| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mt7621: Add sentinel to quirks table
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.
This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:
commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Fix it by adding the required sentinel. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()
The bounds checks in snd_soc_put_volsw_sx() are only being applied to the
first channel, meaning it is possible to write out of bounds values to the
second channel in stereo controls. Add appropriate checks. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix perf_pending_task() UaF
Per syzbot it is possible for perf_pending_task() to run after the
event is free()'d. There are two related but distinct cases:
- the task_work was already queued before destroying the event;
- destroying the event itself queues the task_work.
The first cannot be solved using task_work_cancel() since
perf_release() itself might be called from a task_work (____fput),
which means the current->task_works list is already empty and
task_work_cancel() won't be able to find the perf_pending_task()
entry.
The simplest alternative is extending the perf_event lifetime to cover
the task_work.
The second is just silly, queueing a task_work while you know the
event is going away makes no sense and is easily avoided by
re-arranging how the event is marked STATE_DEAD and ensuring it goes
through STATE_OFF on the way down. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Initialize mailbox message for VF reset
When a MAC address is not assigned to the VF, that portion of the message
sent to the VF is not set. The memory, however, is allocated from the
stack meaning that information may be leaked to the VM. Initialize the
message buffer to 0 so that no information is passed to the VM in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: Prevent buffer overflow in setup handler
Setup function uvc_function_setup permits control transfer
requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE),
data stage handler for OUT transfer uses memcpy to copy req->actual
bytes to uvc_event->data.data array of size 60. This may result
in an overflow of 4 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix u8 overflow
By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases
multiple times and eventually it will wrap around the maximum number
(i.e., 255).
This patch prevents this by adding a boundary check with
L2CAP_MAX_CONF_RSP
Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64) 0.264594
= Note: Bluetooth subsystem version 2.22 0.264636
@ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00 [hci0] 13.900426
(...)
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106
invalid packet size (12 != 1033)
08 00 01 00 02 01 04 00 01 10 ff ff ............
> ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561
invalid packet size (14 != 1547)
0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@.....
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@.......
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@.......
= bluetoothd: Bluetooth daemon 5.43 14.401828
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753
invalid packet size (12 != 1033)
08 00 01 00 04 01 04 00 40 00 00 00 ........@... |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Fix preallocation discarding at indirect extent boundary
When preallocation extent is the first one in the extent block, the
code would corrupt extent tree header instead. Fix the problem and use
udf_delete_aext() for deleting extent to avoid some code duplication. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: Fix yet more sched_fork() races
Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an
invalid sched_task_group") fixed a fork race vs cgroup, it opened up a
race vs syscalls by not placing the task on the runqueue before it
gets exposed through the pidhash.
Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is
trying to fix a single instance of this, instead fix the whole class
of issues, effectively reverting this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: make apf token non-zero to fix bug
In current async pagefault logic, when a page is ready, KVM relies on
kvm_arch_can_dequeue_async_page_present() to determine whether to deliver
a READY event to the Guest. This function test token value of struct
kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a
READY event is finished by Guest. If value is zero meaning that a READY
event is done, so the KVM can deliver another.
But the kvm_arch_setup_async_pf() may produce a valid token with zero
value, which is confused with previous mention and may lead the loss of
this READY event.
This bug may cause task blocked forever in Guest:
INFO: task stress:7532 blocked for more than 1254 seconds.
Not tainted 5.10.0 #16
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress state:D stack: 0 pid: 7532 ppid: 1409
flags:0x00000080
Call Trace:
__schedule+0x1e7/0x650
schedule+0x46/0xb0
kvm_async_pf_task_wait_schedule+0xad/0xe0
? exit_to_user_mode_prepare+0x60/0x70
__kvm_handle_async_pf+0x4f/0xb0
? asm_exc_page_fault+0x8/0x30
exc_page_fault+0x6f/0x110
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x402d00
RSP: 002b:00007ffd31912500 EFLAGS: 00010206
RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0
RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0
RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086
R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000
R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: Handle failure to register sensor with thermal zone correctly
If an attempt is made to a sensor with a thermal zone and it fails,
the call to devm_thermal_zone_of_sensor_register() may return -ENODEV.
