| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't resurrect a scalar id dropped by collect_linked_regs()
check_cond_jmp_op() copies the compared registers into
env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies
those snapshots back into both branch states afterwards.
collect_linked_regs() records at most LINKED_REGS_MAX members of a
linked registers group in the jump history and calls clear_scalar_id()
for every member that does not fit. The compared register is not exempt
from that.
As a consequence, sync_linked_regs() might adjust ranges for more
registers than bpf_bt_sync_linked_regs() can propagate precision to.
Collect the linked registers before the snapshots are taken instead.
This might lead to some unnecessary clear_scalar_id's, but from
previous testing situations with many linked registers are
extremely rare. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, a connection configured to permit mac=none can negotiate it with a MAC-requiring CTR or CBC block cipher because the selection logic validates needs_mac() only when MAC selection fails. A remote peer can then send a packet with a decrypted length of zero, causing russh/src/cipher/mod.rs to shrink the previously read block before indexing buffer.buffer[16..], which panics and terminates the connection task. This issue is fixed in version 0.63.1. |
| Flatpak writes the OCI repository authentication token with world-readable permissions (0644) in the system-helper's cache directory, allowing other local users on a multi-user system to read the token and impersonate the authenticated user against the OCI repository. Only OCI-based sources (e.g. as used by Fedora) are affected; libostree-based sources such as Flathub are not. |
| Improper removal of sensitive information before storage or transfer vulnerability in Wikimedia Foundation's Mediawiki - FlaggedRevs extension through 1.46.0. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Mediawiki - Cargo extension allows Reflected XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Mediawiki - Cargo extension allows Stored XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| Any host on the LAN can send two mDNS records and make the responder write past the end of its
transmit packet.
The string table stores each name in a slot rounded up to a multiple of four:
```c
/* addons/mdns/nxd_mdns.c:11436, 11443, 11447 */
memory_len = ((memory_len & 0xFFFFFFFC) + 8) & 0xFFFFFFFF;
...
len = *((USHORT*)(p - 2)); /* slot size, not string length */
if ((len == memory_len) && ... _nx_mdns_name_match(start, memory_ptr, memory_size) ...)
```
The lookup that decides whether an incoming name is already stored compares the rounded slot size,
so names of 12, 13, 14 and 15 characters share one bucket. A second name in the bucket is answered
with the pointer to the first, and the record then carries a string up to three bytes longer than
the length the caller accounted for. `_nx_mdns_packet_rr_add` (nxd_mdns.c:8911) sizes its only
bound check from that stale length, and `_nx_mdns_name_string_encode` writes the real string.
Two PTR records are enough, both ordinary mDNS responses to a `_http._tcp` query, with owner names
whose lengths fall in the same bucket:
```
==87491==ERROR: AddressSanitizer: heap-buffer-overflow
WRITE of size 1 at 0x611000000124 thread T5
#0 _nx_mdns_name_string_encode addons/mdns/nxd_mdns.c:13096
#1 _nx_mdns_packet_rr_add addons/mdns/nxd_mdns.c:8911
0x611000000124 is 0 bytes to the right of 228-byte region
```
The overflow is one to three bytes of attacker-influenced name data past `nx_packet_data_end`. In a
normal pool that lands in the next packet in the same pool rather than in a redzone, so the visible
effect is a corrupted neighbouring packet or a corrupted pool free list rather than a clean crash.
