| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix err_chunk memory leaks in INIT handling
When sctp_verify_init() encounters unrecognized parameters, it allocates an
err_chunk to report them. However, this chunk is leaked in several code
paths:
1. In sctp_sf_do_5_1B_init(), if security_sctp_assoc_request() fails after
sctp_verify_init() has populated err_chunk, the function returns
immediately without freeing it.
2. In sctp_sf_do_unexpected_init(), the same leak occurs on the
security_sctp_assoc_request() failure path.
3. In sctp_sf_do_unexpected_init(), on the success path after copying
unrecognized parameters to the INIT-ACK, the function returns without
freeing err_chunk, unlike sctp_sf_do_5_1B_init() which properly frees
it.
Fix all three leaks by adding sctp_chunk_free(err_chunk) calls before
returning in the error paths and on the success path in
sctp_sf_do_unexpected_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mask pseudo pointer values in verifier logs
print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo
sources when pointer leaks are not allowed, but the mask only covers
BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE.
BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can
also be resolved to kernel pointer values before the verifier log prints
the instruction. Include them in the existing pointer classification so
the log prints 0x0 instead of the rewritten address. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| In the Linux kernel, the following vulnerability has been resolved:
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code
the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload
before overwriting it with skb_copy_bits().
skb_put() reserves nla_total_size(payload_len), i.e. the header plus the
NLA_ALIGN() padding, but only payload_len bytes are copied in. When
payload_len is not a multiple of 4 the 1-3 padding bytes are never
initialized and are leaked to user space inside the netlink message.
KMSAN confirms the leak for the software path when the packet payload
length is not 4-byte aligned:
BUG: KMSAN: kernel-infoleak in _copy_to_iter
_copy_to_iter
__skb_datagram_iter
skb_copy_datagram_iter
netlink_recvmsg
sock_recvmsg
__sys_recvfrom
Uninit was created at:
kmem_cache_alloc_node_noprof
__alloc_skb
net_dm_packet_work
Bytes 173-175 of 176 are uninitialized
Use __nla_reserve(), which sets up the attribute header and zeroes the
padding, instead of open coding the attribute construction. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: perform u64_stats updates under IRQ-disabled section
In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(),
u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were
called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local
IRQs had already been re-enabled.
Tracepoint probes can execute in IRQ or softirq context. On 32-bit
architectures, u64_stats_update_begin() disables preemption but not interrupts,
relying on seqcount writes. If a nested interrupt occurs on the same CPU during
the 64-bit stats update, the reentrant seqcount update can corrupt the
seqcount state or stats value.
Fix this by performing the 64-bit per-CPU stats update before releasing
drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain
disabled during the u64_stats update. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ACE size against SID sub-authorities
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected role
Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due
to unexpected GFN") fixed a shadow paging mismatch between stored and
computed GFNs; the bug could be triggered by changing a PDE mapping from
outside the guest, and then deleting a memslot. The rmap_remove()
call would miss entries created after the PDE change because the GFN
of the leaf SPTE does not match the GFN of the struct kvm_mmu_page.
A similar hole however remains if the modified PDE points to a non-leaf
page. In this case the gfn can be made to match, but the role does not
match: the original large 2MB page creates a kvm_mmu_page with direct=1,
while the new 4KB needs a kvm_mmu_page with direct=0. However,
kvm_mmu_get_child_sp() does not compare the role, and therefore reuses
the page.
The next step is installing a leaf (4KB) SPTE on the new path which
records an rmap entry under the gfn resolved by the walk. But when
that child is zapped its parent kvm_mmu_page has direct=1 and
kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as
sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[]
in older kernels). It therefore fails to remove the recorded entry.
When the memslot is dropped the shadow page is freed but the rmap
entry survives, as in the scenario that was already fixed. Code that
later walks that gfn (dirty logging, MMU notifier invalidation, and
so on) dereferences an sptep that lies in the freed page, causing the
use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: fix ep_remove struct eventpoll / struct file UAF
ep_remove() (via ep_remove_file()) cleared file->f_ep under
file->f_lock but then kept using @file inside the critical section
(is_file_epoll(), hlist_del_rcu() through the head, spin_unlock).
A concurrent __fput() taking the eventpoll_release() fastpath in
that window observed the transient NULL, skipped
eventpoll_release_file() and ran to f_op->release / file_free().
For the epoll-watches-epoll case, f_op->release is
ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which
kfree()s the watched struct eventpoll. Its embedded ->refs
hlist_head is exactly where epi->fllink.pprev points, so the
subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed
kmalloc-192 memory.
In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot
backing @file could be recycled by alloc_empty_file() --
reinitializing f_lock and f_ep -- while ep_remove() is still
nominally inside that lock. The upshot is an attacker-controllable
kmem_cache_free() against the wrong slab cache.
Pin @file via epi_fget() at the top of ep_remove() and gate the
critical section on the pin succeeding. With the pin held @file
cannot reach refcount zero, which holds __fput() off and
transitively keeps the watched struct eventpoll alive across the
hlist_del_rcu() and the f_lock use, closing both UAFs.
