| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libusb before version 1.0.30 contains a one-byte out-of-bounds read vulnerability in parse_iad_array() in descriptor.c that allows attackers to trigger a denial of service by supplying a malformed USB descriptor whose bLength equals size minus one, causing the bounds check to use the original buffer size instead of the remaining size. Attackers in virtualized environments with USB passthrough can supply crafted descriptors through libusb_get_active_interface_association_descriptors or libusb_get_interface_association_descriptors to read one byte past the end of the malloc allocation, resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix memory access flags in helper prototypes
After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Fix reservation of unaccepted memory table
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix unwinding in error path in rocket_probe
When rocket_core_init() fails (as could be the case with EPROBE_DEFER),
we need to properly unwind by decrementing the counter we just
incremented and if this is the first core we failed to probe, remove the
rocket DRM device with rocket_device_fini() as well. This matches the
logic in rocket_remove(). Failing to properly unwind results in
out-of-bounds accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp
Users can set damos_quota_goal->nid with arbitrary value for
node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA()
without a validation of the value. This can result in out of bounds
memory access. The issue can actually triggered using DAMON user-space
tool (damo), like below.
$ sudo mkdir /sys/fs/cgroup/foo
$ sudo ./damo start --damos_action stat --damos_quota_interval 1s \
--damos_quota_goal node_memcg_used_bp 50% -1 /foo
$ sudo dmseg
[...]
[ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00
Fix this issue by adding the validation of the given node id. If an
invalid node id is given, it returns 0% for used memory ratio, and 100%
for free memory ratio. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Tahoe 26. An app may be able to cause unexpected system termination. |
| FastNetMon Community Edition through 1.2.9 contains multiple out-of-bounds reads in the BGP MP_REACH_NLRI IPv6 attribute decoder. The function decode_mp_reach_ipv6() in src/bgp_protocol.cpp contains a TODO comment at line 156 explicitly acknowledging 'we should add sanity checks to avoid reads after attribute memory block.' The function casts raw pointers to structure types without verifying sufficient data exists (line 158), uses the attacker-controlled length_of_next_hop field to determine memcpy size (line 181), and computes prefix_length by dereferencing a pointer calculated from multiple attacker-controlled offsets without bounds validation (line 189). The prefix_length is then used to calculate number_of_bytes_required_for_prefix which becomes a memcpy length (line 202) with no check against remaining buffer size. |
| Memory safety bugs present in Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird ESR 140.9, Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150, Firefox ESR 115.35, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and prior, a malformed HEIF sequence file can trigger an out-of-bounds read in core sequence parsing logic, causing DoS. A malformed file can have stco.entry_count == 0 (creating no chunks) while still passing validation because saio.entry_count == 0 matches, but with saiz.sample_count > 0 the SampleAuxInfoReader constructor still enters its loop. This leads to an out-of-bounds dereference on the empty chunks[0] in chunked mode. |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and prior, a crafted HEIF sequence file where the saiz box declares more samples than actually exist in the track's chunk table causes a heap-buffer-overflow (out-of-bounds read) in the SampleAuxInfoReader constructor. The SampleAuxInfoReader constructor iterates over saiz->get_num_samples() samples but doesn't validate that this count is consistent with the number of chunks in the chunks vector. When saiz declares more samples than the chunks cover, the loop increments current_chunk past chunks.size(), causing an out-of-bounds read on the chunks vector. The vulnerability is triggered during file parsing (heif_context_read_from_file) without any additional user interaction. Any application using libheif to open untrusted HEIF files is affected. This issue has been fixed in version 1.22.0. |