Compare the slot size against the stored string length before declaring a match, or keep the
string length in the slot header and return it to the caller so the encoder and the bound check
agree. |
| Improper link resolution (CWE-59 / CWE-22) in the allowedLocalRoots path validation in Google MCP Toolbox for Databases versions 1.2.0 through 1.9.0 allows a remote authenticated attacker with tool execution permissions to bypass directory boundary restrictions via symbolic links. Because path validation checks directories lexically without resolving symbolic links first, an attacker can access or overwrite arbitrary local files located outside the permitted root directories. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| A weakness has been identified in mathurvishal CloudClassroom-PHP-Project up to 5dadec098bfbbf3300d60c3494db3fb95b66e7be. The impacted element is an unknown function of the file loginlinkfaculty.php of the component Faculty Authentication. Executing a manipulation of the argument fid/pass can lead to sql injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Sanluan PublicCMS up to 6.202506.e. This vulnerability affects the function CmsContentAdminController of the file publiccms-parent/publiccms-core/src/main/java/com/publiccms/controller/admin/sys/SysUserAdminController.java of the component exportExcel/exportData. This manipulation of the argument userId/deptId causes authorization bypass. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Flatpak passes through arbitrary vendor-extension keys unmodified when exporting an application's Desktop Entry (.desktop) and D-Bus Service (.service) files, instead of validating against an allowlist. A malicious Flatpak app can use this to cause denial of service (e.g. forced application restart loops) or to influence host D-Bus/systemd activation behavior beyond what the sandbox is intended to permit. |
| FriendsOfFlarum OAuth allows users to log in to Flarum with GitHub, Twitter, Facebook, and other providers. Prior to 1.7.4 and 2.0.0-beta.4, the Discord OAuth provider does not check the verified field returned for an OAuth email before passing the address to Flarum core as trusted through provideTrustedEmail(). When Discord sign-in is enabled, an unauthenticated attacker who knows the email address of a Flarum user can configure a Discord account with that unverified address and a verified phone number, then sign in to cause Flarum to match the trusted address, link the attacker-controlled Discord identity to the existing user, and authenticate as the victim without a password or victim interaction. Exploitation requires that the victim's email address is not already associated with a Discord account, and it can compromise administrator accounts. Other bundled providers were not confirmed to be practically exploitable by this method because their relevant authentication flows return only verified or confirmed email addresses. This issue is fixed in versions 1.7.4 and 2.0.0-beta.4. |
| The ConvertPlus plugin for WordPress is vulnerable to Deserialization of Untrusted Data in all versions up to, and including, 3.6.3 via the style parameter of the cp_display_preview_modal AJAX action. The vulnerability exists because the action's nonce guard is gated behind an isset() check and fails open when the cp_admin_page_nonce parameter is omitted entirely, no capability check is performed on the callback, and sanitize_text_field() — applied to the $style value before it is concatenated directly into a shortcode string evaluated by do_shortcode() — does not strip shortcode delimiters, allowing an attacker to inject a second, fully attacker-controlled [smile_modal] invocation that causes smile_modal_popup() to pass attacker-supplied base64-decoded bytes to maybe_unserialize() with no allowed_classes restriction. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject a PHP object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| InvoicePlane is a self-hosted open source application for managing invoices, clients, and payments. Prior to 1.7.2, InvoicePlane's Cron::recur() method writes an invalid cron key from the URL path directly to the application log without neutralizing CRLF characters. An unauthenticated requester can place forged log lines into the audit trail by supplying a crafted cron_key value. The injected entries can corrupt forensic records and interfere with log-based monitoring. This issue is fixed in version 1.7.2. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, a user with Knowledge Base editing rights for a category can embed a video widget in a published answer with a specially crafted value. When the answer is rendered, that value is inserted into the page's HTML without being escaped for its attribute context, allowing it to break out and inject additional HTML into the page. When another user who has permission to switch between user sessions views the affected answer, the injected HTML causes their browser to silently send a request to Zammad's session-switching endpoint using their own active credentials. This results in switching their session to an account chosen by the person who wrote the Knowledge Base answer. No action is required from the viewer beyond opening the published answer. This issue is fixed in version 7.1.2. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, unsanitized option labels are rendered in the configuration dialogs of AI Agents within Zammad's admin UI. When rendering the list of selected options, the option label is output as raw HTML without escaping. An attacker who can control an option label, for example by setting a malicious string as a user or organization name used in a relation attribute, or by supplying a crafted custom attribute option value, can inject arbitrary HTML and JavaScript. The payload executes in the browser of any admin or agent who opens the affected object attribute configuration view. This issue is fixed in version 7.1.2. |