| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: validate MAP frame length before ingress parsing
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task exploit/147
Call Trace:
...
rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413)
__rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6089)
netif_receive_skb (net/core/dev.c:6460)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2001)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Factor that validation out of rmnet_map_deaggregate() into
rmnet_map_validate_packet_len() and run it on the no-aggregation path too.
The MAP header is bounds-checked first, since this path can receive a frame
shorter than the header. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make decode_pool() more resilient against corrupted osdmaps
If the osdmap is (maliciously) corrupted such that the encoded length
of ceph_pg_pool envelope is less than what is expected for a particular
encoding version, out-of-bounds reads may ensue because the only bounds
check that is there is based on that length value.
This patch adds explicit bounds checks for each field that is decoded
or skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
e1000: fix OOB in e1000_tbi_should_accept()
In e1000_tbi_should_accept() we read the last byte of the frame via
'data[length - 1]' to evaluate the TBI workaround. If the descriptor-
reported length is zero or larger than the actual RX buffer size, this
read goes out of bounds and can hit unrelated slab objects. The issue
is observed from the NAPI receive path (e1000_clean_rx_irq):
==================================================================
BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790
Read of size 1 at addr ffff888014114e54 by task sshd/363
CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x5a/0x74
print_address_description+0x7b/0x440
print_report+0x101/0x200
kasan_report+0xc1/0xf0
e1000_tbi_should_accept+0x610/0x790
e1000_clean_rx_irq+0xa8c/0x1110
e1000_clean+0xde2/0x3c10
__napi_poll+0x98/0x380
net_rx_action+0x491/0xa20
__do_softirq+0x2c9/0x61d
do_softirq+0xd1/0x120
</IRQ>
<TASK>
__local_bh_enable_ip+0xfe/0x130
ip_finish_output2+0x7d5/0xb00
__ip_queue_xmit+0xe24/0x1ab0
__tcp_transmit_skb+0x1bcb/0x3340
tcp_write_xmit+0x175d/0x6bd0
__tcp_push_pending_frames+0x7b/0x280
tcp_sendmsg_locked+0x2e4f/0x32d0
tcp_sendmsg+0x24/0x40
sock_write_iter+0x322/0x430
vfs_write+0x56c/0xa60
ksys_write+0xd1/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f511b476b10
Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24
RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10
RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003
RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00
R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003
</TASK>
Allocated by task 1:
__kasan_krealloc+0x131/0x1c0
krealloc+0x90/0xc0
add_sysfs_param+0xcb/0x8a0
kernel_add_sysfs_param+0x81/0xd4
param_sysfs_builtin+0x138/0x1a6
param_sysfs_init+0x57/0x5b
do_one_initcall+0x104/0x250
do_initcall_level+0x102/0x132
do_initcalls+0x46/0x74
kernel_init_freeable+0x28f/0x393
kernel_init+0x14/0x1a0
ret_from_fork+0x22/0x30
The buggy address belongs to the object at ffff888014114000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1620 bytes to the right of
2048-byte region [ffff888014114000, ffff888014114800]
The buggy address belongs to the physical page:
page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110
head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head|node=0|zone=1)
raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000
raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
==================================================================
This happens because the TBI check unconditionally dereferences the last
byte without validating the reported length first:
u8 last_byte = *(data + length - 1);
Fix by rejecting the frame early if the length is zero, or if it exceeds
adapter->rx_buffer_len. This preserves the TBI workaround semantics for
valid frames and prevents touching memory beyond the RX buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
| In subsys/debug/coredump/coredump_shell.c, print_coredump_hdr() used the 16-bit tgt_code field of a stored Zephyr coredump header directly as an index into coredump_target_code2str[], a fixed 7-element array of string pointers, with no bounds check.
A stored coredump whose tgt_code is >= 7 causes an out-of-bounds read of a char* up to ~64K entries past the array; that value is passed as the %s argument to shell_print, which dereferences and walks it as a string. The result is either disclosure of device memory contents to the shell user or a crash when the out-of-bounds pointer is unmapped.
