| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-dw-dma: fix print error log when wait finish transaction
If an error occurs, the device may not have a current message. In this
case, the system will crash.
In this case, it's better to use dev from the struct ctlr (struct spi_controller*). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048 |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| In the Linux kernel, the following vulnerability has been resolved:
team: fix header_ops type confusion with non-Ethernet ports
Similar to commit 950803f72547 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.
For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.
The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.
Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.
Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent immediate PASID reuse case
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix use-after-free in bond_xmit_broadcast()
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Recover HW before retire hung submit
During recovery, it is not safe to retire the hung submit before we
recover the GPU. Retiring the submit triggers BO free and that can
result in GPU pagefaults since the GPU may be actively accessing those
BOs.
To fix this, retire the submits after gpu recovery is complete in
recover_worker().
Patchwork: https://patchwork.freedesktop.org/patch/730655/ |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never
transferred and neither object is freed:
- issue_beacon(): beacon larger than 512 bytes
- issue_probersp(): cur_network->ie_length > MAX_IE_SZ
- issue_probersp(): kzalloc() of the SSID scratch buffer fails
- issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP
Because alloc_mgtxmitframe() removes the frame and buf from their free
lists (list_del_init) without placing them on any pending list, an
orphaned pair is on no list and referenced by nobody, so it is only
reclaimed at driver teardown. Repeated hits progressively exhaust the
management-TX pools until alloc_mgtxmitframe() returns NULL and the
interface can no longer send beacons or probe/assoc responses.
Free the frame and buffer on these paths, matching the existing correct
error handling in issue_assocreq(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Add missing NULL check for alloc_workqueue()
alloc_workqueue() can return NULL on memory allocation failure. Without
proper error checking, this may lead to a NULL pointer dereference when
queue_work() is later called with the NULL workqueue pointer in
epf_ntb_epc_init().
Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on
failure to prevent the driver from loading with an invalid workqueue
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
MHI stack offers the 'auto_queue' feature, which allows the MHI stack to
auto queue the buffers for the RX path (DL channel). Though this feature
simplifies the client driver design, it introduces race between the client
drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'
for the DL channel may get called before the client driver is fully probed.
This means, by the time the dl_callback gets called, the client driver's
structures might not be initialized, leading to NULL ptr dereference.
Currently, the drivers have to workaround this issue by initializing the
internal structures before calling mhi_prepare_for_transfer_autoqueue().
But even so, there is a chance that the client driver's internal code path
may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is
called, leading to similar NULL ptr dereference. This issue has been
reported on the Qcom X1E80100 CRD machines affecting boot.
So to properly fix all these races, drop the MHI 'auto_queue' feature
altogether and let the client driver (QRTR) manage the RX buffers manually.
In the QRTR driver, queue the RX buffers based on the ring length during
probe and recycle the buffers in 'dl_callback' once they are consumed. This
also warrants removing the setting of 'auto_queue' flag from controller
drivers.
Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.
So only the QRTR client driver requires the modification. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a8671 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| When libcurl uses libssh2 with a hashed `known_hosts` file, an unrelated
initial entry can cause host key validation to report a key *mismatch* as a
*missing* key to the `CURLOPT_SSH_KEYFUNCTION` callback. |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in
the `IMAP APPEND {N}` literal while transmitting line-ending expanded data.
The server reads only $N$ bytes for the payload, causing the remaining
overflow bytes to be interpreted and executed as pipelined IMAP commands
within the authenticated session. |
| An authenticated HTTPS origin can supply an HSTS `max-age` value that the
parser accepts, but time serialization later fails to process. On 64-bit
systems, extreme max-age values compute an absolute expiry within standard
time integer limits that exceeds calendar time structure bounds. During cache
saves, the original HSTS file is truncated before writing a temporary
replacement; when serialization fails, the temporary file is deleted, leaving
an empty or partial cache. Because the save error is silently ignored during
cleanup, curl exits successfully despite the data loss. |