If the pin fails @file has already reached refcount zero and its
__fput() is in flight. Because we bailed before clearing f_ep,
that path takes the eventpoll_release() slow path into
eventpoll_release_file() and blocks on ep->mtx until the waiter
side's ep_clear_and_put() drops it. The bailed epi's share of
ep->refcount stays intact, so the trailing ep_refcount_dec_and_test()
in ep_clear_and_put() cannot free the eventpoll out from under
eventpoll_release_file(); the orphaned epi is then cleaned up
there.
A successful pin also proves we are not racing
eventpoll_release_file() on this epi, so drop the now-redundant
re-check of epi->dying under f_lock. The cheap lockless
READ_ONCE(epi->dying) fast-path bailout stays. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/atom: Check kcalloc() for WS buffer in amdgpu_atom_execute_table_locked()
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix missing pointer check in hda_component_manager_init function
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: start using dst_dev_rcu()
Change icmpv4_xrlim_allow(), ip_defrag() to prevent possible UAF.
Change ipmr_prepare_xmit(), ipmr_queue_fwd_xmit(), ip_mr_output(),
ipv4_neigh_lookup() to use lockdep enabled dst_dev_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: don't decrement ep refcount while still holding the ep mutex
Jann Horn points out that epoll is decrementing the ep refcount and then
doing a
mutex_unlock(&ep->mtx);
afterwards. That's very wrong, because it can lead to a use-after-free.
That pattern is actually fine for the very last reference, because the
code in question will delay the actual call to "ep_free(ep)" until after
it has unlocked the mutex.
But it's wrong for the much subtler "next to last" case when somebody
*else* may also be dropping their reference and free the ep while we're
still using the mutex.
Note that this is true even if that other user is also using the same ep
mutex: mutexes, unlike spinlocks, can not be used for object ownership,
even if they guarantee mutual exclusion.
A mutex "unlock" operation is not atomic, and as one user is still
accessing the mutex as part of unlocking it, another user can come in
and get the now released mutex and free the data structure while the
first user is still cleaning up.
See our mutex documentation in Documentation/locking/mutex-design.rst,
in particular the section [1] about semantics:
"mutex_unlock() may access the mutex structure even after it has
internally released the lock already - so it's not safe for
another context to acquire the mutex and assume that the
mutex_unlock() context is not using the structure anymore"
So if we drop our ep ref before the mutex unlock, but we weren't the
last one, we may then unlock the mutex, another user comes in, drops
_their_ reference and releases the 'ep' as it now has no users - all
while the mutex_unlock() is still accessing it.
Fix this by simply moving the ep refcount dropping to outside the mutex:
the refcount itself is atomic, and doesn't need mutex protection (that's
the whole _point_ of refcounts: unlike mutexes, they are inherently
about object lifetimes). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: extend RCU protection in igmp6_send()
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check smcd_v2_ext_offset when receiving proposal msg
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: avoid a NULL dereference with unsupported widgets
If an IPC4 topology contains an unsupported widget, its .module_info
field won't be set, then sof_ipc4_route_setup() will cause a kernel
Oops trying to dereference it. Add a check for such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, Fix internal port memory leak
The flow rule can be splited, and the extra post_act rules are added
to post_act table. It's possible to trigger memleak when the rule
forwards packets from internal port and over tunnel, in the case that,
for example, CT 'new' state offload is allowed. As int_port object is
assigned to the flow attribute of post_act rule, and its refcnt is
incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is
not called, the refcnt is never decremented, then int_port is never
freed.
The kmemleak reports the following error:
unreferenced object 0xffff888128204b80 (size 64):
comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s)
hex dump (first 32 bytes):
01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................
98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA....
backtrace:
[<00000000e992680d>] kmalloc_trace+0x27/0x120
[<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core]
[<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core]
[<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
[<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core]
[<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core]
[<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410
[<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower]
[<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower]
[<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010
[<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0
[<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360
[<0000000082dd6c8b>] netlink_unicast+0x438/0x710
[<00000000fc568f70>] netlink_sendmsg+0x794/0xc50
[<0000000016e92590>] sock_sendmsg+0xc5/0x190
So fix this by moving int_port cleanup code to the flow attribute
free helper, which is used by all the attribute free cases. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acq
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: Drop aux devices together with DP controller
Using devres to depopulate the aux bus made sure that upon a probe
deferral the EDP panel device would be destroyed and recreated upon next
attempt.
But the struct device which the devres is tied to is the DPUs
(drm_dev->dev), which may be happen after the DP controller is torn
down.
Indications of this can be seen in the commonly seen EDID-hexdump full
of zeros in the log, or the occasional/rare KASAN fault where the
panel's attempt to read the EDID information causes a use after free on
DP resources.
It's tempting to move the devres to the DP controller's struct device,
but the resources used by the device(s) on the aux bus are explicitly
torn down in the error path. The KASAN-reported use-after-free also
remains, as the DP aux "module" explicitly frees its devres-allocated
memory in this code path.
As such, explicitly depopulate the aux bus in the error path, and in the
component unbind path, to avoid these issues.
Patchwork: https://patchwork.freedesktop.org/patch/542163/ |
