| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: IDLETIMER: Fix for possible ABBA deadlock
Deletion of the last rule referencing a given idletimer may happen at
the same time as a read of its file in sysfs:
| ======================================================
| WARNING: possible circular locking dependency detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| ------------------------------------------------------
| iptables/3303 is trying to acquire lock:
| ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20
|
| but task is already holding lock:
| ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v]
|
| which lock already depends on the new lock.
A simple reproducer is:
| #!/bin/bash
|
| while true; do
| iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| done &
| while true; do
| cat /sys/class/xt_idletimer/timers/testme >/dev/null
| done
Avoid this by freeing list_mutex right after deleting the element from
the list, then continuing with the teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Get rid of userspace_irqchip_in_use
Improper use of userspace_irqchip_in_use led to syzbot hitting the
following WARN_ON() in kvm_timer_update_irq():
WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459
kvm_timer_update_irq+0x21c/0x394
Call trace:
kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459
kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968
kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264
kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline]
kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline]
kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695
kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The following sequence led to the scenario:
- Userspace creates a VM and a vCPU.
- The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during
KVM_ARM_VCPU_INIT.
- Without any other setup, such as vGIC or vPMU, userspace issues
KVM_RUN on the vCPU. Since the vPMU is requested, but not setup,
kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change().
As a result, KVM_RUN returns after enabling the timer, but before
incrementing 'userspace_irqchip_in_use':
kvm_arch_vcpu_run_pid_change()
ret = kvm_arm_pmu_v3_enable()
if (!vcpu->arch.pmu.created)
return -EINVAL;
if (ret)
return ret;
[...]
if (!irqchip_in_kernel(kvm))
static_branch_inc(&userspace_irqchip_in_use);
- Userspace ignores the error and issues KVM_ARM_VCPU_INIT again.
Since the timer is already enabled, control moves through the
following flow, ultimately hitting the WARN_ON():
kvm_timer_vcpu_reset()
if (timer->enabled)
kvm_timer_update_irq()
if (!userspace_irqchip())
ret = kvm_vgic_inject_irq()
ret = vgic_lazy_init()
if (unlikely(!vgic_initialized(kvm)))
if (kvm->arch.vgic.vgic_model !=
KVM_DEV_TYPE_ARM_VGIC_V2)
return -EBUSY;
WARN_ON(ret);
Theoretically, since userspace_irqchip_in_use's functionality can be
simply replaced by '!irqchip_in_kernel()', get rid of the static key
to avoid the mismanagement, which also helps with the syzbot issue. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx93-blk-ctrl: correct remove path
The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.
Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!" |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client
A number of Zen4 client SoCs advertise the ability to use virtualized
VMLOAD/VMSAVE, but using these instructions is reported to be a cause
of a random host reboot.
These instructions aren't intended to be advertised on Zen4 client
so clear the capability. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lock recursion
afs_wake_up_async_call() can incur lock recursion. The problem is that it
is called from AF_RXRPC whilst holding the ->notify_lock, but it tries to
take a ref on the afs_call struct in order to pass it to a work queue - but
if the afs_call is already queued, we then have an extraneous ref that must
be put... calling afs_put_call() may call back down into AF_RXRPC through
rxrpc_kernel_shutdown_call(), however, which might try taking the
->notify_lock again.
This case isn't very common, however, so defer it to a workqueue. The oops
looks something like:
BUG: spinlock recursion on CPU#0, krxrpcio/7001/1646
lock: 0xffff888141399b30, .magic: dead4ead, .owner: krxrpcio/7001/1646, .owner_cpu: 0
CPU: 0 UID: 0 PID: 1646 Comm: krxrpcio/7001 Not tainted 6.12.0-rc2-build3+ #4351
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x70
do_raw_spin_lock+0x3c/0x90
rxrpc_kernel_shutdown_call+0x83/0xb0
afs_put_call+0xd7/0x180
rxrpc_notify_socket+0xa0/0x190
rxrpc_input_split_jumbo+0x198/0x1d0
rxrpc_input_data+0x14b/0x1e0
? rxrpc_input_call_packet+0xc2/0x1f0
rxrpc_input_call_event+0xad/0x6b0
rxrpc_input_packet_on_conn+0x1e1/0x210
rxrpc_input_packet+0x3f2/0x4d0
rxrpc_io_thread+0x243/0x410
? __pfx_rxrpc_io_thread+0x10/0x10
kthread+0xcf/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x24/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: prevent possible tunnel refcount underflow
When a session is created, it sets a backpointer to its tunnel. When
the session refcount drops to 0, l2tp_session_free drops the tunnel
refcount if session->tunnel is non-NULL. However, session->tunnel is
set in l2tp_session_create, before the tunnel refcount is incremented
by l2tp_session_register, which leaves a small window where
session->tunnel is non-NULL when the tunnel refcount hasn't been
bumped.
