| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco IOS 12.2 and 15.0 through 15.3 and IOS XE 3.1 through 3.9 allow remote attackers to cause a denial of service (device restart) via a crafted IPv4 Multicast Source Discovery Protocol (MSDP) Source-Active (SA) message, aka Bug ID CSCud36767. |
| Cisco IOS XE 2.x and 3.x before 3.10.6S, 3.11.xS through 3.13.xS before 3.13.3S, and 3.14.xS through 3.15.xS before 3.15.1S allows remote attackers to cause a denial of service (device reload) via IPv4 packets that require NAT and MPLS actions, aka Bug ID CSCut96933. |
| The AAA service in Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.1 through 3.18 and 16.2 allows remote attackers to cause a denial of service (device reload) via a failed SSH connection attempt that is mishandled during generation of an error-log message, aka Bug ID CSCuy87667. |
| A vulnerability in the Transaction Language 1 (TL1) code of Cisco ASR 900 Series routers could allow an unauthenticated, remote attacker to cause a reload of, or remotely execute code on, the affected system. This vulnerability affects Cisco ASR 900 Series Aggregation Services Routers (ASR902, ASR903, and ASR907) that are running the following releases of Cisco IOS XE Software: 3.17.0S 3.17.1S 3.17.2S 3.18.0S 3.18.1S. More Information: CSCuy15175. Known Affected Releases: 15.6(1)S 15.6(2)S. Known Fixed Releases: 15.6(1)S2.12 15.6(1.17)S0.41 15.6(1.17)SP 15.6(2)SP 16.4(0.183) 16.5(0.10). |
| A vulnerability in the package unbundle utility of Cisco IOS XE Software could allow an authenticated, local attacker to gain write access to some files in the underlying operating system. This vulnerability affects the following products if they are running a vulnerable release of Cisco IOS XE Software: Cisco 5700 Series Wireless LAN Controllers, Cisco Catalyst 3650 Series Switches, Cisco Catalyst 3850 Series Switches, Cisco Catalyst 4500E Series Switches, Cisco Catalyst 4500X Series Switches. More Information: CSCva60013 CSCvb22622. Known Affected Releases: 3.7(0) 16.4.1 Denali-16.1.3 Denali-16.2.2 Denali-16.3.1. Known Fixed Releases: 15.2(4)E3 16.1(2.208) 16.2(2.42) 16.3(1.22) 16.4(0.190) 16.5(0.29). |
| Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174. |
| A vulnerability in Cisco IOS XE Software running on Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause a configuration integrity change to the vty line configuration on an affected device. This vulnerability affects the following releases of Cisco IOS XE Software running on Cisco cBR-8 Converged Broadband Routers: All 3.16S releases, All 3.17S releases, Release 3.18.0S, Release 3.18.1S, Release 3.18.0SP. More Information: CSCuz62815. Known Affected Releases: 15.5(3)S2.9, 15.6(2)SP. Known Fixed Releases: 15.6(1.7)SP1, 16.4(0.183), 16.5(0.1). |
| The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410. |
| The OSPF implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.3, IOS-XE 2.x through 3.9.xS, ASA and PIX 7.x through 9.1, FWSM, NX-OS, and StarOS before 14.0.50488 does not properly validate Link State Advertisement (LSA) type 1 packets before performing operations on the LSA database, which allows remote attackers to cause a denial of service (routing disruption) or obtain sensitive packet information via a (1) unicast or (2) multicast packet, aka Bug IDs CSCug34485, CSCug34469, CSCug39762, CSCug63304, and CSCug39795. |
| A Path Traversal vulnerability in the diagnostic shell for Cisco IOS and IOS XE Software could allow an authenticated, local attacker to use certain diagnostic shell commands that can overwrite system files. These system files may be sensitive and should not be able to be overwritten by a user of the diagnostic shell. The vulnerability is due to lack of proper input validation for certain diagnostic shell commands. An attacker could exploit this vulnerability by authenticating to the device, entering the diagnostic shell, and providing crafted user input to commands at the local diagnostic shell CLI. Successful exploitation could allow the attacker to overwrite system files that should be restricted. Cisco Bug IDs: CSCvg41950. |
| A vulnerability in Cisco IOS XE Software could allow an unauthenticated, remote attacker to log in to a device running an affected release of Cisco IOS XE Software with the default username and password that are used at initial boot, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with privilege level 15 that has a default username and password. An attacker could exploit this vulnerability by using this account to remotely connect to an affected device. A successful exploit could allow the attacker to log in to the device with privilege level 15 access. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software Release 16.x. This vulnerability does not affect Cisco IOS XE Software releases prior to Release 16.x. Cisco Bug IDs: CSCve89880. |
