| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An integer overflow in the mtar_next function in src/microtar.c in rxi microtar 0.1.0 allows a remote attacker to cause a denial of service (uncontrolled CPU consumption / infinite loop) via a crafted tar archive. mtar_next computes the offset to the next record as round_up(h.size, 512) + sizeof(mtar_raw_header_t) using 32-bit arithmetic. |
| Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. From version 10.6.0 until 10.9.8 and 11.16.1, Mermaid XY Charts are vulnerable to an infinite loop denial of service in the setXAxisRangeData function when configuring an X-Axis with invalid parameters. Because each loop iteration appends an element to an array, this generally causes a RangeError to appear after a few seconds, but it may instead cause the page or JavaScript process to crash from memory exhaustion, depending on the environment. This issue is fixed in versions 10.9.8 and 11.16.1. |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::AtomicReference#update can enter a permanent busy retry loop when the current value is Float::NAN. The issue is caused by the interaction between AtomicReference#update, which retries until compare_and_set(old_value, new_value) succeeds; Numeric compare_and_set, which checks old == old_value before attempting the underlying atomic swap.; and Ruby NaN semantics, where Float::NAN == Float::NAN is always false. As a result, once an AtomicReference contains Float::NAN, calling #update repeatedly evaluates the caller's block and never returns. In services that store externally derived numeric values in an AtomicReference, this can cause CPU exhaustion or permanent request/job hangs. This vulnerability is fixed in 1.3.7. |
| When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
fsdax: dax_unshare_iter needs to copy entire blocks
The code that copies data from srcmap to iomap in dax_unshare_iter is
very very broken, which bfoster's recent fsx changes have exposed.
If the pos and len passed to dax_file_unshare are not aligned to an
fsblock boundary, the iter pos and length in the _iter function will
reflect this unalignment.
dax_iomap_direct_access always returns a pointer to the start of the
kmapped fsdax page, even if its pos argument is in the middle of that
page. This is catastrophic for data integrity when iter->pos is not
aligned to a page, because daddr/saddr do not point to the same byte in
the file as iter->pos. Hence we corrupt user data by copying it to the
wrong place.
If iter->pos + iomap_length() in the _iter function not aligned to a
page, then we fail to copy a full block, and only partially populate the
destination block. This is catastrophic for data confidentiality
because we expose stale pmem contents.
Fix both of these issues by aligning copy_pos/copy_len to a page
boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that
we always copy full blocks.
We're not done yet -- there's no call to invalidate_inode_pages2_range,
so programs that have the file range mmap'd will continue accessing the
old memory mapping after the file metadata updates have completed.
Be careful with the return value -- if the unshare succeeds, we still
need to return the number of bytes that the iomap iter thinks we're
operating on. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
The in_token->pages[] array is not NULL terminated. This results in
the following KASAN splat:
KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix ib block iterator counter overflow
When registering a new DMA MR after selecting the best aligned page size
for it, we iterate over the given sglist to split each entry to smaller,
aligned to the selected page size, DMA blocks.
In given circumstances where the sg entry and page size fit certain
sizes and the sg entry is not aligned to the selected page size, the
total size of the aligned pages we need to cover the sg entry is >= 4GB.
Under this circumstances, while iterating page aligned blocks, the
counter responsible for counting how much we advanced from the start of
the sg entry is overflowed because its type is u32 and we pass 4GB in
size. This can lead to an infinite loop inside the iterator function
because the overflow prevents the counter to be larger
than the size of the sg entry.
Fix the presented problem by changing the advancement condition to
eliminate overflow.
Backtrace:
[ 192.374329] efa_reg_user_mr_dmabuf
[ 192.376783] efa_register_mr
[ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000
[ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000]
[ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3
[ 192.399559] hp_cnt[3], pages_in_hp[524288]
[ 192.403690] umem->sgt_append.sgt.nents[1]
[ 192.407905] number entries: [1], pg_bit: [31]
[ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472]
[ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472]
[ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472] |
| A norm.Iter can enter an infinite loop when handling input containing invalid UTF-8 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Break the loop on failure in iommufd_fault_fops_read()
On a copy_to_user() failure inside the inner list_for_each_entry, only the
inner loop breaks; the outer while re-fetches the just-restored fault group
and retries the failing copy_to_user() forever, spinning the reader at 100%
CPU with fault->mutex held.