| FastNetMon Community Edition through 1.2.9 contains an out-of-bounds read in the NetFlow v9 options template parser. In process_netflow_v9_options_template() (src/netflow_plugin/netflow_v9_collector.cpp), the scope parsing loop (lines 224-229) iterates until scopes_offset reaches the attacker-controlled option_scope_length value, reading netflow9_template_flowset_record_t structures at each step. No bounds check validates that (zone_address + scopes_offset + sizeof(record)) stays within the flowset. The same issue affects the options field loop (lines 241-257) with option_length. Furthermore, option_scope_length is not validated to be a multiple of sizeof(netflow9_template_flowset_record_t), potentially causing misaligned reads. An attacker can trigger reads past the end of the UDP packet buffer. |
| FastNetMon Community Edition through 1.2.9 contains an out-of-bounds read vulnerability in the NetFlow v9 data flowset processor. In src/netflow_plugin/netflow_v9_collector.cpp, the Data template branch (lines 1695-1702) iterates over flow records without performing a per-iteration bounds check against the packet end pointer. In contrast, the Options template branch (lines 1709-1719) correctly checks 'if (pkt + offset + field_template->total_length > packet_end)' before each iteration. The Data branch omits this check entirely. Since template definitions are sent by the network peer (and are unauthenticated UDP), an attacker can craft templates that cause the parser to read arbitrary memory past the packet buffer. This can leak sensitive memory contents or cause a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds
read in rtw_get_ie() parser"), we don't trust the data in the frame so
we should check the length better before acting on it |
| A weakness has been identified in GNU LibreDWG up to 0.14. The impacted element is the function read_2004_compressed_section of the file src/decode.c of the component Dwgbmp Utility. Executing a manipulation can lead to out-of-bounds read. The attack requires local access. The exploit has been made available to the public and could be used for attacks. This patch is called 8f03865f37f5d4ffd616fef802acc980be54d300. It is advisable to implement a patch to correct this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie
The current code checks 'i + 5 < in_len' at the end of the if statement.
However, it accesses 'in_ie[i + 5]' before that check, which can lead
to an out-of-bounds read. Move the length check to the beginning of the
conditional to ensure the index is within bounds before accessing the
array. |
| A weakness has been identified in GNU LibreDWG up to 0.14. Affected is the function bit_convert_TU of the file programs/dwggrep.c of the component Dwggrep Utility. This manipulation causes out-of-bounds read. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. Patch name: be996bf2178a40e98720f18c2414815d244413db. Applying a patch is the recommended action to fix this issue. |
| NLnet Labs Unbound 1.6.2 up to and including version 1.25.0 has a denial of service vulnerability when compiled with DNSCrypt support ('--enable-dnscrypt'). A bad DNSCrypt query could underflow Unbound's DNSCrypt packet reading procedure that may lead to heap overflow. A malicious actor can exploit the vulnerability with a single bad DNSCrypt query that its decrypted plaintext consists entirely of '0x00' bytes and does not contain the expected '0x80' marker. Unbound would then start reading more bytes than necessary until it finds a non-'0x00' byte. Based on the underlying memory allocator and the memory layout, it could lead to heap overflow while reading followed by a crash. Likelihood of a crash is low, since it relies heavily on the underlying memory allocator and the memory layout. If the heap overflow does not happen, Unbound's later packet checks will deny the packet. Unbound 1.25.1 contains a patch with a fix to bound reading in the given buffer space. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix potencial OOB in get_file_all_info() for compound requests
When a compound request consists of QUERY_DIRECTORY + QUERY_INFO
(FILE_ALL_INFORMATION) and the first command consumes nearly the entire
max_trans_size, get_file_all_info() would blindly call smbConvertToUTF16()
with PATH_MAX, causing out-of-bounds write beyond the response buffer.
In get_file_all_info(), there was a missing validation check for
the client-provided OutputBufferLength before copying the filename into
FileName field of the smb2_file_all_info structure.
If the filename length exceeds the available buffer space, it could lead to
potential buffer overflows or memory corruption during smbConvertToUTF16
conversion. This calculating the actual free buffer size using
smb2_calc_max_out_buf_len() and returning -EINVAL if the buffer is
insufficient and updating smbConvertToUTF16 to use the actual filename
length (clamped by PATH_MAX) to ensure a safe copy operation. |
| Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0. |
| Out-of-bounds read in Microsoft Graphics Component allows an unauthorized attacker to disclose information locally. |