| A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability exists because the affected software does not reset the privilege level for each web UI session. An attacker who has valid credentials for an affected device could exploit this vulnerability by remotely accessing a VTY line to the device. A successful exploit could allow the attacker to access an affected device with the privileges of the user who previously logged in to the web UI. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled and authentication, authorization, and accounting (AAA) authorization is not configured for EXEC sessions. The default state of the HTTP Server feature is version-dependent. This vulnerability was introduced in Cisco IOS XE Software Release 16.1.1. Cisco Bug IDs: CSCvf71769. |
| A vulnerability in the Zone-Based Firewall code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a device to reload. The vulnerability is due to the way fragmented packets are handled in the firewall code. An attacker could exploit this vulnerability by sending fragmented IP Version 4 or IP Version 6 packets through an affected device. An exploit could allow the attacker to cause the device to crash, resulting in a denial of service (DoS) condition. The following releases of Cisco IOS XE Software are vulnerable: Everest-16.4.1, Everest-16.4.2, Everest-16.5.1, Everest-16.5.1b, Everest-16.6.1, Everest-16.6.1a. Cisco Bug IDs: CSCvf60296. |
| A vulnerability in Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of memory resources, referred to as a double free. An attacker could exploit this vulnerability by sending crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. To exploit this vulnerability via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability via SNMP Version 3, the attacker must know the user credentials for the affected system. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, have been configured to be queried over SNMP, and have Network Address Translation (NAT) enabled. Cisco Bug IDs: CSCve75818. |
| A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185. |
| A vulnerability in the Internet Group Management Protocol (IGMP) packet-processing functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust buffers on an affected device, resulting in a denial of service (DoS) condition, aka a Memory Leak. The vulnerability is due to the affected software insufficiently processing IGMP Membership Query packets that are sent to an affected device. An attacker could exploit this vulnerability by sending a large number of IGMP Membership Query packets, which contain certain values, to an affected device. A successful exploit could allow the attacker to exhaust buffers on the affected device, resulting in a DoS condition that requires the device to be reloaded manually. This vulnerability affects: Cisco Catalyst 4500 Switches with Supervisor Engine 8-E, if they are running Cisco IOS XE Software Release 3.x.x.E and IP multicast routing is configured; Cisco devices that are running Cisco IOS XE Software Release 16.x, if IP multicast routing is configured. Cisco Bug IDs: CSCuw09295, CSCve94496. |
| A vulnerability in the Cisco Umbrella Integration feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition, related to the OpenDNS software. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvb86327. |
| Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370. |
| A vulnerability in the IP Version 4 (IPv4) processing code of Cisco IOS XE Software running on Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IPv4 packets. An attacker could exploit this vulnerability by sending specific IPv4 packets to an IPv4 address on an affected device. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. If the switch does not reboot when under attack, it would require manual intervention to reload the device. This vulnerability affects Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches that are running Cisco IOS XE Software Release 16.1.1 or later, until the first fixed release, and are configured with an IPv4 address. Cisco Bug IDs: CSCvd80714. |
| Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542. |