This may result in crashes similar to the following.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd
...
Internal error: Oops: 96000021 [#1] PREEMPT SMP
...
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x18/0x60
lr : thermal_zone_device_update+0x40/0x2e0
sp : ffff800014c4fc60
x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790
x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000
x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd
x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000
x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040
x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000
x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd
x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd
Call trace:
mutex_lock+0x18/0x60
hwmon_notify_event+0xfc/0x110
0xffffdde1cb7a0a90
0xffffdde1cb7a0b7c
irq_thread_fn+0x2c/0xa0
irq_thread+0x134/0x240
kthread+0x178/0x190
ret_from_fork+0x10/0x20
Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02)
Jon Hunter reports that the exact call sequence is:
hwmon_notify_event()
--> hwmon_thermal_notify()
--> thermal_zone_device_update()
--> update_temperature()
--> mutex_lock()
The hwmon core needs to handle all errors returned from calls
to devm_thermal_zone_of_sensor_register(). If the call fails
with -ENODEV, report that the sensor was not attached to a
thermal zone but continue to register the hwmon device. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix concurrent reset and removal of VFs
Commit c503e63200c6 ("ice: Stop processing VF messages during teardown")
introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is
intended to prevent some issues with concurrently handling messages from
VFs while tearing down the VFs.
This change was motivated by crashes caused while tearing down and
bringing up VFs in rapid succession.
It turns out that the fix actually introduces issues with the VF driver
caused because the PF no longer responds to any messages sent by the VF
during its .remove routine. This results in the VF potentially removing
its DMA memory before the PF has shut down the device queues.
Additionally, the fix doesn't actually resolve concurrency issues within
the ice driver. It is possible for a VF to initiate a reset just prior
to the ice driver removing VFs. This can result in the remove task
concurrently operating while the VF is being reset. This results in
similar memory corruption and panics purportedly fixed by that commit.
Fix this concurrency at its root by protecting both the reset and
removal flows using the existing VF cfg_lock. This ensures that we
cannot remove the VF while any outstanding critical tasks such as a
virtchnl message or a reset are occurring.
This locking change also fixes the root cause originally fixed by commit
c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we
can simply revert it.
Note that I kept these two changes together because simply reverting the
original commit alone would leave the driver vulnerable to worse race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix crash due to incorrect copy_map_value
When both bpf_spin_lock and bpf_timer are present in a BPF map value,
copy_map_value needs to skirt both objects when copying a value into and
out of the map. However, the current code does not set both s_off and
t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock
is placed in map value with bpf_timer, as bpf_map_update_elem call will
be able to overwrite the other timer object.
When the issue is not fixed, an overwriting can produce the following
splat:
[root@(none) bpf]# ./test_progs -t timer_crash
[ 15.930339] bpf_testmod: loading out-of-tree module taints kernel.
[ 16.037849] ==================================================================
[ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325
[ 16.039399]
[ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278
[ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014
[ 16.040485] Call Trace:
[ 16.040645] <TASK>
[ 16.040805] dump_stack_lvl+0x59/0x73
[ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.041427] kasan_report.cold+0x116/0x11b
[ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042328] ? memcpy+0x39/0x60
[ 16.042552] ? pv_hash+0xd0/0xd0
[ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0
[ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0
[ 16.043366] ? bpf_get_current_comm+0x50/0x50
[ 16.043608] ? jhash+0x11a/0x270
[ 16.043848] bpf_timer_cancel+0x34/0xe0
[ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81
[ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000
[ 16.044836] __x64_sys_nanosleep+0x5/0x140
[ 16.045119] do_syscall_64+0x59/0x80
[ 16.045377] ? lock_is_held_type+0xe4/0x140
[ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40
[ 16.046001] ? mark_held_locks+0x24/0x90
[ 16.046287] ? asm_exc_page_fault+0x1e/0x30
[ 16.046569] ? asm_exc_page_fault+0x8/0x30
[ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100
[ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 16.047405] RIP: 0033:0x7f9e4831718d
[ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023
[ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d
[ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0
[ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0
[ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30
[ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 16.051608] </TASK>
[ 16.051762] ================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add schedule points in batch ops
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: add a schedule point in io_add_buffers()
Looping ~65535 times doing kmalloc() calls can trigger soft lockups,
especially with DEBUG features (like KASAN).
[ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575]
[ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O)
[ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801
[ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98)
[ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40
[ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246
[ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001
[ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a
[ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004
[ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380
[ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0
[ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000
[ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0
[ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 253.544494] Call Trace:
[ 253.544496] <TASK>
[ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143)
[ 253.544505] __kernel_text_address (kernel/extable.c:78)
[ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19)
[ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27)
[ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143)
[ 253.544521] stack_trace_save (kernel/stacktrace.c:123)
[ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515)
[ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515)
[ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524)
[ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567)
[ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?)
[ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524)
[ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567)
[ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
[ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
[ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546)
[ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078)
[ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441)
[ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096)
[ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096)
[ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?)
[ 253.544596] __io_queue_sqe (fs/io_uring.c:?)
[ 253.544600] io_queue_sqe (fs/io_uring.c:7143)
[ 253.544603] io_submit_sqe (fs/io_uring.c:?)
[ 253.544608] io_submit_sqes (fs/io_uring.c:?)
[ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uri
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unregister flowtable hooks on netns exit
Unregister flowtable hooks before they are releases via
nf_tables_flowtable_destroy() otherwise hook core reports UAF.
BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142
Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666
CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
__dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106
dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106
print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247
__kasan_report mm/kasan/report.c:433 [inline]
__kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450
kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450
nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142
__nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429
nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571
nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232
nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline]
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652
nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652
__nft_release_hook() calls nft_unregister_flowtable_net_hooks() which
only unregisters the hooks, then after RCU grace period, it is
guaranteed that no packets add new entries to the flowtable (no flow
offload rules and flowtable hooks are reachable from packet path), so it
is safe to call nf_flow_table_free() which cleans up the remaining
entries from the flowtable (both software and hardware) and it unbinds
the flow_block. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX)
inclusive.
So NFP_MAX_MAC_INDEX (0xff) is a valid id.
In order for the error handling path to work correctly, the 'invalid'
value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range,
inclusive.
So set it to -1. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix memory leak during stateful obj update
stateful objects can be updated from the control plane.
The transaction logic allocates a temporary object for this purpose.
The ->init function was called for this object, so plain kfree() leaks
resources. We must call ->destroy function of the object.
nft_obj_destroy does this, but it also decrements the module refcount,
but the update path doesn't increment it.
To avoid special-casing the update object release, do module_get for
the update case too and release it via nft_obj_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte
When adding a rule with 32 destinations, we hit the following out-of-band
access issue:
BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70
This patch fixes the issue by both increasing the allocated buffers to
accommodate for the needed actions and by checking the number of actions
to prevent this issue when a rule with too many actions is provided. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: fix a race in configfs_{,un}register_subsystem()
When configfs_register_subsystem() or configfs_unregister_subsystem()
is executing link_group() or unlink_group(),
it is possible that two processes add or delete list concurrently.
Some unfortunate interleavings of them can cause kernel panic.
One of cases is:
A --> B --> C --> D
A <-- B <-- C <-- D
delete list_head *B | delete list_head *C
--------------------------------|-----------------------------------
configfs_unregister_subsystem | configfs_unregister_subsystem
unlink_group | unlink_group
unlink_obj | unlink_obj
list_del_init | list_del_init
__list_del_entry | __list_del_entry
__list_del | __list_del
// next == C |
next->prev = prev |
| next->prev = prev
prev->next = next |
| // prev == B
| prev->next = next
Fix this by adding mutex when calling link_group() or unlink_group(),
but parent configfs_subsystem is NULL when config_item is root.
So I create a mutex configfs_subsystem_mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ib_srp: Fix a deadlock
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync() |
