Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-106003 2026-10-28 5.3 Medium
The Court Reservation WordPress plugin before 1.12.4 does not perform any authorization, authentication or nonce validation on one of its AJAX actions, allowing unauthenticated users to add or delete reservation types in the Court Reservation WordPress plugin before 1.12.4's configuration.
CVE-2026-107098 2026-10-28 6.8 Medium
The Royal Addons for Elementor WordPress plugin before 1.7.1070 does not sanitise and escape one of its map widget's size settings before concatenating it into an HTML attribute, allowing users with the Contributor role or above to inject JavaScript that runs in the browser of any user who views the page, including an administrator reviewing a pending submission.
CVE-2026-117626 2 Jenkins, Jenkins Project 2 Jenkins, Jenkins 2026-10-28 N/A
Jenkins 2.587 and earlier, LTS 2.580.1 and earlier improperly identifies file paths attempting path traversal in the file browser for workspaces and $JENKINS_HOME/userContent/, allowing attackers with Overall/Read permission to obtain the names, sizes, and last modification times of files in the $JENKINS_HOME, and attackers with Item/Workspace permission to obtain the names of jobs that have a workspace on the same agent.
CVE-2026-82961 1 Zephyrproject 1 Zephyr 2026-10-28 7.8 High
The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all. GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it. The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash. The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines.
CVE-2026-82962 1 Zephyrproject 1 Zephyr 2026-10-28 6.5 Medium
ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet's interface is the Ethernet interface. A packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards. Because net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes — 18 with VLAN — of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer's payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt->buffer) is large enough and otherwise falls back to a separate header fragment.
CVE-2026-114662 1 Obot-platform 1 Obot 2026-10-28 8.1 High
Obot before 0.26.0 contains an authentication bypass vulnerability in the CLI login flow that allows unauthenticated attackers to steal API keys by choosing token request IDs. Attackers can create a token request via POST /api/token-request, send the login link to a signed-in user, and fetch the resulting non-expiring API key to take over the victim's account.
CVE-2026-114658 1 Getgrav 1 Grav-plugin-login 2026-10-28 8.8 High
Grav Login plugin from 3.6.0 before 3.9.13 contains a missing authorization vulnerability in the login.invite task that allows page authors to obtain super user accounts. Attackers can define an invitation form granting super access in page frontmatter, submit it unauthenticated, and register the invited address for full site control.
CVE-2026-114641 1 Traefik 1 Traefik 2026-10-28 3.7 Low
Traefik 2.11.x before 2.11.58 and 3.x before 3.7.14 contains a race condition in NTLM and Kerberos (Negotiate) backend authentication, where the per-connection sticky round tripper slot is read and written without synchronization. Remote attackers can send concurrent HTTP/2 or HTTP/3 requests over one connection to orphan backend connections, break connection-bound authentication, or crash Traefik.
CVE-2026-114575 1 Totolink 2 A950rg, A950rg Firmware 2026-10-28 10 Critical
A flaw has been found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. Affected by this issue is the function UploadCustomModule of the file lib/cste_modules/product.so. Executing a manipulation of the argument FileMd5 can lead to command injection. The attack can be launched remotely. The exploit has been published and may be used.
CVE-2020-37284 1 Midgetspy 1 Sickbeard 2026-10-28 6.1 Medium
Sickbeard through build-507 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject scripts through the pattern parameter of /config/postProcessing/testNaming. Attackers can craft GET requests with malicious SVG onload payloads that the testNaming handler returns unescaped, executing JavaScript in victims' browsers. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-22.
CVE-2026-117617 2 Jenkins, Jenkins Project 2 Jenkins, Jenkins 2026-10-28 N/A
Jenkins 2.587 and earlier, LTS 2.580.1 and earlier checks for symbolic links in the path of an extracted file only before creating its parent directories, not immediately before writing it, and allows symbolic links in artifacts to replace existing files or empty directories, allowing attackers with Item/Configure permission to write files to arbitrary locations on the Jenkins controller file system.
CVE-2026-117618 2 Jenkins, Jenkins Project 2 Jenkins, Jenkins 2026-10-28 N/A
In Jenkins 2.587 and earlier, LTS 2.580.1 and earlier, the HTTP endpoint for creating the first user account does not check whether the setup wizard has been completed, resulting in a race condition that allows unauthenticated attackers to create an administrator account while the initial user account is being replaced.
CVE-2026-84725 1 Redhat 1 Jboss Enterprise Application Platform 2026-10-28 8.1 High
when EAP runs with -secmgr, the openjdk-orb's JDKBridge honours attacker-supplied CDR codebase URLs during object unmarshalling on :3528, allowing an unauthenticated attacker to load and instantiate arbitrary classes from a remote URL in the server JVM before EJB security interceptors run.
CVE-2026-105615 1 Dalibo 1 Postgresql Anonymizer 2026-10-28 3.5 Low
PostgreSQL's optimized statistics on a table are visible as long as you have SELECT privilege on said table. A masked role can therefore read a limited subset of the data through the statistics view's histograms and mcvs. The vulnerability is resolved in PostgreSQL Anonymizer 3.3.0 and later versions.
CVE-2026-105616 1 Dalibo 1 Postgresql Anonymizer 2026-10-28 5.7 Medium
PostgreSQL restricts acces to the salt and shift via the `SHOW` command for users not member of `pg_read_all_settings`. But they are visible in `pg_db_role_setting` or `pg_roles` if they were set on the database, user or both. PostgreSQL Anonymizer's documentation recommends to use ALTER DATABASE / ALTER ROLE for the salt. The problem is resolved in PostgreSQL Anonymizer 3.3.0 and later versions.
CVE-2026-118250 1 Highcharts 1 Highcharts 2026-10-28 N/A
Highcharts JS is a JavaScript charting library based on SVG. From 6.1.0 until 11.4.9, 12.6.1, and 3.1.0, Highcharts follows dot-separated series.keys paths without filtering each segment. An attacker who controls series.keys and matching point data can use a path through __proto__ to assign arbitrary named properties to Object.prototype. Those properties are visible to all JavaScript in the page, and no user interaction is required beyond rendering the chart. This issue is fixed in 11.4.9, 12.6.1, and 3.1.0.
CVE-2026-112344 2026-10-28 6.8 Medium
Syncplify Server! 6.0.0 before 8.8.0 contains a path traversal vulnerability that allows attackers with a symbolic link placed inside a user's home folder to access files outside the virtual filesystem root because confinement is enforced only against the requested path and not the on-disk destination of the link. Attackers can leverage a symlink or, on Windows, a directory junction that points outside the jail to read or access restricted files beyond the intended home-folder boundary.
CVE-2026-118345 1 Google 1 Chrome 2026-10-28 8.8 High
Use after free in PDFium in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)
CVE-2026-113943 1 Apple 1 Macos 2026-10-28 6.5 Medium
An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory.
CVE-2026-117613 2 Jenkins, Jenkins Project 2 Jenkins, Jenkins 2026-10-28 N/A
Jenkins 2.587 and earlier, LTS 2.580.1 and earlier does not restrict item types in collections after deserialization, allowing attackers with access to POST config.xml API endpoints to submit crafted `config.xml` files that can lead to, e.g., stored cross-site scripting (XSS) vulnerabilities.