| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Alpine before 2.25 allows remote attackers to cause a denial of service (application crash) when LIST or LSUB is sent before STARTTLS. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: flush quota_release_work upon quota writeback
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in SMB request handling
A race condition exists between SMB request handling in
`ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the
workqueue handler `handle_ksmbd_work()`. This leads to a UAF.
- KASAN: slab-use-after-free Read in handle_ksmbd_work
- KASAN: slab-use-after-free in rtlock_slowlock_locked
This race condition arises as follows:
- `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero:
`wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);`
- Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using
`atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls
`ksmbd_conn_free()`, which frees `conn`.
- However, after `handle_ksmbd_work()` decrements `conn->r_count`,
it may still access `conn->r_count_q` in the following line:
`waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)`
This results in a UAF, as `conn` has already been freed.
The discovery of this UAF can be referenced in the following PR for
syzkaller's support for SMB requests. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: error out earlier on disconnect
Eric reported a division by zero splat in the MPTCP protocol:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted
6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163
Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8
0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c
24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89
RSP: 0018:ffffc900041f7930 EFLAGS: 00010293
RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b
RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004
RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67
R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80
R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000
FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493
mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline]
mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289
inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x1b2/0x250 net/socket.c:1073
__sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265
__do_sys_recvfrom net/socket.c:2283 [inline]
__se_sys_recvfrom net/socket.c:2279 [inline]
__x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7feb5d857559
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559
RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000
R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c
R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef
and provided a nice reproducer.
The root cause is the current bad handling of racing disconnect.
After the blamed commit below, sk_wait_data() can return (with
error) with the underlying socket disconnected and a zero rcv_mss.
Catch the error and return without performing any additional
operations on the current socket. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b31f
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up). |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Fix zero-division error when disabling tc cbs
The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider
when offload is disabled") allows the "port_transmit_rate_kbps" to be
set to a value of 0, which is then passed to the "div_s64" function when
tc-cbs is disabled. This leads to a zero-division error.
When tc-cbs is disabled, the idleslope, sendslope, and credit values the
credit values are not required to be configured. Therefore, adding a return
statement after setting the txQ mode to DCB when tc-cbs is disabled would
prevent a zero-division error. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0
Workqueue: events destroy_super_work
RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
Call Trace:
percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42
destroy_super_work+0xec/0x130 fs/super.c:282
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
As Christian Brauner pointed out [1]: the root cause is f2fs sets
SB_RDONLY flag in internal function, rather than setting the flag
covered w/ sb->s_umount semaphore via remount procedure, then below
race condition causes this bug:
- freeze_super()
- sb_wait_write(sb, SB_FREEZE_WRITE)
- sb_wait_write(sb, SB_FREEZE_PAGEFAULT)
- sb_wait_write(sb, SB_FREEZE_FS)
- f2fs_handle_critical_error
- sb->s_flags |= SB_RDONLY
- thaw_super
- thaw_super_locked
- sb_rdonly() is true, so it skips
sb_freeze_unlock(sb, SB_FREEZE_FS)
- deactivate_locked_super
Since f2fs has almost the same logic as ext4 [2] when handling critical
error in filesystem if it mounts w/ errors=remount-ro option:
- set CP_ERROR_FLAG flag which indicates filesystem is stopped
- record errors to superblock
- set SB_RDONLY falg
Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the
flag and stop any further updates on filesystem. So, it is safe to not
set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3].
[1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner
[2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3
[3] https://lore.kernel.org/linux-ext4/20240805201241.27286-1-jack@suse.cz |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: change ipsec_lock from spin lock to mutex
In the cited commit, bond->ipsec_lock is added to protect ipsec_list,
hence xdo_dev_state_add and xdo_dev_state_delete are called inside
this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep,
"scheduling while atomic" will be triggered when changing bond's
active slave.
[ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200
[ 101.055726] Modules linked in:
[ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1
[ 101.058760] Hardware name:
[ 101.059434] Call Trace:
[ 101.059436] <TASK>
[ 101.060873] dump_stack_lvl+0x51/0x60
[ 101.061275] __schedule_bug+0x4e/0x60
[ 101.061682] __schedule+0x612/0x7c0
[ 101.062078] ? __mod_timer+0x25c/0x370
[ 101.062486] schedule+0x25/0xd0
[ 101.062845] schedule_timeout+0x77/0xf0
[ 101.063265] ? asm_common_interrupt+0x22/0x40
[ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10
[ 101.064215] __wait_for_common+0x87/0x190
[ 101.064648] ? usleep_range_state+0x90/0x90
[ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core]
[ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core]
[ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core]
[ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core]
[ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding]
[ 101.067738] ? kmalloc_trace+0x4d/0x350
[ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core]
[ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core]
[ 101.069312] bond_change_active_slave+0x392/0x900 [bonding]
[ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding]
[ 101.070454] __bond_opt_set+0xa6/0x430 [bonding]
[ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding]
[ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding]
[ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding]
[ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0
[ 101.073033] vfs_write+0x2d8/0x400
[ 101.073416] ? alloc_fd+0x48/0x180
[ 101.073798] ksys_write+0x5f/0xe0
[ 101.074175] do_syscall_64+0x52/0x110
[ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53
As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called
from bond_change_active_slave, which requires holding the RTNL lock.
And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state
xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user
context. So ipsec_lock doesn't have to be spin lock, change it to
mutex, and thus the above issue can be resolved. |
| In the Linux kernel, the following vulnerability has been resolved:
tracefs: Use generic inode RCU for synchronizing freeing
With structure layout randomization enabled for 'struct inode' we need to
avoid overlapping any of the RCU-used / initialized-only-once members,
e.g. i_lru or i_sb_list to not corrupt related list traversals when making
use of the rcu_head.
For an unlucky structure layout of 'struct inode' we may end up with the
following splat when running the ftrace selftests:
[<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object])
[<...>] ------------[ cut here ]------------
[<...>] kernel BUG at lib/list_debug.c:54!
[<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65
[<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0
[<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f
[<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283
[<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000
[<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001
[<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25
[<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d
[<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000
[<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object]
[<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0
[<...>] RSI: __func__.47+0x4340/0x4400
[<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object]
[<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550]
[<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550]
[<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550]
[<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object]
[<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000
[<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0
[<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[<...>] ASID: 0003
[<...>] Stack:
[<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0
[<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f
[<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392
[<...>] Call Trace:
[<...>] <TASK>
[<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0
[<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48
[<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88
[<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90
[<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8
[<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8
[<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40
[<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48
[<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70
[<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78
[<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80
[<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8
[<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0
[<...>] [<ffffffff8294ad20>] ? do_one_tre
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: protect concurrent access to mem_cgroup_idr
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Always drain health in shutdown callback
There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ on shutdown callback. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
This patch (of 2):
This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78.
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Avoid blocking in RCU read-side critical section
A panic happens in ima_match_policy:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 42f873067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 5 PID: 1286325 Comm: kubeletmonit.sh
Kdump: loaded Tainted: P
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 0.0.0 02/06/2015
RIP: 0010:ima_match_policy+0x84/0x450
Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39
7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d
f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea
44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f
RSP: 0018:ff71570009e07a80 EFLAGS: 00010207
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200
RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739
R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970
R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001
FS: 00007f5195b51740(0000)
GS:ff3e278b12d40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ima_get_action+0x22/0x30
process_measurement+0xb0/0x830
? page_add_file_rmap+0x15/0x170
? alloc_set_pte+0x269/0x4c0
? prep_new_page+0x81/0x140
? simple_xattr_get+0x75/0xa0
? selinux_file_open+0x9d/0xf0
ima_file_check+0x64/0x90
path_openat+0x571/0x1720
do_filp_open+0x9b/0x110
? page_counter_try_charge+0x57/0xc0
? files_cgroup_alloc_fd+0x38/0x60
? __alloc_fd+0xd4/0x250
? do_sys_open+0x1bd/0x250
do_sys_open+0x1bd/0x250
do_syscall_64+0x5d/0x1d0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by
ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a
RCU read-side critical section which contains kmalloc with GFP_KERNEL.
This implies a possible sleep and violates limitations of RCU read-side
critical sections on non-PREEMPT systems.
Sleeping within RCU read-side critical section might cause
synchronize_rcu() returning early and break RCU protection, allowing a
UAF to happen.
