Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417953 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90083 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Only operate on Ethernet frames act_ife encapsulates/decapsulates the original Ethernet header and uses skb->dev->hard_header_len as the length of that header. That is only correct for Ethernet devices: on a device where hard_header_len does not match the L2 header that was actually pulled (PPP reports PPP_HDRLEN while nothing is stripped on ingress), the ingress skb_push()/skb_pull() use the wrong length and can hit skb_under_panic when headroom is tight. IFE is Ethernet-only by design - it builds an outer ethhdr, rewrites h_source/h_dest/h_proto, and calls eth_type_trans() on decode - so instead of trying to make the offsets work for arbitrary link types, simply drop packets that do not carry an Ethernet header. Checking skb->dev->type alone is not enough. We have to cater for a corner case where mirred can redirect an skb from a non-Ethernet device to an Ethernet one, and skb->dev then says nothing about the framing the skb actually has: an skb redirected from ppp0 reaches the target's ingress hook with mac_len 0 and no Ethernet header at all. So at ingress also require mac_len to be ETH_HLEN. On egress mac_len is not maintained, so the device type is all we have; a bogus redirect there yields a malformed frame rather than an out-of-bounds push, and it would be malformed with or without IFE. That corner case is not theoretical - redirecting from ppp0 into a veth that has an ife encode action on its ingress hook panics without this patch: skbuff: skb_under_panic: len:98 put:14 head:ffff88800e410000 data:ffff88800e40fff5 tail:0x57 end:0x640 dev:veth3 kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:224 net/core/skbuff.c:2657) tcf_ife_act (net/sched/act_ife.c:829 net/sched/act_ife.c:874) tc_run (net/core/dev.c:4463) netif_receive_skb (net/core/dev.c:6463 net/core/dev.c:6522) tcf_mirred_to_dev (net/sched/act_mirred.c:248 net/sched/act_mirred.c:328) tcf_mirred_act (net/sched/act_mirred.c:489) tc_run (net/core/dev.c:4463) process_backlog (net/core/dev.c:6728) With Ethernet framing guaranteed, use ETH_HLEN instead of hard_header_len. | ||||
| CVE-2026-90076 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq: add overflow bounds to quantum and initial quantum fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 * psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill loop adds 0 to f->credit (which stays <= 0) and goto begin loops forever under the qdisc lock, creating a soft lockup. Clamp psched_mtu() to [1, 1 << 20] before multiplying so the product cannot wrap, then cap the result at 1 << 20, matching the bound already enforced on TCA_FQ_QUANTUM in fq_change(). Conditions to recreate the bug: a device whose MTU (plus hard_header_len) is large enough that 2 * psched_mtu() wraps (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90066 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify ftrace_direct_multi_init() assigns kthread_run()'s return value to simple_tsk without an IS_ERR() check. When kthread_run() fails it returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads with simple_tsk holding an error pointer. On unload, ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(), leading to a null-pointer-dereference. Check the return value of kthread_run() with IS_ERR(); on failure, unregister the ftrace direct call and propagate the error code. | ||||
| CVE-2026-90061 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip double clone set expressions on element insert Both the dynset and newsetelem path clone the existing set expressions when setting set element expressions if no override expressions are provided. This results in a double clone, once to clone the template set expressions then another clone on the new element. Add a flag to annotate if userspace provides a override expression (ie. expression of the same type of the set but different configuration), otherwise borrow the existing expression from the set. Add conditionals to release expression iif they represent an override. Use this new override_exprs flag to dump the dynset expression override to userspace. This simplifies the existing logic and it also fixes a bug with the connlimit expression which results in a module refcount imbalance WARNING splat when resorting on the default set expressions. | ||||
| CVE-2026-116593 | 1 Apache | 1 Kafka | 2026-10-30 | N/A |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations. Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime. An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker. Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. | ||||
| CVE-2026-100077 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Recover HW before retire hung submit During recovery, it is not safe to retire the hung submit before we recover the GPU. Retiring the submit triggers BO free and that can result in GPU pagefaults since the GPU may be actively accessing those BOs. To fix this, retire the submits after gpu recovery is complete in recover_worker(). Patchwork: https://patchwork.freedesktop.org/patch/730655/ | ||||
