumerate and delete victim bot users, or read team rosters by exploiting id collisions in the autoincrement space. |
| The Eventin WordPress plugin before 4.1.21 does not properly verify ownership of events before allowing them to be modified, deleted, or reassigned to a different author, allowing users with contributor-level access and above to alter, delete, or take over events created by other users including administrators. |
| The WCFM Marketplace WordPress plugin before 3.8.1 does not verify that a marketplace vendor owns a review before allowing it to be unapproved or deleted, allowing any vendor to modify or permanently delete reviews belonging to other vendors' stores. |
| The Eventin WordPress plugin before 4.1.21 does not verify ownership before allowing schedule records to be modified or deleted, allowing users with contributor-level access and above to alter or delete schedule entries created by other users. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows a remote attacker to force visitors of a page to navigate to a site of the attacker's choosing via a <meta http-equiv="refresh"> element in sanitized HTML. HtmlSanitizeEx.html5/1 keeps attacker-supplied <meta> elements in its output. A meta element acts on the whole document rather than on the fragment it was embedded in, so it can also declare document-wide directives such as Content-Security-Policy.
This is not cross-site scripting. Browsers do not navigate a meta refresh to a javascript: URL, so the uppercase JAVASCRIPT: filter bypass yields no script execution and none was demonstrated.
This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows an unauthenticated remote attacker to retarget a form already on the rendering page and receive whatever the victim submits, including credentials, via the form and formaction attributes on an <input> element in sanitized HTML. HTML's form attribute associates an input with any form on the page by its id even when the input sits outside that form, and formaction on a submit control overrides the owning form's action. Neither attribute receives a scheme check, so an absolute cross-origin URL survives sanitizing.
No script executes. The scrubber allows neither form nor button, so the attacker cannot introduce a form of their own and the rendering page must already contain a form carrying an id.
This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3. |
| Privilege escalation in the Downloads API component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| Mitigation bypass in the JavaScript: GC component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, Zebra can accept a block that zcashd rejects because the P2SH signature-operation counter undercounts redeem scripts containing a disabled opcode followed by signature opcodes. In zebra-script/src/lib.rs, p2sh_input_sigop_count used the pure-Rust script::Code::sig_op_count path, whose try_fold parser stops at disabled opcodes such as OP_CODESEPARATOR and returns only the partial count accumulated before the error. The zcashd reference implementation continues static signature-operation counting through disabled opcodes, so an attacker can broadcast P2SH spends that Zebra counts below MAX_BLOCK_SIGOPS while zcashd counts above the 20,000-operation limit. If a Zebra miner includes those transactions, Zebra validators accept the block while zcashd validators reject it, creating a consensus chain split that affects network integrity and availability without requiring the attacker to produce a block. This issue is fixed in version 4.5.0. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, an unauthenticated IPv4 peer can deterministically terminate a synced Zebra node using the default Linux dual-stack listener configuration. The handshake path canonicalized an IPv4-mapped IPv6 PeerSocketAddr such as ::ffff:127.0.0.1 to plain IPv4 before storing it through MetaAddr::new_connected, but the mempool misbehavior path forwarded the raw transient address to MetaAddrChange::UpdateMisbehavior. In zebra-network/src/meta_addr.rs, apply_to_meta_addr then compared the canonical address-book entry with the raw update address and reached its unexpected address mismatch assertion. After the misbehavior batch flush, panic equals abort terminated zebrad; the peer only needed to complete a P2P handshake and advertise an invalid mempool transaction. This issue is fixed in version 4.5.0. |
| Lemur manages TLS certificate creation. Prior to 1.9.3, POST /api/1/certificates/upload allowed a non-read-only user to create a duplicate row using another certificate body, authority_id, serial, or external_id without requiring permission on the underlying authority. PUT /api/1/certificates//revoke authorized the caller against only the selected Lemur row, so the creator of the duplicate bypassed CertificatePermission. The duplicate had no cert.endpoints, which also bypassed the safeguard that prevents revocation of deployed certificates. Issuer plugins then revoked the real CA-side certificate using certificate.body or external_id under the stored authority credentials. An attacker could therefore revoke arbitrary managed certificates and cause fleet-wide TLS denial of service. The fix rejects duplicate authority_id and serial identities, requires authority access on upload, and checks every matching row during revocation. This issue is fixed in version 1.9.3. |