The defect is reached via the coredump print shell command (cmd_coredump_print_stored_dump -> pretty_print_coredump -> parse_and_print_coredump -> print_coredump_hdr). The tgt_code field is device-generated and in-range during normal crash handling, so triggering requires local shell access plus the ability to stage or corrupt the stored coredump in the flash/in-memory backend.
Introduced in v4.2.0 (commit 13abd7fe730) and present through v4.4.0; fixed by clamping out-of-range codes to the 'unknown' (index 0) entry. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssi_module module. This vulnerability may exist when the Server-Side Includes (SSI), proxy_pass, and proxy_buffering off directives are configured. With this configuration, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to cause a use-after-free in the NGINX worker process. This issue may lead to limited modification of memory or a restart of the NGINX worker process.
Impact:
This vulnerability may allow remote attackers to have limited control to modify memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow
On the non-root path, __tb_property_parse_dir() takes dir_len from
entry->length (u16 widened to size_t). Two distinct OOB conditions
follow when entry->length < 4:
1. The non-root path begins with kmemdup(&block[dir_offset],
sizeof(*dir->uuid), ...) which always reads 4 dwords from
dir_offset. tb_property_entry_valid() only enforces
dir_offset + entry->length <= block_len, so a crafted entry
with dir_offset close to the end of the property block and
entry->length in 0..3 passes that gate but lets the UUID copy
run off the block (e.g. dir_offset = 497, dir_len = 3 in a
500-dword block reads block[497..501]).
2. After the kmemdup, content_len = dir_len - 4 underflows size_t
to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry
walk runs OOB on each iteration until an entry fails
validation or the kernel oopses on an unmapped page.
Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,
which closes both holes.
Also move INIT_LIST_HEAD(&dir->properties) up to immediately after
the dir allocation so the new error-return path (and the existing
uuid-alloc failure path) calling tb_property_free_dir() sees a
walkable list rather than the zero-initialized NULL next/prev that
list_for_each_entry_safe() would oops on. |
| A flaw was found in GStreamer's gst-plugins-good. A heap-based out-of-bounds read of 4 bytes can occur when parsing FLAC audio stream headers embedded in a Matroska or WebM container file. The vulnerability is triggered by a boundary check that does not account for the full size of the data being copied, allowing a small read past the end of the allocated buffer. An attacker could exploit this by crafting a malicious Matroska or WebM file and tricking a user into opening it, potentially leaking a small amount of adjacent heap memory. |
| In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, when the 'dnscrypt:' clause lists more 'dnscrypt-provider-cert:' files than there are matching 'dnscrypt-secret-key:' files, Unbound fills only the matched prefix and leaves the tail slots at the '0xdb' fill that libsodium's allocator writes into every allocation. Unbound would then iterate over the number of cert files, not the actual slots, so it walks into a slot with garbage data filled with '0xdb' bytes. Any unauthenticated client that sends one UDP datagram of ≥ 68 bytes whose first 8 bytes are '0xdb' to 'dnscrypt-port' will use that garbage entry which leads to a garbage dereference killing the server. This is a silent faulty configuration that goes unnoticed until triggered with the right client query. Unbound needs to be compiled with DNSCrypt support ('--enable-dnscrypt'). |
| In NLnet Labs Unbound up to and including version 1.25.1, when the validator builds the canonical RDATA form for an RRSIG-covered PX/RP/MINFO/SOA RRset, it computes the address of the second embedded domain name as 'datstart + dname_valid(datstart, ...)' and passes it straight to 'query_dname_tolower()' without checking that a second name is actually present in the RDATA. The wire-format parser accepts multi-dname RRs whose RDATA ends after the first name, so an attacker who runs a DNSSEC-signed authoritative server can deliver a record with an absent second domain name (e.g. SOA record) and cause 'query_dname_tolower()' to walk label-by-label through stale bytes in the per-worker 'env->scratch_buffer', past the end of that heap allocation if 'msg-buffer-size' has been lowered from the default. This leads to heap buffer overflow and on a release build the outcome relies heavily on the contents of the buffer tail and the adjacent heap chunk. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
The directory and Rock Ridge / SUSP walk in libfsimage's iso9660 driver
derives several lengths directly from attacker-controlled on-disk fields
without validating them:
* The directory loop itself assumes a good record length. This is
CVE-2026-42494.
