| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Detach event groups during remove_on_exec
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate SID in parent security descriptor during ACL inheritance
Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID
and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved
from the parent directory. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73) |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock between reflink and transaction commit when using flushoncommit
When using the flushoncommit mount option, we can have a deadlock between
a transaction commit and a reflink operation that copied an inline extent
to an offset beyond the current i_size of the destination node.
The deadlock happens like this:
1) Task A clones an inline extent from inode X to an offset of inode Y
that is beyond Y's current i_size. This means we copied the inline
extent's data to a folio of inode Y that is beyond its EOF, using a
call to copy_inline_to_page();
2) Task B starts a transaction commit and calls
btrfs_start_delalloc_flush() to flush delalloc;
3) The delalloc flushing sees the new dirty folio of inode Y and when it
attempts to flush it, it ends up at extent_writepage() and sees that
the offset of the folio is beyond the i_size of inode Y, so it attempts
to invalidate the folio by calling folio_invalidate(), which ends up at
btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it
tries to lock the folio's range in inode Y's extent io tree, but it
blocks since it's currently locked by task A - during a reflink we lock
the inodes and the source and destination ranges after flushing all
delalloc and waiting for ordered extent completion - after that we
don't expect to have dirty folios in the ranges, the exception is if
we have to copy an inline extent's data (because the destination offset
is not zero);
4) Task A then attempts to start a transaction to update the inode item,
and then it's blocked since the current transaction is in the
TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the
current transaction to become unblocked (its state >=
TRANS_STATE_UNBLOCKED).
So task A is waiting for the transaction commit done by task B, and
the later waiting on the extent lock of inode Y that is currently
held by task A.
Syzbot recently reported this with the following stack traces:
INFO: task kworker/u8:7:1053 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000
Workqueue: writeback wb_workfn (flush-btrfs-46)
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5298 [inline]
__schedule+0x1553/0x5240 kernel/sched/core.c:6911
__schedule_loop kernel/sched/core.c:6993 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7008
wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline]
btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914
btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline]
btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704
extent_writepage fs/btrfs/extent_io.c:1852 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline]
btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713
do_writepages+0x32e/0x550 mm/page-writeback.c:2554
__writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750
writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042
wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227
wb_do_writeback fs/fs-writeback.c:2374 [inline]
wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414
process_one_work kernel/workqueue.c:3276 [inline]
process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
INFO: task syz.4.64:6910 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.64 state:D stack:22752 pid:6910 tgid:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix clone_alias() to use the original device's devid
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not
see a reason why vb2_dma_sg should behave differently. This avoids
hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in
drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of
tree Apple ISP camera capture driver which uses vb2_dma_sg_memops.
gst-launch-1.0 v4l2src ! gtk4paintablesink
[ 38.201528] ------------[ cut here ]------------
[ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210
[ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer
snd_seq snd_seq_device uinput nf_conntrack_netbios_ns
nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep
nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc
hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic
cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev
aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2
snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor
macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi
macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3
snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon
apple_sart apple_dockchannel macsmc apple_rtkit_helper
spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses
pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core
spi_apple
[ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram
[ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full)
[ 38.219040] Tainted: [W]=WARN
[ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210
[ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210
[ 38.222178] sp : ffffc0008dc678e0
[ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480
[ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968
[ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0
[ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968
[ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8
[ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff
[ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8
[ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000
[ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038
[ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb
[ 38.231488] Call trace:
[ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P)
[ 38.232342] drm_gem_mmap+0x140/0x260
[ 38.232813] __mmap_region+0x488/0x9a0
[ 38.233277] mmap_region+0xd0/0x148
[ 38.233703] do_mmap+0x350/0x5c0
[ 38.234148] vm_mmap_pgoff+0x14c/0x200
[ 38.234612] ksys_mmap_pgoff+0x150/0x208
[ 38.235107] __arm64_sys_mmap+0x34/0x50
[ 38.235611] invoke_syscall+0x50/0x120
[ 38.236075] el0_svc_common.constprop.0+0x48/0xf0
[ 38.236680] do_el0_svc+0x24/0x38
[ 38.237113] el0_svc+0x38/0x168
[ 38.237507] el0t_64_sync_handler+0xa0/0xe8
[ 38.238034] el0t_64_sync+0x198/0x1a0
[ 38.238491] ---[ end trace 0000000000000000 ]---
There were discussions in [1] at the end of 2023 that mmap() on imported
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: vport: fix self-deadlock on release of tunnel ports
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released. |
