| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-tpg: prevent the risk of a division by zero
As reported by Coverity, the logic at tpg_precalculate_line()
blindly rescales the buffer even when scaled_witdh is equal to
zero. If this ever happens, this will cause a division by zero.
Instead, add a WARN_ON_ONCE() to trigger such cases and return
without doing any precalculation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlegacy: Clear stale interrupts before resuming device
iwl4965 fails upon resume from hibernation on my laptop. The reason
seems to be a stale interrupt which isn't being cleared out before
interrupts are enabled. We end up with a race beween the resume
trying to bring things back up, and the restart work (queued form
the interrupt handler) trying to bring things down. Eventually
the whole thing blows up.
Fix the problem by clearing out any stale interrupts before
interrupts get enabled during resume.
Here's a debug log of the indicent:
[ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[ 12.052207] ieee80211 phy0: il4965_mac_start enter
[ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready
[ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[ 12.058869] ieee80211 phy0: Hardware restart was requested
[ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[ 16.132303] ------------[ cut here ]------------
[ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[ 16.132463] Workqueue: async async_run_entry_fn
[ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[ 16.132501] Code: da 02 00 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
In the ad9832_write_frequency() function, clk_get_rate() might return 0.
This can lead to a division by zero when calling ad9832_calc_freqreg().
The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect
against the case when fout is 0. The ad9832_write_frequency() function
is called from ad9832_write(), and fout is derived from a text buffer,
which can contain any value. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
The step variable is initialized to zero. It is changed in the loop,
but if it's not changed it will remain zero. Add a variable check
before the division.
The observed behavior was introduced by commit 826b5de90c0b
("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"),
and it is difficult to show that any of the interval parameters will
satisfy the snd_interval_test() condition with data from the
amdtp_rate_table[] table.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v4: Don't allow a VMOVP on a dying VPE
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
Deleting an NPIV instance requires all fabric ndlps to be released before
an NPIV's resources can be torn down. Failure to release fabric ndlps
beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID
to complete synchronously with usage of wait_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix race when converting group handle to group object
XArray provides it's own internal lock which protects the internal array
when entries are being simultaneously added and removed. However there
is still a race between retrieving the pointer from the XArray and
incrementing the reference count.
To avoid this race simply hold the internal XArray lock when
incrementing the reference count, this ensures there cannot be a racing
call to xa_erase(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mremap: fix move_normal_pmd/retract_page_tables race
In mremap(), move_page_tables() looks at the type of the PMD entry and the
specified address range to figure out by which method the next chunk of
page table entries should be moved.
At that point, the mmap_lock is held in write mode, but no rmap locks are
held yet. For PMD entries that point to page tables and are fully covered
by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called,
which first takes rmap locks, then does move_normal_pmd().
move_normal_pmd() takes the necessary page table locks at source and
destination, then moves an entire page table from the source to the
destination.
The problem is: The rmap locks, which protect against concurrent page
table removal by retract_page_tables() in the THP code, are only taken
after the PMD entry has been read and it has been decided how to move it.
So we can race as follows (with two processes that have mappings of the
same tmpfs file that is stored on a tmpfs mount with huge=advise); note
that process A accesses page tables through the MM while process B does it
through the file rmap:
process A process B
========= =========
mremap
mremap_to
move_vma
move_page_tables
get_old_pmd
alloc_new_pmd
*** PREEMPT ***
madvise(MADV_COLLAPSE)
do_madvise
madvise_walk_vmas
madvise_vma_behavior
madvise_collapse
hpage_collapse_scan_file
collapse_file
retract_page_tables
i_mmap_lock_read(mapping)
pmdp_collapse_flush
i_mmap_unlock_read(mapping)
move_pgt_entry(NORMAL_PMD, ...)
take_rmap_locks
move_normal_pmd
drop_rmap_locks
When this happens, move_normal_pmd() can end up creating bogus PMD entries
in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect
depends on arch-specific and machine-specific details; on x86, you can end
up with physical page 0 mapped as a page table, which is likely
exploitable for user->kernel privilege escalation.
Fix the race by letting process B recheck that the PMD still points to a
page table after the rmap locks have been taken. Otherwise, we bail and
let the caller fall back to the PTE-level copying path, which will then
bail immediately at the pmd_none() check.
Bug reachability: Reaching this bug requires that you can create
shmem/file THP mappings - anonymous THP uses different code that doesn't
zap stuff under rmap locks. File THP is gated on an experimental config
flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need
shmem THP to hit this bug. As far as I know, getting shmem THP normally
requires that you can mount your own tmpfs with the right mount flags,
which would require creating your own user+mount namespace; though I don't
know if some distros maybe enable shmem THP by default or something like
that.
Bug impact: This issue can likely be used for user->kernel privilege
escalation when it is reachable. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: don't WARN for racy path_noexec check
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier")
0fd338b2d2cd ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug value.