* The calculation of the System Use area may underflow. This is
CVE-2026-42495.
* The Rock Ridge extension loop assumes a good (inner) record length.
This is CVE-2026-62423.
* The Rock Ridge NM record processing assumes a good entry length.
This is CVE-2026-62424.
* The Rock Ridge CE record processing assumes a good size and offset.
This is CVE-2026-62425. |
| Pterodactyl is a free, open-source game server management panel. Prior to Panel version 1.12.3 and Wings version 1.12.2, the Wings /upload/file endpoint accepted any valid panel-signed JWT that contained server_uuid, user_uuid, and unique_id claims without checking the token's intended purpose; because the Panel issues JWTs carrying those same claims for lower-privilege operations such as WebSocket authentication and file-download links, an authenticated subuser could reuse one of those tokens (for example a WebSocket token obtained with only the websocket.connect permission) by replaying it against /upload/file to write arbitrary files to the same server, despite never being granted the file.create permission. This issue is fixed in Panel version 1.12.3 and Wings version 1.12.2. |
| FFmpeg versions 4.4 through 8.1.2 contain an out-of-bounds memory access vulnerability in the ADX audio decoder within libavcodec/adxdec.c that allows attackers to trigger both out-of-bounds reads and writes by supplying a crafted ADX or AAX audio file with a mid-stream channel layout change. When AV_PKT_DATA_NEW_EXTRADATA side data is received mid-stream, the adx_decode_frame function re-parses the stream header but fails to update the internal channel state, causing subsequent decoding operations to access the prev[] state array using a stale channel count. |
| A flaw was found in the GNU Binutils (Binary Utilities) linker. This vulnerability, a heap-buffer-overflow read (CWE-125), occurs when the linker processes a specially crafted 32-bit XCOFF (Extended Common Object File Format) object file. An attacker could exploit this by providing a malicious file, leading to an out-of-bounds read of memory. This can result in information disclosure, potentially revealing sensitive heap data, and a Denial of Service (DoS) due to the linker crashing. |
| ardupilot through Plane-4.6.3 was found to contain an out-of-bounds read issue in libraries/GCS_MAVLink/GCS_serial_control.cpp in GCS_MAVLINK::handle_serial_control(). |
| A flaw was found in libXpm. A local user with low privileges could exploit an Out-of-Bounds Read vulnerability in the `xpmNextWord()` function by processing a specially crafted or very small XPM (X PixMap) image file. This improper validation of file boundaries can cause an internal pointer to read beyond the file's end, leading to application crashes and Denial of Service conditions. |
| Out-of-bounds read, Reachable assertion vulnerability in Samsung Open Source Escargot allows Overread Buffers, Input Data Manipulation.
This issue affects Escargot: before 2dee22f5c7b8bf31cb7252d7731fae8c07f2842c. |
| Insufficient validation of untrusted input in Media in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| Cesanta Mongoose before 7.22 contains an out-of-bounds read in the built-in TLS server function mg_tls_server_recv_hello(), which uses an attacker-controlled session_id_len byte from a TLS ClientHello as a buffer index without validating it against the length of received data. A remote, unauthenticated attacker can send a single crafted ClientHello with an oversized session id length to read past the receive buffer, crashing any HTTPS, MQTTS, or WSS service built on MG_TLS_BUILTIN. |
| libssh2 through 1.11.1, fixed in commit a13bb6c, contains a missing bounds check vulnerability that allows a malicious SSH server to trigger an arbitrary-length heap out-of-bounds read and a free of an uninitialized pointer via the publickey subsystem. In libssh2_publickey_list_fetch(), the version 1 response parser reads a server-controlled comment_len value and advances the parse pointer without verifying sufficient bytes remain in the buffer, causing the out-of-bounds read to leak heap pointers from adjacent allocations defeating ASLR, followed by heap allocator state corruption when the error cleanup path frees an uninitialized pointer from a non-zeroed realloc() region. |