Moving the assignment to l2tp_session_register is trivial but
l2tp_session_create calls l2tp_session_set_header_len which uses
session->tunnel to get the tunnel's encap. Add an encap arg to
l2tp_session_set_header_len to avoid using session->tunnel.
If l2tpv3 sessions have colliding IDs, it is possible for
l2tp_v3_session_get to race with l2tp_session_register and fetch a
session which doesn't yet have session->tunnel set. Add a check for
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
pinmux: Use sequential access to access desc->pinmux data
When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.
Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.
Serialize the access to mux related setting with a mutex lock.
cpu0 (process A) cpu1(process B)
pinctrl_select_state() { pinctrl_select_state() {
pin_request() { pin_request() {
...
....
} else {
desc->mux_usecount++;
desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
if (desc->mux_usecount > 1)
return 0;
desc->mux_owner = owner;
} } |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Don't access req_list while it's being manipulated
The icc_lock mutex was split into separate icc_lock and icc_bw_lock
mutexes in [1] to avoid lockdep splats. However, this didn't adequately
protect access to icc_node::req_list.
The icc_set_bw() function will eventually iterate over req_list while
only holding icc_bw_lock, but req_list can be modified while only
holding icc_lock. This causes races between icc_set_bw(), of_icc_get(),
and icc_put().
Example A:
CPU0 CPU1
---- ----
icc_set_bw(path_a)
mutex_lock(&icc_bw_lock);
icc_put(path_b)
mutex_lock(&icc_lock);
aggregate_requests()
hlist_for_each_entry(r, ...
hlist_del(...
<r = invalid pointer>
Example B:
CPU0 CPU1
---- ----
icc_set_bw(path_a)
mutex_lock(&icc_bw_lock);
path_b = of_icc_get()
of_icc_get_by_index()
mutex_lock(&icc_lock);
path_find()
path_init()
aggregate_requests()
hlist_for_each_entry(r, ...
hlist_add_head(...
<r = invalid pointer>
Fix this by ensuring icc_bw_lock is always held before manipulating
icc_node::req_list. The additional places icc_bw_lock is held don't
perform any memory allocations, so we should still be safe from the
original lockdep splats that motivated the separate locks.
[1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Fix a deadlock issue related to automatic dump
If we issue a disabling PHY command, the device attached with it will go
offline, if a 2 bit ECC error occurs at the same time, a hung task may be
found:
[ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds.
[ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.674809] task:kworker/u256:0 state:D stack: 0 pid:165233 ppid: 2 flags:0x00000208
[ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas]
[ 4613.691518] Call trace:
[ 4613.694678] __switch_to+0xf8/0x17c
[ 4613.698872] __schedule+0x660/0xee0
[ 4613.703063] schedule+0xac/0x240
[ 4613.706994] schedule_timeout+0x500/0x610
[ 4613.711705] __down+0x128/0x36c
[ 4613.715548] down+0x240/0x2d0
[ 4613.719221] hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main]
[ 4613.726618] sas_execute_internal_abort+0x144/0x310 [libsas]
[ 4613.732976] sas_execute_internal_abort_dev+0x44/0x60 [libsas]
[ 4613.739504] hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main]
[ 4613.747499] hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main]
[ 4613.753682] sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas]
[ 4613.759781] sas_unregister_common_dev+0x4c/0x7a0 [libsas]
[ 4613.765962] sas_destruct_devices+0xb8/0x120 [libsas]
[ 4613.771709] sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas]
[ 4613.778930] sas_revalidate_domain+0x60/0xa4 [libsas]
[ 4613.784716] process_one_work+0x248/0x950
[ 4613.789424] worker_thread+0x318/0x934
[ 4613.793878] kthread+0x190/0x200
[ 4613.797810] ret_from_fork+0x10/0x18
[ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds.
[ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.824538] task:kworker/u256:4 state:D stack: 0 pid:316722 ppid: 2 flags:0x00000208
[ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main]
[ 4613.841491] Call trace:
[ 4613.844647] __switch_to+0xf8/0x17c
[ 4613.848852] __schedule+0x660/0xee0
[ 4613.853052] schedule+0xac/0x240
[ 4613.856984] schedule_timeout+0x500/0x610
[ 4613.861695] __down+0x128/0x36c
[ 4613.865542] down+0x240/0x2d0
[ 4613.869216] hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main]
[ 4613.876324] hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main]
[ 4613.883019] process_one_work+0x248/0x950
[ 4613.887732] worker_thread+0x318/0x934
[ 4613.892204] kthread+0x190/0x200
[ 4613.896118] ret_from_fork+0x10/0x18
[ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds.
[ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.922852] task:kworker/u256:1 state:D stack: 0 pid:348985 ppid: 2 flags:0x00000208
[ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas]
[ 4613.939549] Call trace:
[ 4613.942702] __switch_to+0xf8/0x17c
[ 4613.946892] __schedule+0x660/0xee0
[ 4613.951083] schedule+0xac/0x240
[ 4613.955015] schedule_timeout+0x500/0x610
[ 4613.959725] wait_for_common+0x200/0x610
[ 4613.964349] wait_for_completion+0x3c/0x5c
[ 4613.969146] flush_workqueue+0x198/0x790
[ 4613.973776] sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas]
[ 4613.979960] sas_port_event_worker+0x54/0xa0 [libsas]
[ 4613.985708] process_one_work+0x248/0x950
[ 4613.990420] worker_thread+0x318/0x934
[ 4613.994868] kthread+0x190/0x200
[ 4613.998800] ret_from_fork+0x10/0x18
This is because when the device goes offline, we obtain the hisi_hba
semaphore and send the ABORT_DEV command to the device. However, the
internal abort timed out due to the 2 bit ECC error and triggers automatic
dump. In addition, since the hisi_hba semaphore has been obtained, the dump
cannot be executed and the controller cannot be reset.
Therefore, the deadlocks occur on the following circular dependencies
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid deadlock in fs reclaim with page writeback
Ext4 has a filesystem wide lock protecting ext4_writepages() calls to
avoid races with switching of journalled data flag or inode format. This
lock can however cause a deadlock like:
CPU0 CPU1
ext4_writepages()
percpu_down_read(sbi->s_writepages_rwsem);
ext4_change_inode_journal_flag()
percpu_down_write(sbi->s_writepages_rwsem);
- blocks, all readers block from now on
ext4_do_writepages()
ext4_init_io_end()
kmem_cache_zalloc(io_end_cachep, GFP_KERNEL)
fs_reclaim frees dentry...
dentry_unlink_inode()
iput() - last ref =>
iput_final() - inode dirty =>
write_inode_now()...
ext4_writepages() tries to acquire sbi->s_writepages_rwsem
and blocks forever
Make sure we cannot recurse into filesystem reclaim from writeback code
to avoid the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: VMAP_STACK overflow detection thread-safe
commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added
support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to
`shadow_stack` temporarily before switching finally to per-cpu
`overflow_stack`.
If two CPUs/harts are racing and end up in over flowing kernel stack, one
or both will end up corrupting each other state because `shadow_stack` is
not per-cpu. This patch optimizes per-cpu overflow stack switch by
directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`.
Following are the changes in this patch
- Defines an asm macro to obtain per-cpu symbols in destination
register.
- In entry.S, when overflow is detected, per-cpu overflow stack is
located using per-cpu asm macro. Computing per-cpu symbol requires
a temporary register. x31 is saved away into CSR_SCRATCH
(CSR_SCRATCH is anyways zero since we're in kernel).
Please see Links for additional relevant disccussion and alternative
solution.
Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT`
Kernel crash log below
Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT
Task stack: [0xff20000010a98000..0xff20000010a9c000]
Overflow stack: [0xff600001f7d98370..0xff600001f7d99370]
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
epc : __memset+0x60/0xfc
ra : recursive_loop+0x48/0xc6 [lkdtm]
epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80
gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88
t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0
s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000
a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000
a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff
s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90
s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684
s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10
s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4
t5 : ffffffff815dbab8 t6 : ff20000010a9bb48
status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f
Kernel panic - not syncing: Kernel stack overflow
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006754>] dump_backtrace+0x30/0x38
[<ffffffff808de798>] show_stack+0x40/0x4c
[<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c
[<ffffffff808ea2d8>] dump_stack+0x18/0x20
[<ffffffff808dec06>] panic+0x126/0x2fe
[<ffffffff800065ea>] walk_stackframe+0x0/0xf0
[<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm]
SMP: stopping secondary CPUs
---[ end Kernel panic - not syncing: Kernel stack overflow ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix accesses to uninit stack slots
Privileged programs are supposed to be able to read uninitialized stack
memory (ever since 6715df8d5) but, before this patch, these accesses
were permitted inconsistently. In particular, accesses were permitted
above state->allocated_stack, but not below it. In other words, if the
stack was already "large enough", the access was permitted, but
otherwise the access was rejected instead of being allowed to "grow the
stack". This undesired rejection was happening in two places:
- in check_stack_slot_within_bounds()
- in check_stack_range_initialized()
This patch arranges for these accesses to be permitted. A bunch of tests
that were relying on the old rejection had to change; all of them were
changed to add also run unprivileged, in which case the old behavior
persists. One tests couldn't be updated - global_func16 - because it
can't run unprivileged for other reasons.
This patch also fixes the tracking of the stack size for variable-offset
reads. This second fix is bundled in the same commit as the first one
because they're inter-related. Before this patch, writes to the stack
using registers containing a variable offset (as opposed to registers
with fixed, known values) were not properly contributing to the
function's needed stack size. As a result, it was possible for a program
to verify, but then to attempt to read out-of-bounds data at runtime
because a too small stack had been allocated for it.
Each function tracks the size of the stack it needs in
bpf_subprog_info.stack_depth, which is maintained by
update_stack_depth(). For regular memory accesses, check_mem_access()
was calling update_state_depth() but it was passing in only the fixed
part of the offset register, ignoring the variable offset. This was
incorrect; the minimum possible value of that register should be used
instead.
This tracking is now fixed by centralizing the tracking of stack size in
grow_stack_state(), and by lifting the calls to grow_stack_state() to
check_stack_access_within_bounds() as suggested by Andrii. The code is
now simpler and more convincingly tracks the correct maximum stack size.
check_stack_range_initialized() can now rely on enough stack having been
allocated for the access; this helps with the fix for the first issue.
A few tests were changed to also check the stack depth computation. The
one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv. |
| Moodle 4.2.0 through 4.5.15, 5.0.0 through 5.0.11, 5.1.0 through 5.1.8, 5.2.0 through 5.2.4, and 5.3.0 contain an information disclosure vulnerability in the core_grades_get_feedback web service. The service lacks group-membership and enrolment checks, so non-editing teachers can iterate userid values to read other groups' grade feedback and users' names and identity fields such as email. |
| Forgejo through 15.0.11, 16.0.0 through 16.0.7, and 17.0.0 through 17.0.1 contains an information disclosure vulnerability in the GetPublicKey API handler that lacks an ownership check on key lookups. Authenticated users with a read:user token or session can enumerate sequential key IDs to obtain titles, fingerprints and public key material of other users' SSH, deploy and principal keys. |
| n8n before 2.42.6, 2.43.x before 2.43.3, and 3.x before 3.0.1 contains a remote code execution vulnerability via deprecated Function, Function Item, and LangChain Code nodes running outside task runner isolation. Authenticated users who can create, modify, or import workflows naming these hidden node types can execute JavaScript in the n8n main process. |
| SQLite before 3.54.0 contains a stack exhaustion vulnerability that allows attackers to bypass the SQLITE_LIMIT_EXPR_DEPTH limit by chaining COLLATE postfix operators. Attackers can supply roughly 175,000 chained COLLATE operators in SQL or an untrusted database view to trigger unbounded recursion in sqlite3WalkExprNN() and crash the process. |
| A vulnerability in the Remote Access SSL VPN service of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to logic errors when secondary authentication is configured on a tunnel group. An attacker could exploit this vulnerability by sending a crafted request when connecting to the SSL remote access VPN. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A flaw was found in libmodulemd. When parsing module metadata, the xmd field is converted into nested GVariant values through recursive YAML mapping and sequence helpers without a recursion-depth or node-count limit. An attacker who can supply crafted modulemd YAML with deeply nested xmd content can cause stack exhaustion or excessive resource consumption, resulting in a denial of service. |
| Python-Markdown 3.0 through 3.11.2 contains an algorithmic complexity vulnerability in inline link parsing that allows remote attackers to exhaust CPU through unmatched brackets. Attackers can submit short Markdown containing repeated [ or 