However, the spurious path_noexec check is racy, resulting in
unwarranted warnings should someone race with setting the noexec flag.
One can note there is more to perm-checking whether execve is allowed
and none of the conditions are guaranteed to still hold after they were
tested for.
Additionally this does not validate whether the code path did any perm
checking to begin with -- it will pass if the inode happens to be
regular.
Keep the redundant path_noexec() check even though it's mindless
nonsense checking for guarantee that isn't given so drop the WARN.
Reword the commentary and do small tidy ups while here.
[brauner: keep redundant path_noexec() check] |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: fix use after free bug in venus_remove due to race condition
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_error_handler
venus_remove |
hfi_destroy |
venus_hfi_destroy |
kfree(hdev); |
|hfi_reinit
|venus_hfi_queues_reinit
|//use hdev
Fix it by canceling the work in venus_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix memfd_pin_folios alloc race panic
If memfd_pin_folios tries to create a hugetlb page, but someone else
already did, then folio gets the value -EEXIST here:
folio = memfd_alloc_folio(memfd, start_idx);
if (IS_ERR(folio)) {
ret = PTR_ERR(folio);
if (ret != -EEXIST)
goto err;
then on the next trip through the "while start_idx" loop we panic here:
if (folio) {
folio_put(folio);
To fix, set the folio to NULL on error. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Fix a race during cpuhp processing
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix a race between socket set up and I/O thread creation
In rxrpc_open_socket(), it sets up the socket and then sets up the I/O
thread that will handle it. This is a problem, however, as there's a gap
between the two phases in which a packet may come into rxrpc_encap_rcv()
from the UDP packet but we oops when trying to wake the not-yet created I/O
thread.
As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's
no I/O thread yet.
A better, but more intrusive fix would perhaps be to rearrange things such
that the socket creation is done by the I/O thread. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race setting file private on concurrent lseek using same fd
When doing concurrent lseek(2) system calls against the same file
descriptor, using multiple threads belonging to the same process, we have
a short time window where a race happens and can result in a memory leak.
The race happens like this:
1) A program opens a file descriptor for a file and then spawns two
threads (with the pthreads library for example), lets call them
task A and task B;
2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at
file.c:find_desired_extent() while holding a read lock on the inode;
3) At the start of find_desired_extent(), it extracts the file's
private_data pointer into a local variable named 'private', which has
a value of NULL;
4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode
in shared mode and enters file.c:find_desired_extent(), where it also
extracts file->private_data into its local variable 'private', which
has a NULL value;
5) Because it saw a NULL file private, task A allocates a private
structure and assigns to the file structure;
6) Task B also saw a NULL file private so it also allocates its own file
private and then assigns it to the same file structure, since both
tasks are using the same file descriptor.
At this point we leak the private structure allocated by task A.
Besides the memory leak, there's also the detail that both tasks end up
using the same cached state record in the private structure (struct
btrfs_file_private::llseek_cached_state), which can result in a
use-after-free problem since one task can free it while the other is
still using it (only one task took a reference count on it). Also, sharing
the cached state is not a good idea since it could result in incorrect
results in the future - right now it should not be a problem because it
end ups being used only in extent-io-tree.c:count_range_bits() where we do
range validation before using the cached state.
Fix this by protecting the private assignment and check of a file while
holding the inode's spinlock and keep track of the task that allocated
the private, so that it's used only by that task in order to prevent
user-after-free issues with the cached state record as well as potentially
using it incorrectly in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: use work queue to process beacon tx event
Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template")
from Feb 28, 2024 (linux-next), leads to the following Smatch static
checker warning:
drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie()
warn: sleeping in atomic context
The reason is that ath11k_bcn_tx_status_event() will directly call might
sleep function ath11k_wmi_cmd_send() during RCU read-side critical
sections. The call trace is like:
ath11k_bcn_tx_status_event()
-> rcu_read_lock()
-> ath11k_mac_bcn_tx_event()
-> ath11k_mac_setup_bcn_tmpl()
……
-> ath11k_wmi_bcn_tmpl()
-> ath11k_wmi_cmd_send()
-> rcu_read_unlock()
Commit 886433a98425 ("ath11k: add support for BSS color change") added the
ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning
of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock
to avoid warning but also introduced this BUG.
Use work queue to avoid directly calling ath11k_mac_bcn_tx_event()
during RCU critical sections. No need to worry about the deletion of vif
because cancel_work_sync() will drop the work if it doesn't start or
block vif deletion until the running work is done.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: check stripe size compatibility on remount as well
We disable stripe size in __ext4_fill_super if it is not a multiple of
the cluster ratio however this check is missed when trying to remount.
This can leave us with cases where stripe < cluster_ratio after
remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some
unforeseen bugs like divide by 0.
Fix that by adding the check in remount path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: get rid of online repaire on corrupted directory
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs. |