Check rc after the inner loop and break the outer while as well. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work()
Every once in a while we see a hung btmtksdio_flush() task:
INFO: task kworker/u17:0:189 blocked for more than 122 seconds.
__cancel_work_timer+0x3f4/0x460
cancel_work_sync+0x1c/0x2c
btmtksdio_flush+0x2c/0x40
hci_dev_open_sync+0x10c4/0x2190
[..]
It all boils down to incorrect time_is_before_jiffies() usage in
btmtksdio_txrx_work(). The btmtksdio_txrx_work() loop is expected
to be terminated if running for longer than 5*HZ. However the
timeout check is twisted: time_is_before_jiffies(old_jiffies + 5*HZ)
evaluates to true when old_jiffies + 5*HZ is in the past i.e. when a
timeout has occurred. Using OR with time_is_before_jiffies(txrx_timeout)
means that:
- before the 5-second timeout: the condition is `int_status || false`,
so it loops as long as there are pending interrupts.
- after the 5-second timeout: the condition becomes `int_status || true`,
which is always true.
When the loop becomes infinite btmtksdio_txrx_work() loop never
terminates and never releases the SDIO host.
Fix loop termination condition to actually enforce a 5*HZ timeout. |
| re2 provides Node.js bindings for Google's RE2 regular expression engine. Prior to 1.25.2, re2's String.prototype.match implementation with a global RE2 pattern that can match the empty string fails to advance its native matching cursor in lib/match.cc, causing an infinite loop and unbounded native memory growth that blocks the event loop and can exhaust host memory. This issue is fixed in 1.25.2. |
| In Roundcube Webmail before 1.6.17 and 1.7.x before 1.7.2, an infinite loop was discovered in the TNEF decoder, which may lead to denial of service upon opening an email with a TNEF attachment. |
| In the Linux kernel, the following vulnerability has been resolved:
s390: Revert support for DCACHE_WORD_ACCESS
load_unaligned_zeropad() reads eight bytes from unaligned addresses and may
cross page boundaries. It handles exceptions which may happen if reading
from the second page results in an exception.
For pages which are donated to the Ultravisor for secure execution purposes
the do_secure_storage_access() exception handler however does not handle
such exceptions correctly. Such an exception may result in an endless
exception loop which will never be resolved.
An attempt to fix this [1] turned out to be not sufficient. For now revert
load_unaligned_zeropad() until this problem has been resolved in a proper
way.
Note that the implementation of load_unaligned_zeropad() itself is
correct. The revert is just a temporary workaround until there is complete
fix for secure storage access exceptions.
[1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") |
| facil.io 0.6.0 through 0.7.6 contains a denial-of-service vulnerability in the multipart body parser that allows an unauthenticated remote attacker to permanently freeze worker processes at 100% CPU by sending a multipart/form-data request with a partial closing boundary. The missing progress guard in the parser loop causes http_mime_parse to return 0 bytes consumed without setting done or error flags, causing the calling loop to re-invoke the parser on the same buffer indefinitely, exhausting all workers and permanently disabling the server until manually restarted. |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: Fix crash when a namespace is disabled
The namespace percpu counter protects pending I/O, and we can
only safely diable the namespace once the counter drop to zero.
Otherwise we end up with a crash when running blktests/nvme/058
(eg for loop transport):
[ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
[ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232
[ 2352.930438] [ T53909] Tainted: [W]=WARN
[ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
[ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180
as the queue is already torn down when calling submit_bio();
So we need to init the percpu counter in nvmet_ns_enable(), and
wait for it to drop to zero in nvmet_ns_disable() to avoid having
I/O pending after the namespace has been disabled. |
| Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.136.Final and 4.2.16.Final, the `Bzip2Decoder` handler in Netty's compression codec pipeline is vulnerable to a denial-of-service attack through a malformed bzip2 stream that permanently captures the event-loop thread in an infinite loop. The vulnerability exists in the run-length encoding (RLE) state machine within [`Bzip2BlockDecompressor.read()`]. This issue has been fixed in versions 4.1.136.Final and 4.2.16.Final. |
