| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: revalidate ihl to prevent out-of-bounds access
While the outer IP header is already pulled into the skb head,
we must be careful and revalidate the embedded headers after
reading them from the skb frags to prevent out-of-bounds
access.
One such place reported by Sashiko is ip_vs_nat_icmp() where
local process can change the ihl field and after
skb_ensure_writable() we can see larger value which is a
problem for the ip_send_check(cih) calls.
Add check to drop the packet if the ihl field is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: skip hash tables in u32_bind_class()
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: fix tunnel and session refcount leak on seq_file release
In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state
(pd->tunnel and pd->session) is kept in seq_file private data to allow
iteration across multiple read() system calls.
However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels
before reading to end-of-file (EOF), any tunnel or session reference stored in
pd->tunnel / pd->session is left un-dropped when seq_file private data is freed.
Fix this by dropping any remaining pd->tunnel and pd->session references in
pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations.
Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime.
An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker.
Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Recover HW before retire hung submit
During recovery, it is not safe to retire the hung submit before we
recover the GPU. Retiring the submit triggers BO free and that can
result in GPU pagefaults since the GPU may be actively accessing those
BOs.
To fix this, retire the submits after gpu recovery is complete in
recover_worker().
Patchwork: https://patchwork.freedesktop.org/patch/730655/ |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never
transferred and neither object is freed:
- issue_beacon(): beacon larger than 512 bytes
- issue_probersp(): cur_network->ie_length > MAX_IE_SZ
- issue_probersp(): kzalloc() of the SSID scratch buffer fails
- issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP
Because alloc_mgtxmitframe() removes the frame and buf from their free
lists (list_del_init) without placing them on any pending list, an
orphaned pair is on no list and referenced by nobody, so it is only
reclaimed at driver teardown. Repeated hits progressively exhaust the
management-TX pools until alloc_mgtxmitframe() returns NULL and the
interface can no longer send beacons or probe/assoc responses.
Free the frame and buffer on these paths, matching the existing correct
error handling in issue_assocreq(). |
| When libcurl uses libssh2 with a hashed `known_hosts` file, an unrelated
initial entry can cause host key validation to report a key *mismatch* as a
*missing* key to the `CURLOPT_SSH_KEYFUNCTION` callback. |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in
the `IMAP APPEND {N}` literal while transmitting line-ending expanded data.
The server reads only $N$ bytes for the payload, causing the remaining
overflow bytes to be interpreted and executed as pipelined IMAP commands
within the authenticated session. |
| An authenticated HTTPS origin can supply an HSTS `max-age` value that the
parser accepts, but time serialization later fails to process. On 64-bit
systems, extreme max-age values compute an absolute expiry within standard
time integer limits that exceeds calendar time structure bounds. During cache
saves, the original HSTS file is truncated before writing a temporary
replacement; when serialization fails, the temporary file is deleted, leaving
an empty or partial cache. Because the save error is silently ignored during
cleanup, curl exits successfully despite the data loss. |
| Importing a `includeSubDomains` parent HSTS entry before a longer-lived child
entry, silently drops the child. Consequently, when the parent expires, the
child's valid HSTS policy is lost, causing curl to issue unencrypted HTTP
requests rather than upgrading to HTTPS. |
| When using ambient user credentials, an HTTP request directed to one origin
may be dispatched over a connection previously authenticated via Negotiate for
a different origin, leaving the request's intended credentials unused. |
| libcurl's connection cache match function never considers the automatic client
certificate option, so a cached, already authenticated Schannel connection can
be handed to a transfer that got redirected to a different origin, even though
the code explicitly switched off the auto client cert option for that transfer
to prevent exactly this. |
| An HTTP proxy can trick libcurl into sending the origin's credentials (Basic
password, or a Negotiate/Kerberos ticket) to the proxy itself, by answering
the `CONNECT` tunnel request with 401 `WWW-Authenticate:` instead of the
expected 407 `Proxy-Authenticate:`. |
| When using an *ambient user* in a first transfer doing Negotiate
authentication and asked to follow redirects, curl could pass on its
credential details to an unrelated second origin when asked to redirect there. |
| The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites.
Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed. |
| FOSSBilling before 0.8.9 contains a Cross-Site Request Forgery vulnerability in the staff guest login endpoint (POST /api/guest/staff/login) that allows remote attackers to force authentication because checkGuestClientAuthentication() only allowlists client_login and client_create, leaving staff_login without CSRF or Origin validation. Attackers can host an auto-submitting HTML form with attacker-controlled credentials to silently log a victim's browser into the attacker's staff account. |
| Prometheus through 3.15.1 contains a credential leak vulnerability that allows attackers to capture Azure AD or Google IAM bearer tokens by redirecting remote_write requests to another host. Attackers controlling the remote-write endpoint or a redirecting server can return a 3xx to their host and replay the token, for example to write metrics to the victim's backend. |
| phpMyAdmin through 5.2.3 contains a stored cross-site scripting vulnerability that allows database users with CREATE privilege to inject script via unescaped table names in DesignerHistory.display(). Attackers can create a table whose name contains HTML markup that executes in another user's session when they add a condition on it in Designer query mode. |
| phpMyAdmin through 5.2.3 contains an sql injection vulnerability that allows authenticated users to inject SQL by supplying unescaped col_extra and col_attribute values to /database/central-columns. Attackers can inject SQL into pma__central_columns INSERT and UPDATE queries run with controluser privileges, reading or modifying other users' configuration-storage data. |