The root cause of this issue could be described as follows:
| Thread A | Thread B |
| |ima_match_policy |
| | rcu_read_lock |
|ima_lsm_update_rule | |
| synchronize_rcu | |
| | kmalloc(GFP_KERNEL)|
| | sleep |
==> synchronize_rcu returns early
| kfree(entry) | |
| | entry = entry->next|
==> UAF happens and entry now becomes NULL (or could be anything).
| | entry->action |
==> Accessing entry might cause panic.
To fix this issue, we are converting all kmalloc that is called within
RCU read-side critical section to use GFP_ATOMIC.
[PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: savage: Handle err return when savagefb_check_var failed
The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero")
checks the value of pixclock to avoid divide-by-zero error. However
the function savagefb_probe doesn't handle the error return of
savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
When I did memory failure tests recently, below warning occurs:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire+0xccb/0x1ca0
RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082
RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0
RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb
R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10
R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004
FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0
Call Trace:
<TASK>
lock_acquire+0xbe/0x2d0
_raw_spin_lock_irqsave+0x3a/0x60
hugepage_subpool_put_pages.part.0+0xe/0xc0
free_huge_folio+0x253/0x3f0
dissolve_free_huge_page+0x147/0x210
__page_handle_poison+0x9/0x70
memory_failure+0x4e6/0x8c0
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xbc/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9f3114887
RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887
RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001
RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
panic+0x326/0x350
check_panic_on_warn+0x4f/0x50
__warn+0x98/0x190
report_bug+0x18e/0x1a0
handle_bug+0x3d/0x70
exc_invalid_op+0x18/0x70
asm_exc_invalid_op+0x1a/0x20
RIP: 0010:__lock_acquire+0xccb/0x1ca0
RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082
RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0
RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb
R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10
R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004
lock_acquire+0xbe/0x2d0
_raw_spin_lock_irqsave+0x3a/0x60
hugepage_subpool_put_pages.part.0+0xe/0xc0
free_huge_folio+0x253/0x3f0
dissolve_free_huge_page+0x147/0x210
__page_handle_poison+0x9/0x70
memory_failure+0x4e6/0x8c0
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xbc/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9f3114887
RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887
RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001
RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00
</TASK>
After git bisecting and digging into the code, I believe the root cause is
that _deferred_list field of folio is unioned with _hugetlb_subpool field.
In __update_and_free_hugetlb_folio(), folio->_deferred_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix vf may be used uninitialized in this function warning
To fix the regression introduced by commit 52424f974bc5, which causes
servers hang in very hard to reproduce conditions with resets races.
Using two sources for the information is the root cause.
In this function before the fix bumping v didn't mean bumping vf
pointer. But the code used this variables interchangeably, so stale vf
could point to different/not intended vf.
Remove redundant "v" variable and iterate via single VF pointer across
whole function instead to guarantee VF pointer validity. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Don't access req_list while it's being manipulated
The icc_lock mutex was split into separate icc_lock and icc_bw_lock
mutexes in [1] to avoid lockdep splats. However, this didn't adequately
protect access to icc_node::req_list.
The icc_set_bw() function will eventually iterate over req_list while
only holding icc_bw_lock, but req_list can be modified while only
holding icc_lock. This causes races between icc_set_bw(), of_icc_get(),
and icc_put().
Example A:
CPU0 CPU1
---- ----
icc_set_bw(path_a)
mutex_lock(&icc_bw_lock);
icc_put(path_b)
mutex_lock(&icc_lock);
aggregate_requests()
hlist_for_each_entry(r, ...
hlist_del(...
<r = invalid pointer>
Example B:
CPU0 CPU1
---- ----
icc_set_bw(path_a)
mutex_lock(&icc_bw_lock);
path_b = of_icc_get()
of_icc_get_by_index()
mutex_lock(&icc_lock);
path_find()
path_init()
aggregate_requests()
hlist_for_each_entry(r, ...
hlist_add_head(...
<r = invalid pointer>
Fix this by ensuring icc_bw_lock is always held before manipulating
icc_node::req_list. The additional places icc_bw_lock is held don't
perform any memory allocations, so we should still be safe from the
original lockdep splats that motivated the separate locks.
[1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix performance regression in swap operation
The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.
Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback. |