| CVE-2026-100076 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management xmit_frame together with its xmit_buf from the driver's fixed-size management-TX pools via alloc_mgtxmitframe(). On the normal path the frame is handed to dump_mgntframe(), which transfers ownership and eventually returns both objects to their pools (the frame and, for beacons, the buf in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion path). Several error/edge paths return early after a successful alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never transferred and neither object is freed: - issue_beacon(): beacon larger than 512 bytes - issue_probersp(): cur_network->ie_length > MAX_IE_SZ - issue_probersp(): kzalloc() of the SSID scratch buffer fails - issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP Because alloc_mgtxmitframe() removes the frame and buf from their free lists (list_del_init) without placing them on any pending list, an orphaned pair is on no list and referenced by nobody, so it is only reclaimed at driver teardown. Repeated hits progressively exhaust the management-TX pools until alloc_mgtxmitframe() returns NULL and the interface can no longer send beacons or probe/assoc responses. Free the frame and buffer on these paths, matching the existing correct error handling in issue_assocreq(). | ||||
| CVE-2026-87865 | 1 Curl | 1 Curl | 2026-10-30 | 7.4 High |
| When libcurl uses libssh2 with a hashed `known_hosts` file, an unrelated initial entry can cause host key validation to report a key *mismatch* as a *missing* key to the `CURLOPT_SSH_KEYFUNCTION` callback. | ||||
| CVE-2026-87864 | 1 Curl | 1 Curl | 2026-10-30 | 8.1 High |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in the `IMAP APPEND {N}` literal while transmitting line-ending expanded data. The server reads only $N$ bytes for the payload, causing the remaining overflow bytes to be interpreted and executed as pipelined IMAP commands within the authenticated session. | ||||
| CVE-2026-87863 | 1 Curl | 1 Curl | 2026-10-30 | 8.1 High |
| An authenticated HTTPS origin can supply an HSTS `max-age` value that the parser accepts, but time serialization later fails to process. On 64-bit systems, extreme max-age values compute an absolute expiry within standard time integer limits that exceeds calendar time structure bounds. During cache saves, the original HSTS file is truncated before writing a temporary replacement; when serialization fails, the temporary file is deleted, leaving an empty or partial cache. Because the save error is silently ignored during cleanup, curl exits successfully despite the data loss. | ||||
| CVE-2026-87862 | 1 Curl | 1 Curl | 2026-10-30 | 8.1 High |
| Importing a `includeSubDomains` parent HSTS entry before a longer-lived child entry, silently drops the child. Consequently, when the parent expires, the child's valid HSTS policy is lost, causing curl to issue unencrypted HTTP requests rather than upgrading to HTTPS. | ||||
| CVE-2026-87861 | 1 Curl | 1 Curl | 2026-10-30 | 9.1 Critical |
| When using ambient user credentials, an HTTP request directed to one origin may be dispatched over a connection previously authenticated via Negotiate for a different origin, leaving the request's intended credentials unused. | ||||
| CVE-2026-86415 | 1 Curl | 1 Curl | 2026-10-30 | 7.5 High |
| libcurl's connection cache match function never considers the automatic client certificate option, so a cached, already authenticated Schannel connection can be handed to a transfer that got redirected to a different origin, even though the code explicitly switched off the auto client cert option for that transfer to prevent exactly this. | ||||
| CVE-2026-86414 | 1 Curl | 1 Curl | 2026-10-30 | 9.1 Critical |
| An HTTP proxy can trick libcurl into sending the origin's credentials (Basic password, or a Negotiate/Kerberos ticket) to the proxy itself, by answering the `CONNECT` tunnel request with 401 `WWW-Authenticate:` instead of the expected 407 `Proxy-Authenticate:`. | ||||
| CVE-2026-86413 | 1 Curl | 1 Curl | 2026-10-30 | 9.1 Critical |
| When using an *ambient user* in a first transfer doing Negotiate authentication and asked to follow redirects, curl could pass on its credential details to an unrelated second origin when asked to redirect there. | ||||
| CVE-2026-114406 | 1 Redhat | 20 Advanced Cluster Security, Agentic Cluster Security Suite, Ai Inference Server and 17 more | 2026-10-30 | 6.8 Medium |
| The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed. | ||||
| CVE-2026-112374 | 1 Fossbilling | 1 Fossbilling | 2026-10-30 | 4.3 Medium |
| FOSSBilling before 0.8.9 contains a Cross-Site Request Forgery vulnerability in the staff guest login endpoint (POST /api/guest/staff/login) that allows remote attackers to force authentication because checkGuestClientAuthentication() only allowlists client_login and client_create, leaving staff_login without CSRF or Origin validation. Attackers can host an auto-submitting HTML form with attacker-controlled credentials to silently log a victim's browser into the attacker's staff account. | ||||
| CVE-2026-119566 | 1 Prometheus | 1 Prometheus | 2026-10-30 | 4.8 Medium |
| Prometheus through 3.15.1 contains a credential leak vulnerability that allows attackers to capture Azure AD or Google IAM bearer tokens by redirecting remote_write requests to another host. Attackers controlling the remote-write endpoint or a redirecting server can return a 3xx to their host and replay the token, for example to write metrics to the victim's backend. | ||||
| CVE-2026-119563 | 1 Phpmyadmin | 1 Phpmyadmin | 2026-10-30 | 5.4 Medium |
| phpMyAdmin through 5.2.3 contains a stored cross-site scripting vulnerability that allows database users with CREATE privilege to inject script via unescaped table names in DesignerHistory.display(). Attackers can create a table whose name contains HTML markup that executes in another user's session when they add a condition on it in Designer query mode. | ||||
| CVE-2026-119562 | 1 Phpmyadmin | 1 Phpmyadmin | 2026-10-30 | 4.2 Medium |
| phpMyAdmin through 5.2.3 contains an sql injection vulnerability that allows authenticated users to inject SQL by supplying unescaped col_extra and col_attribute values to /database/central-columns. Attackers can inject SQL into pma__central_columns INSERT and UPDATE queries run with controluser privileges, reading or modifying other users' configuration-storage data. | ||||