| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and
iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,
iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().
These fields may be modified concurrently by connect() or setsockopt()
on the same socket, resulting in data-races reported by KCSAN.
Fix this by snapshotting the required fields under lock_sock() before
calling hci_get_route().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff8880122135cf of 1 bytes
by task 333 on cpu 1:
memcmp+0x45/0xb0
hci_get_route+0x27e/0x490
iso_connect_cis+0x4c/0xa10
iso_sock_connect+0x60e/0xb30
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.5 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit efc9dd5590894109bce9a0bfe1fa5592dd6b20b1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fix use-after-free in store_modes()
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
gcov: use atomic counter updates to fix concurrent access crashes
GCC's GCOV instrumentation can merge global branch counters with loop
induction variables as an optimization. In inflate_fast(), the inner copy
loops get transformed so that the GCOV counter value is loaded multiple
times to compute the loop base address, start index, and end bound. Since
GCOV counters are global (not per-CPU), concurrent execution on different
CPUs causes the counter to change between loads, producing inconsistent
values and out-of-bounds memory writes.
The crash manifests during IPComp (IP Payload Compression) processing when
inflate_fast() runs concurrently on multiple CPUs:
BUG: unable to handle page fault for address: ffffd0a3c0902ffa
RIP: inflate_fast+1431
Call Trace:
zlib_inflate
__deflate_decompress
crypto_comp_decompress
ipcomp_decompress [xfrm_ipcomp]
ipcomp_input [xfrm_ipcomp]
xfrm_input
At the crash point, the compiler generated three loads from the same
global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and
end for an indexed loop. Another CPU modified the counter between loads,
making the values inconsistent - the write went 3.4 MB past a 65 KB
buffer.
Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in
the top-level Makefile, guarded by a try-run compile test. The test
compiles a minimal program with and without -fprofile-update=prefer-atomic
using the full KBUILD_CFLAGS, then compares undefined symbols in the
resulting object files. If prefer-atomic introduces new undefined
references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax
on arm64 with outline-atomics), the flag is not added -- the kernel does
not link against libatomic.
On architectures where GCC inlines 64-bit atomic counter updates (x86_64,
s390, ...) the test passes and the flag is enabled, preventing the
compiler from merging counters with loop induction variables and fixing
the observed concurrent-access crash.
On architectures where the flag would introduce libatomic dependencies, it
is silently omitted and behaviour is no worse than before this patch.
Move the CFLAGS_GCOV block from its original position (before the arch
Makefile include) to after the core KBUILD_CFLAGS assignments but before
the scripts/Makefile.gcc-plugins include. This placement ensures the
try-run test sees arch-specific flags (-m32, -march=,
-mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that
would break the test on clean builds when plugin shared objects do not yet
exist. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omap2: fix use-after-free in omapfb_mmap
omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that
can lead to use-after-free:
The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock),
while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock.
This allows concurrent execution.
In omapfb_mmap():
1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref
2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region
3. len = fix->smem_len; // Read from NEW region
4. vm_iomap_memory(vma, start, len); // Map NEW region memory
5. atomic_inc(&rg->map_count); // Increment OLD region!
Concurrently, OMAPFB_SETUP_PLANE can:
- Reassign ofbi->region = new_rg
- Update fix->smem_len
- OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it
This leaves userspace with a mapping to freed physical memory.
The fix is to read all required values (start, len) from the same
region reference (rg) that will have its map_count incremented,
preventing the region from being freed while still mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock. |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations.
Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime.
An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker.
Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Recover HW before retire hung submit
During recovery, it is not safe to retire the hung submit before we
recover the GPU. Retiring the submit triggers BO free and that can
result in GPU pagefaults since the GPU may be actively accessing those
BOs.
To fix this, retire the submits after gpu recovery is complete in
recover_worker().
Patchwork: https://patchwork.freedesktop.org/patch/730655/ |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never
transferred and neither object is freed:
- issue_beacon(): beacon larger than 512 bytes
- issue_probersp(): cur_network->ie_length > MAX_IE_SZ
- issue_probersp(): kzalloc() of the SSID scratch buffer fails
- issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP
Because alloc_mgtxmitframe() removes the frame and buf from their free
lists (list_del_init) without placing them on any pending list, an
orphaned pair is on no list and referenced by nobody, so it is only
reclaimed at driver teardown. Repeated hits progressively exhaust the
management-TX pools until alloc_mgtxmitframe() returns NULL and the
interface can no longer send beacons or probe/assoc responses.
Free the frame and buffer on these paths, matching the existing correct
error handling in issue_assocreq(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
